The influence of organic sample solvents on the separation efficiency of basic compounds under strong cation exchange mode

This study investigated the influence of organic sample solvents on separation efficiency of basic compounds under strong cation exchange (SCX) mode. The mixtures of acidic aqueous solution and organic solvent such as acetonitrile, ethanol, methanol and dimethyl sulfoxide (DMSO) were tested as sample solvents. For later-eluting analytes, the increase of sample solvent elution strength was responsible for the decrease of separation efficiency. Thus, sample solvents with weak elution strength could provide high separation efficiencies. For earlier-eluting analytes, the retention of organic sample solvents was the main factor affecting separation efficiency. Weakly retained solvents could provide high separation efficiency. In addition, an optimized approach was proposed to reduce the effect of organic sample solvent, in which low ionic solvent was employed as initial mobile phase in the gradient. At last, the analysis of impurities in hydrophobic drug berberine was performed. The results showed that using acidic aqueous methanol as sample solvents could provide high separation efficiency and good resolution (R > 1.5).     

Molecular beacon mediated circular strand displacement strategy for constructing a ratiometric electrochemical deoxyribonucleic acid sensor

A novel ratiometric electrochemical sensor for sensitive and selective determination of deoxyribonucleic acid (DNA) had been developed based on signal-on and signal-off strategy. The target DNA hybridized with the loop portion of ferrocene (Fc) labeled hairpin probe immobilized on the gold electrode (GE), the Fc away from the surface of GE and the methylene blue (MB) was attached to an electrode surface by hybridization between hairpin probe and MB labeled primer. Such conformational changes resulted in the oxidation peak current of Fc decreased and that of MB increased, and the changes of dual signals are linear with the concentration of DNA. Furthermore, with the help of strand-displacement polymerization, polymerase catalyzed the extension of the primer and the sequential displacement of the target DNA, which led to the release of target and another polymerization cycle. Thus the circular strand displacement produced the multiplication of the MB confined near the GE surface and Fc got away from the GE surface. Therefore, the recognition of target DNA resulted in both the “signal-off” of Fc and the “signal-on” of MB for dual-signal electrochemical ratiometric readout. The dual signal strategy offered a dramatic enhancement of the stripping response. The dynamic range of the target DNA detection was from 10⁻¹³ to 10⁻⁸ mol L⁻¹ with a detection limit down to 28 fM level. Compared with the single signaling electrochemical sensor, the dual-signaling electrochemical sensing strategy developed in this paper was more selective. It would have important applications in the sensitive and selective electrochemical determination of other small molecules and proteins.     

Chiral Separations in Normal‐phase Liquid Chromatography: Updating a Screening Strategy with a Chlorine‐containing Polysaccharide‐based Selector

The screening conditions of an existing column and mobile phase selection strategy for chiral compounds in normal‐phase high performance liquid chromatography (NP‐HPLC) were tested for their applicability on Chiralpak IC, which is a chiral stationary phase (CSP) made by immobilising cellulosic tris (3,5‐dichlorophenyl‐carbamate) on silica gel. In this study, the applicability of the optimization steps of the existing separation strategy was examined using 36 compounds representing the three possible resolution situations that occur after screening. The cumulative number of separated compounds is 27 (75.0 %), and the cumulative number of baseline separated compounds is 19 (52.8 %).     

An effective colorimetric and ratiometric fluorescent probe for bisulfite in aqueous solution

We have developed the first two-photon colorimetric and ratiometric fluorescent probe, BICO, for the detection of bisulfite (HSO₃⁻) in aqueous solution. The probe contains coumarin and benzimidazole moieties and can detect HSO₃⁻ based on the Michael addition reaction with a limit of detection 5.3 × 10⁻⁸ M in phosphate-buffered saline solution. The probe was used to detect bisulfite in tap water, sugar and dry white wine. Moreover, test strips were made and used easily. We successfully applied the probe to image living cells, using one-photon fluorescence imaging. BICO overcomes the limitations in sensitivity of previously reported probes and the solvation effect of bisulfite, which demonstrates its excellent value in practical application.     

Paecilomycines A and B,Novel Diterpenoids,Isolated from Insect‐Pathogenic Fungi Paecilomyces sp. ACCC 37762

Two new diterpenoids, named paecilomycine A ( 1 ) and paecilomycine B ( 2 ), including a novel skeleton with a five‐membered lactone ring, together with three known labdane diterpenoids, rel‐(1R,3S,4aS,5R,8aS)‐5‐[(3E)‐4‐carboxy‐3‐methylbut‐3‐en‐1‐yl]decahydro‐3‐hydroxy‐1,4a‐dimethyl‐6‐methylidenenaphthalene‐1‐carboxylic acid ( 3 ), botryosphaerin E ( 4 ), and agathic acid ( 5 ), were isolated from solid culture of the insect pathogenic fungi strain Paecilomyces sp. The structures of all compounds were established on the basis of comprehensive spectroscopic studies. The relative configurations of 1 and 2 were determined by single‐crystal X‐ray diffraction analyses.     

Direct Conversion of Bulk Metals to Size‐Tailored,Monodisperse Spherical Non‐Coinage‐Metal Nanocrystals

Monodisperse non‐noble metal nanocrystals (NCs) that are highly uniform in shapes and particle size are much desired in various advanced applications, and are commonly prepared by either thermal decomposition or reduction, where reactive organometallic precursors or/and strong reducing agents are mandatory; however, these are usually toxic, costly, or suffer a lack of availability. Bulk Group 12 metals can now be converted into ligand‐protected, highly crystalline, monodisperse spherical metal NCs with precisely controlled sizes without using any precursors and reducers. The method is based on low‐power NIR‐laser‐induced size‐selective layer‐by‐layer surface vaporization. The monodisperse Cd NCs show pronounced deep‐UV (DUV) localized surface plasmon resonance making them highly competitive DUV‐plasmonic materials. This approach will promote appreciably the emergence of a wide range of monodisperse technically important non‐coinage metal NCs with compelling functionalities.     

Thermo-sensitive poly(DEGMMA-co-MEA) microgels: Synthesis,characterization and interfacial interaction with adsorbed protein layer

The novel microgels, poly[di(ethylene glycol) methyl ether methacrylate-co-2-methoxyethyl acrylate] poly(DEGMMA-co-MEA) microgels, were synthesized. The poly(DEGMMA-co-MEA) microgels were thermo-sensitive and exhibited a volume phase transitive temperature(VPTT) of 14–22 ?C. The incorporation of hydrophobic comonomer MEA shifted the VPTT of poly(DEGMMA-co-MEA) microgels to lower temperatures. The interfacial interaction of poly(DEGMMA-co-MEA) microgels and three model proteins, namely fibrinogen, bovine serum albumin and lysozyme, was investigated by quartz crystal microbalance(QCM). An injection sequence of "microgel-after-protein" was then established for the real-time study of the interaction of proteins and the microgels at their swollen and collapsed states by using QCM technique. The results indicated that the interfacial interaction of poly(DEGMMA-co-MEA) microgels and adsorbed protein layers was mainly determined by the electrostatic interaction. Because poly(DEGMMA-co-MEA) microgels were negatively charged in Tris-HCl buffer solution(p H = 7.4), the microgels did not adsorb on negatively charged fibrinogen and bovine serum albumin layers but strongly adsorbed on positively charged lysozyme layer. Stronger interaction between lysozyme and the microgels at collapsed state(i.e. at 37 ?C) was observed. Furthermore, the incorporation of MEA might weaken the interaction between poly(DEGMMA-co-MEA) microgels and proteins.     

Flame-retardant Wrapped Ramie Fibers towards Suppressing “Candlewick Effect” of Polypropylene/Ramie Fiber Composites

In this work, a flame-retardant polypropylene(PP)/ramie fiber(RF) composite was prepared. The ramie fibers were wrapped chemically by a phosphorus- and nitrogen-containing flame retardant(FR) produced via in situ condensation reaction so as to suppress their candlewick effect. Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM) demonstrated that the ramie fibers wrapped chemically by FR(FR-RF) were obtained successfully. Thermogravimatric test showed that the PP/FR-RF composite had more residue and better thermal stability at high temperatures than the PP/RF composite. Cone calorimeter(CC) results indicated that the peak of heat release rate(PHRR) and total heat release(THR) correspondingly decreased by 23.4% and 12.5% compared with the values of neat PP/RF. The PP/FR-RF composite created a continuous and compact char layer after the combustion. Combining FTIR analysis of char residue after CC test with heat conduction coefficient results, it could be concluded that the charring of FR on RF greatly weakened the candlewick effect of RF, and more char residue in the RF domain facilitated the formation of more continuous and compact char layer in the whole combustion zone, consequently protected PP composites during combustion, resulting in the better flame retardancy of PP/FR-RF composite than that of PP/RF composite.     

Formation of a vanillic Mannich base — theoretical study

One-pot anti-Mannich reaction of vanillin, aniline and cyclohexanone was successfully catalyzed by ionic liquid triethanolammonium chloroacetate, at room temperature. Yield of the obtained Mannich base was very good and excellent diastereoselectivity was achieved. Mechanism of the reaction was investigated using the density functional theory. The reaction started with a nucleophilic attack of aniline nitrogen at the carbonyl group of vanillin. The intermediate α-amino alcohol formed in this way was further subjected to protonation by the triethanolammonium ion yielding the imminium ion. Theoretically, the obtained imminium ion and the enol form of cyclohexanone can build the protonated Mannich base via the anti and syn pathways. The chloroacetic anion spontaneously abstracts the proton yielding the final product of the reaction anti 2-[1-(N-phenylamino)-1-(4-hydroxy-3-methoxyphenyl)]methylcyclohexanone (MB-H). The syn pathway requires lower activation energy but the anti pathway yields a thermodynamically more stable product, which implies that the examined Mannich reaction is thermodynamically controlled.