Tension–compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior

In-plane tension and compression experiments on copper alloy sheets (phosphor bronze) and 6000 series aluminum alloy sheets (AA6016-T4) were conducted using a specially designed testing apparatus. The apparatus is equipped with comb-type dies so that stress–strain curves of a sheet specimen subjected to tension followed by compression, and vice versa, can be measured without buckling of the specimen, as well as those for monotonic tension and compression. A difference was observed in the flow stresses between tension and compression for the as-received copper alloy, but not for the aluminum alloy. Moreover, stress reversal tests, such as tension followed by compression and compression followed by tension, were carried out in order to measure the Bauschinger effect. In the second part of the experiment, bending moment–curvature diagrams were measured for the as-received and pre-stretched specimens. The bending moment–curvature diagrams were compared with those calculated using the stress–strain curves obtained from the tension–compression tests, and were in good agreement with those calculated with the tension–compression asymmetry and the Bauschinger effect correctly reproduced.     

Synthesis of conjugated polymers possessing diketopyrrolopyrrole units bearing phenyl,pyridyl, and thiazolyl groups by direct arylation polycondensation: Effects of aromatic groups in DPP on physical properties

Conjugated polymers containing phenyl‐, pyridyl‐, and thiazolyl‐flanked diketopyrrolopyrrole (DPP) were synthesized by direct arylation polycondensation of 3,4‐ethylenedioxythiophene derivatives and dibrominated DPP‐based monomers, in order to probe the effects of the aromatic groups in the DPP units on the absorption property, energy level, and crystallinity. A polymer possessing thiazolyl‐flanked DPP units was found to display long‐wavelength absorption properties and higher crystallinity than the polymers bearing phenyl‐ and pyridyl‐flanked DPP units. These features of the thiazolyl‐based polymer were afforded by its coplanar structure of the main chain. The synthesized polymers showed semiconducting properties in organic field effect transistors and organic photovoltaics. Direct arylation polycondensation is an efficient synthetic method that affords a series of DPP‐based polymers in a simple fashion and, thus, helping in a comprehensive understanding on the relationship between the aromatic groups in DPP units and their physical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2337–2345     

Band asymptotics of eigenvalues for the Zoll manifold

It is well known that the spectrum of the Laplace-Beltrami operator for a Zoll metric on the sphere consists of clusters of eigenvalues. This Letter considers the asymptotic band structure of these clusters and gives a explicit formula for it on the basis of the theory of Hamiltonian dynamical systems and symbol calculations of pseudodifferential operators.     

A simple and portable colorimeter using a red-green-blue light-emitting diode and its application to the on-site determination of nitrite and iron in river-water.

A portable colorimeter using a red-green-blue light-emitting diode as a light source has been developed. An embedded controller sequentially turns emitters on and off, and acquires the signals detected by two photo diodes synchronized with their blinking. The controller calculates the absorbance and displays it on a liquid-crystal display. The whole system, including a 006P dry cell, is contained in a 100 x 70 x 50 mm aluminum case and its mass is 280 g. This colorimeter was successfully applied to the on-site determination of nitrite and iron in river-water.     

Effect of alkali metal ions on photochromic behavior of bisviologen-incorporated oligo-oxyethylene units

Two bisviologen derivatives, 1,11-bis(N-propyl-4,4'-bipyridinium)-3,6,9-trioxaundecane tetrakis-(hexafluorophosphate) (1) and 1,8-bis(N-propyl-4,4'-bipyridinium)-3,6-dioxaoctane tetrakis-(hexafluorophosphate) (2), each incorporating trioxaundecane and dioxaoctane groups between two viologen units, respectively, were prepared so that their photochromic behavior in the absence and the presence of alkali metal ions in a thin polymer film could be investigated. Photoirradiation of the films containing 1 and 2 caused color changes from pale yellow to blue, associated with the photoinduced reduction of the viologen units from the dication to the radical cation. The addition of alkali metal ions, especially, K+ and Na+, caused change in the spectra of the photoreduced viologen radical cation for 1 and 2, respectively, because of the increase in the fractional amplitude for the dimer component of the radical cation rather than the monomer one. This may be related to the guest-induced conformational change of 1 and 2, in which the alkali metal ion is surrounded by the oligo-oxyethylene unit of 1 and 2. The regulation in photochromic properties of viologen derivatives can be achieved by addition of alkali metal ions.     

Electrical conductivities of potassium ferrites doped with divalent metal oxide

The electronic and ionic conduction in three kinds of potassium ferrites with β-alumina structure was studied. Undoped ferrite, K₂O·6Fe₂O₃, prepared by sintering at 1400°C after prefiring a mixture of potassium carbonate and ferric oxide, was a mixed conductor with about 1% ionic conduction and predominantly electronic conduction. The nickel- or zinc-doped potassium ferrite showed decreasing conductivity in the range of a single phase as the content of dopant increased. Variations of the electronic conduction in the doped potassium ferrites were assigned to changes of ferrous ion concentration accompanied by structural changes in the spinel-like blocks. Potassium ion conductivities of the three sorts of samples were estimated from the total conductivities and the transport numbers obtained by dc-polarization technique and electrolysis method. The decreases of the ionic conductivities were explained by narrowing of the alkali-oxygen slot caused by doping.     

Simulation of solid–fluid mixture flow using moving particle methods

A new basic framework for solid–fluid mixture flow simulation was developed using moving particle methods. The interactions between solid and fluid were modeled by the finite volume particle (FVP) method. The distinct element method (DEM) together with a multi-time-step algorithm was introduced into the FVP method to calculate the effects of contact between solid bodies and between solid bodies and walls. The introduced DEM model was verified by experimental analyses for the collapse of multiple solid cylinder layers. The proposed algorithm using the optimized DEM model was then applied to a water dam breaking, involving multiple solid cylinder layers. A comparison between experiments and simulations demonstrated the DEM model introduced into the FVP method is effective in representing solid–fluid mixture flows reasonably well.