CsxH3-xPW12O40的孔结构

Ｎ２静态吸附容量法的测定结果表明，磷钨酸铯盐（ＣｓｘＨ３－ｘＰＷ１２Ｏ４０）的孔窝和孔分布与ｘ值的大小相关。ｘ〈１．５的ＣｓｘＨ３－ｘＰＷ１２Ｏ４０孔容相近，孔分布近似；当ｘ〉１．５时，ＣｓｘＨ３－ｘＰＷ１２Ｏ４０的孔主要是孔径小于１０ｎｍ的中孔和微孔，平均孔径及孔容随ｘ的增加而增大。ＳＥＭ和ＴＥＭ的观测结果表明，ＣｓｘＨ３－ｘＰＷ１２Ｏ４０的孔是微细粒子堆积留下的空隙孔，可能不存在晶内孔。     

ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

淫羊藿根与叶活性成分的分析和比较

采用细胞膜色谱法（ＣＭＣ）筛选，并结合离体药理实验确定主要活性成分，利用高效液相色谱法分析比较了淫羊藿根与叶中的活性成分及其差异性．色谱条件为Ｋｒｏｍａｓｉｌ ＯＤＳ 柱（１５０ ｍｍ× ４．６ ｍｍ．Ｉ．Ｄ ）流动相甲醇－水（７０：３０，Ｖ：Ｖ）；检测波长２７０ｎｍ。筛选发现淫羊藿根中的两个有效成分ＹＹＨ－２１４和ＹＹＨ－２１６对血管有较强的舒张作用，表明活性成分在ＣＭＣ模型体系中的保留特性与药理作用之间存在良好的相关性。在此色谱条件下淫羊藿叶未检测到这两种活性成分．     

Microemulsion-mediated solvothermal synthesis of SrCO3 nanostructures

The controlled synthesis of SrCO3 nanostructures with different morphologies, such as rodlike, whiskerlike, ellipsoidlike, and spherelike, were successfully achieved by the cationic surfactant-CTAB-microemulsion-mediated solvothermal method. Various comparison experiments showed that fundamental experimental parameters, such as the molar ratio of H2O to CTAB and the concentration of reactants, played important roles in the morphological control of SrCO3 nanostructures. A lower molar ratio of H2O to CTAB favors rodlike products, whereas a higher molar ratio generally leads to the formation of spherical products. A rational mechanism based on fusion, aggregate, and coalescence of microemulsion droplets is proposed for the selective formation of various morphologies. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and field-emission scanning electron microscope (FE-SEM) were used to characterize the products.     

Heat transfer from a rarefied plasma flow to a metallic or nonmetallic particle

Heat transfer from a plasma flow to a metallic or nonmetallic spherical particle is studied in this paper for the extreme case of free-molecule flow regime. Analytical expressions are derived for the heat flux due to, respectively, atoms, ions, and electrons and for the floating potential on the sphere exposed to a two-temperature plasma flow. It has been shown that the local or average heat flux density over the whole sphere is independent of the sphere radius and approximately in direct proportion to the gas pressure. The presence of a macroscopic relative velocity between the plasma and the sphere causes substantially nonuniform distributions of the local heat flux and enhances the total heat flux to the sphere. The heat flux is also enhanced by the gas ionization. Appreciable difference between metallic and nonmetallic spheres is found in the distributions along the oncoming flow direction of the floating potential and of the local heat flux densities due to ions and electrons. The total heat flux to the whole sphere is, however, almost the same for these different spheres. For a fixed value of the electron temperature, the heat flux decreases with increasing temperature ratio T_e/T_h.     

Growth of porous single-crystal Cr2O3 in a 3-D mesopore system

Single-crystal Cr2O3 with regular mesopores has been synthesized using mesoporous silica KIT-6 as a template and characterized by using XRD, HRTEM and nitrogen adsorption/desorption.     

稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

Ge—132对小鼠H22肝癌移植瘤的影响

Ｇｅ－１３２对小鼠Ｈ２２肝癌移植瘤的实验研究证明：１．Ｇｅ－１３２对Ｈ２２肝癌移植瘤有一定的抑制作用，３００ｍｇ／ｋｇ体重剂量抑瘤率达到３６．１９％；２．增强机体的抗氧化作用，抑制脂质的过氧化物水平；３．促进免疫功能，当Ｇｅ－１３２和环磷酰胺联合使用时，可抵抗环磷酰胺的免疫抑制作用，而且并不减弱其抑制瘤作用。     

Light-emitting diode-induced fluorescence detection of native proteins in capillary electrophoresis

A continuous-wave 280 nm light-emitting diode (LED) was used as the excitation source for native fluorescence detection of proteins in CE. The operating current and temperature of the LED were optimized in order to achieve high luminescence power. It was found that a forward current of 30 mA and a temperature of approximately 5 degrees C gave the best S/N. By using a set of two ball lenses to focus light from the LED, we achieved a spot of approximately 200 mum with a power of 0.1-0.2 mW on the detection window. Fluorescence was collected with a ball lens at 90 degrees angle through a bandpass filter onto a photomultiplier tube. In CZE an LOD of 20 nM for conalbumin was reached. In capillary gel electrophoresis all eight proteins from a commercial standard kit were detected with high S/N. For a 10 microg/mL total protein mixture, S/N was better than 3 for all proteins in solution. Further improvement in LOD should be possible on utilization of an LED with higher luminescence power.     

Electrochemical properties and synthesis of LiAl0.05Mn1.95O3.95F0.05 by a solution-based gel method for lithium secondary battery

The cathode materials, LiMn₂O₄, LiAl_0.05Mn_1.95O₄ and LiAl_0.05Mn_1.95O_3.95F_0.05 were firstly prepared by a simple solution-based gel method using the mixture of acetate and ethanol as the chelating agent. The synthesized samples were investigated by X-ray diffraction, scanning electronic microscope and differential and thermal analysis. The as-prepared powders were used as positive materials for lithium-ion battery, whose discharge capacity and cycle voltammogram properties were examined. The results revealed that LiAl_0.05Mn_1.95O_3.95F_0.05 synthesized by the solution-based gel method had higher initial capacity than LiAl_0.05Mn_1.95O₄ and better capacity retention rate (92%) than that of LiAl_0.05Mn_1.95O₄ and LiMn₂O₄, which revealed that Al and F dual-doped LiMn₂O₄ could gain better electrochemical properties of LiMn₂O₄ than only the Al-doped LiMn₂O₄.