Sequential reactions from catalytic hydroformylation toward the synthesis of amino compounds

Different families of new amino compounds were efficiently synthesized, through optimized sequential processes, involving rhodium catalyzed hydroformylation as the key step. The selection of appropriate hydroformylation catalytic systems and reaction conditions allowed obtaining aldehydes derived from several n-alkyl olefins, cholest-4-ene and 3-vinyl-1H-indole, which were subsequently transformed, in one-pot, in to α-amino acids via hydroformylation/Strecker reaction, and in to tertiary amines via hydroaminomethylation, with excellent yields.     

Copper-catalyzed regioselective allylic oxidation of olefins via C–H activation

A regioselective oxidation of allylic C–H bond to C–O bond catalyzed by copper (I) was developed with diacyl peroxides as oxidants. The oxidation of allylic C–H bond was accomplished with good yield and regioselectivity under mild reaction conditions. This method has a broad substrate scope including cyclic olefins, terminal and internal acyclic olefins and allyl benzene compounds. The reaction proceeds by a radical mechanism as suggested by spin trapping experiments.     

七元瓜环对2'-羟基查尔酮溶解性、稳定性及抗氧化活性的影响

利用~1H NMR、紫外吸收光谱和荧光光谱等方法考察了七元瓜环(Q[7])对2'-羟基查尔酮(CET)的包结作用.结果表明,Q[7]与CET形成了摩尔比为1∶1的包结配合物,紫外吸收光谱和荧光光谱测得的结合稳定常数分别为1.0248×10~6和1.253×10~6.相溶解度法研究结果表明,当Q[7]的浓度为1×10~(-3)mol/L时,可使CET在水中的溶解度增加52倍.紫外吸收光谱随时间变化的研究结果表明,Q[7]使CET的稳定性增加3.5倍.采用体外抗氧化活性测定(ABTS法)考察了Q[7]对CET抗氧化活性的影响,发现CET@Q[7]包结配合物以及游离CET均对ABTS自由基有较好的清除作用.IC50值分别为3.4×10~(-5)和2.4×10~(-5)mol/L,表明Q[7]不仅能增加CET的溶解性和稳定性,同时对CET抗氧化活性的影响不大.     

N_2-DART-Orbitrap中的特征气相离子反应及在西药快速检测中的应用

采用实时直接分析(DART)离子源串联高分辨质谱Orbitrap技术(DART-Orbitrap MS),对8种市售常见西药进行有效成分分析,建立了一种快速、简便、准确测定西药中有效成分的方法.对DART离子源的离子化温度、扫描模式、操作气体种类、辅助溶剂种类及其酸碱性等实验条件进行了优化,得到最佳实验条件.实验结果表明,正谱条件下,采用N_2气作为操作气体时,待测组分准分子离子峰[M+H]+同样具有较高的灵敏度和谱图辨识度.因此,N2气可以替代昂贵的He气作为DART离子源的操作气体用于8种药物有效成分的现场实时检测.该方法具备成本低、快速和操作简便的特点.通过分析待测组分的特征碎片离子,发现了N2-DART离子源中的特征离子反应,包括氧化反应和重排反应.根据获得的特征碎片离子对N_2-DART-MS中发生的反应机理进行推导,并结合理论计算对其进行验证.N_2-DART-MS技术有望应用于复杂基质混合物的现场快速检测中.     

改性黏土负载多乙烯多胺对H_2S的高效捕集

以工业建材级黏土矿石粉为原料,经酸处理或煅烧改性后,利用其多孔性负载多乙烯多胺制得吸附材料,并考察了其硫化氢脱除性能.实验结果表明,经400℃煅烧改性的材料的硫化氢脱除效果最佳.考察了负载方法、吸附温度、水蒸气预处理和负载量等因素对吸附的影响,发现在较低温度以及预加湿的情况下,硫化氢的脱除效果最显著,脱除率接近100%.负载量为33.3%的吸附剂的穿透硫容及饱和硫容均优于其它负载量的吸附剂.再生实验表明,吸附剂可以在较低温度下轻易再生,且多次再生后脱硫效果无显著下降.红外光谱和比表面积测试结果表明,该吸附剂对硫化氢的吸附以化学吸附为主.     

Enhanced electron transfer ability <Emphasis Type="Italic">via</Emphasis> coordination in block copolymer/porphyrin/fullerene micelle

Inspired by structures of antenna-reaction centers in photosynthesis, the complex micelle was prepared from zinc tetra-phenyl porphyrin (ZnTPP), fullerene derivative (PyC₆₀) and poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL). The core-shell structure made the hydrophobic donor-acceptor system work in aqueous. In micellar core, coordination interaction occurred between ZnTPP and PyC₆₀ molecules which ensured the enhanced energy migration from the donor to the acceptor. The enhanced interaction between porphyrin and fullerene was confirmed by absorption, steady-state fluorescence and transient fluorescence. The generation of singlet oxygen and superoxide radical was detected by iodide method and reduction of nitro blue tetrazolium, respectively, which confirmed that electron transfer reaction in the complex micellar core occurred. Moreover, the complex micelle exhibited effective electron transfer performance in photodebromination of 2,3-dibromo-3-phenylpropionic acid. The complex micellar structure endowed the donor-acceptor system with improved stability under irradiation. This strategy could be helpful for designing new electron transfer platform and artificial photosynthetic system.     

A universal blown film apparatus for <Emphasis Type="Italic">in situ</Emphasis> X-ray measurements

A setup of blown film machine combined with in situ synchrotron radiation X-ray diffraction measurements and infrared temperature testing is reported to study the structure evolution of polymers during film blowing. Two homemade auto-lifters are constructed and placed under the blown machine at each end of the beamline platform which move up and down with a speed of 0.05 mm/s bearing the 200 kg weight machine. Therefore, structure development and temperature changes as a function of position on the film bubble can be obtained. The blown film machine is customized to be conveniently installed with precise servo motors and can adjust the processing parameters in a wide range. Meanwhile, the air ring has been redesigned in order to track the structure information of the film bubble immediately after the melt being extruded out from the die exit. Polyethylene (PE) is selected as a model system to verify the feasibility of the apparatus and the in situ experimental techniques. Combining structure information provided by the WAXD and SAXS and the actual temperature obtained from the infrared probe, a full roadmap of structure development during film blowing is constructed and it is helpful to explore the molecular mechanism of structure evolution behind the film blowing processing, which is expected to lead to a better understanding of the physics in polymer processing.     

柔性扑翼的气动特性研究

以往扑翼的气动力计算研究都很少考虑扑翼的柔性,而在鸟的扑翼动作中,在外加气动力和鸟自身的扑动力作用下,扑翼的柔性变形相当大。本文在原有匀速刚性模型的基础上,提出考虑了扑翼扑动速率变化和形状变化的扑翼分析模型,使之更接近鸟翼柔性扑动真实情况。通过计算分析气动特性发现,控制适当的话,柔性变形能大大改善扑翼的气动性能。本文通过模拟鸟扑翼的柔性运动,计算了时柔性扑翼气动力以及平均升力系数和平均推力系数随着扑动角、倾斜角等参数变化的情况,从而从气动的角度解释了为什么鸟在不同的飞行阶段扑翼规律各不相同,并为柔性扑翼飞行器的设计提供了理论依据。     

SOME DYNAMICAL PROPERTIES OF THE UNIVERSAL UNFOLDING OF PITCHFORK

From the point of view of dynamics,the phenomenon of mode jumpingin the imperfect pitchfork problem is discussed.The dynamical mechanism of modeljumping of structures,such as plate and shell,that is brought about by the extremurninstability,is explained.Finally,we give numerical simulation to show the validity ofour results.     

双柱单锥型液-液旋流管内流场的激光诊断

应用激光测速仪，对一种双柱单锥型液 液旋流管内的流动结构，进行了全场范围内的多工况流动诊断研究．揭示出其切向速度由内旋流区和外旋流区构成，其中内旋流区中的速度分布符合准强制涡关系，外旋流区中的速度分布符合准自由涡关系；轴向速度由上行流动区和下行流动区构成，两者之间在直管段以零速点作分界，在锥体段则以零速区作过渡并伴随有一定的回流出现，且该过渡区或回流区的大小随锥体截面的收缩而减小，直到进入直管段后消失；各湍流量的分布以管芯处最大向外逐渐减小，沿轴向是直管段中的湍流度大于锥体段中的湍流度，而且湍流度在旋流管内具有各向异性的特性．