Thermal conductivity and specific heat of amorphous Zr0.67Ni0.33 after structural relaxation

Low-temperature measurements of the thermal conductivity (0.3KT5K) and of the specific heatC (0.07KT3.5K) of splat-cooled amorphous superconducting Zr_0.67Ni_0.33(T _c 2.7K) after different annealing stages are reported. increases progressively (up to 55%) after annealing. An analysis of with the help of normal-state measurements belowT _c in an overcritical field shows that the phonon-electron scattering remains unaltered after annealing. Hence the increase in must be entirely attributed to structure-induced (intrinsic) scattering, i.e. by two-level tunneling states (TLS) at low temperatures (T1K). The specific heat shows a small decrease aboveT _c (by 8%) which is attributed to a small diminution of the electronic density of states at the Fermi level and to a small increase in the Debye temperature. ForTT _c where TLS dominate, the specific heatC decreases less upon annealing than expected from the increase of in the standard tunneling model. This points to a change in the TLS relaxation time spectrum upon annealing, as observed previously for Zr _x Cu_1–x glasses.     

Isoelectric focusing of apolipoproteins in immobilized pH gradients: improved determination of apolipoprotein E phenotypes

A method for isoelectric focusing of apolipoprotein E in an immobilized pH gradient with added carrier ampholytes has been developed. This method is an improvement over conventional isoelectric focusing of apolipoprotein E with respect to resolution, reproducibility, and simplicity. Since monosialo isoforms are resolved from the normally cofocusing asialo isoforms, unique patterns are obtained for all 6 common apolipoprotein E phenotypes. The method can also be applied to the screening of apolipoprotein A and C isoforms. Delipidated very low density lipoproteins (VLDL) have been used as the source of apolipoprotein E and C. Apolipoprotein A isoforms were focused directly from detergent-treated serum. Immunodetection of apolipoprotein E using capillary transfer was found to be compatible with the described method.     

Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology

Recently, a new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample spotting technique for poly(ethylene glycol), offering improved analysis possibilities, was described. In this contribution the application of ink-jet printing to automated, multiple-layer MALDI-TOFMS sample preparation of synthetic polymers is presented, allowing accurate deposition of matrix, additive and analyte solutions. The new sample preparation technique was evaluated for poly(ethylene glycol) as well as poly(methyl methacrylate) standards, and optimized settings for both synthetic polymers have been obtained.     

The separation of palladium and platinum by ion flotation

Differences in the ion flotation properties of palladium(II) and platinum(IV) chloro complexes in aqueous solutions are used to achieve separations of these metals. The anionic chloro complex PtCl^2-₆ is floated selectively with cationic surfactants of the type, RNR'₃Br, from solutions of PdCl^2-₄ and various concentrations of hydrochloric acid. The palladium(II) does not float from solutions of ? 3.0 M HCl and the platinum(IV) floated from these solutions can be recovered free of palladium. However, the separation is incomplete as much of the platinum(IV) is also unfloated from these solutions. Quantitative separations are obtained by conversion of the palladium(II) to the cationic ammine, Pd(NH₃)₄²⁺ with aqueous ammonia prior to flotation. The anionic chloro complex of platinum(IV) is unaffected by the presence of ammonia and is floated quantitatively with the surfactant n-hexadecyltri-n-propylammonium bromide from 0.01 M ammonia solutions.     

Two-dimensional capillary gas chromatography without intermediate trapping. Electron capture detector quantitation of an amino alcohol (KABI 2128) in serum after trifluoroacetylation

A two- dimensional gas chromatograph based on the Deans switching principle is described. The unit comprises two separate ovens, each containing a fused silica capillary column. The columns are joined in a specially designed manifold permitting heart cuts to be performed without significant decrease in efficiency. The switching speed and the retention time stability of the system made it possible to perform heart cuts of only a few seconds' duration. The system has been used under isothermal conditions for the determination of an amino alcohol (KABI 2128) in the low ng/ml range after trifluoroacetylation and with electron capture detection. A much shorter clean-up procedure could be used in combination with the two-dimensional gas chromatograph as compared to a method using a single glass capillary column.     

Dispersion phenomena in reactors for flow analysis

Both coiled open tubular reactors and packed-bed reactors can be used in flow analysis. Band broadening and pressure drop in these reactors are discussed. Theoretical analysis shows that packed-bed reactors are to be preferred. It is shown that for a given residence time and equal band-broadening values the pressure drop over a packed-bed reactor is lower than over a coiled open tubular reactor. Rules for optimal design are given for coiled tubular reactors and packed-bed reactors. The application of both reactors is shown for the spectrophotometric determination of phosphate with a vanadomolybdate reagent yielding a yellow colour.     

On [Na(POCl3)4]+ Complex Ion Formation: Conductivity,Raman, and NMR studies in the system phosphoryl chloride–sodium tetrachloro aluminate and related compounds

The system POCl₃–NaAlCl₄ was investigated by measuring the conductivity and the Raman and NMR spectra (²⁷Al, ²³Na and ³¹P) as a function of the mol fraction x of NaAlCl₄ in POCl₃. Additionally, Raman spectra of POCl₃ solutions of NaFeCl₄, LiAlCl₄, LiFeCl₄, and KAlCl₄ were recorded. In solutions containing Li⁺ or Na⁺ ions a liquid to solid (or jelly) phase transition was observed under certain conditions, dependent on salt concentration and temperature. Observed changes in the Raman spectra of the electrolyte solutions in comparison to the pure solvent POCl₃ demonstrate the existence of interactions. Clearly, the POCl₃ eigenfrequencies and hence the molecules are pertubed. The formation of [M(POCl₃)₄]⁺ complexes (M = Li, Na) can be deduced from the Raman measurements. NMR investigations support this conclusion. For assigning of Raman spectra, (Li⁺, K⁺) cation and ([FeCl₄]^?, [SbCl₆]^?) anion substitutions were employed.     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

The solvent venting injection technique in capillary supercritical fluid chromatography

A solvent venting technique for injection of volumes up to 1 μl on 50 μm i.d. SFC columns has been compared to direct injection methods. The peak broadening and peak splitting observed with direct injection have been examined and found to be related to the starting pressure, the column temperature, and the sample solvent, in addition to the sample volume. The solvent venting technique removed peak splitting and improved the column efficiency. With a proper selection of experimental conditions, the sample recovery was 100%. The major part of the solvent was eluted in 15–20 s. Several applications have been demonstrated.     

Inter- and intramolecular potential for the N-formylglycinamide-water system. A comparison between theoretical modeling and empirical force fields

An intramolecular NEMO potential is presented for the N-formylglycinamide molecule together with an intermolecular potential for the N-formylglycinamide-water system. The intramolecular N-formylglycinamide potential can be used as a building block for the backbone of polypeptides and proteins. Two intramolecular minima have been obtained. One, denoted as C5, is stabilized by a hydrogen bonded five member ring, and the other, denoted as C7, corresponds to a seven membered ring. The interaction between one water molecule and the N-formylglycinamide system is also studied and compared with Hartree-Fock SCF calculations and with the results obtained for some of the more commonly used force fields. The agreement between the NEMO and SCF energies for the complexes is in general superior to that of the other force fields. In the C7 region the surfaces obtained from the intramolecular part of the commonly used force fields are too flat compared to the NEMO potential and the ab initio calculations. We further analyze the possibility of using a charge distribution obtained from one conformation to describe the charge distribution of other conformations. We have found that the use of polarizabilities and generic dipoles can model most of the changes in charge density due to the different geometry of the new conformations, but that one can expect additional errors in the interaction energies that are of the order of 1 kcal/mol.