Application of novel SIMS technique for imaging the active sites of oxygen reduction at the SOFC cathode/electrolyte interfaces

The oxygen reduction active sites were visualized around the O₂/SOFC cathode/electrolyte triple phase boundaries (TPB) by the¹⁶O/¹⁸O exchange techniques and secondary ion mass spectrometry (SIMS) analysis. The higher¹⁸O concentration is observed on the cathode top surfaces (La_0.9Sr_0.1MnO₃-mesh, Au-mesh, and Ag-porous), which suggested the promotion of oxygen adsorption and oxygen surface exchange at the cathode. The oxygen diffusion through the bulk of cathode occurred at the La_0.9Sr_0.1MnO₃-mesh and the Ag-porous cathodes, not at the Au-mesh cathode. On the YSZ surfaces after removing the cathode, the active sites for oxygen incorporation were analyzed by SIMS. The active sites for oxygen incorporation were at the La_0.9Sr_0.1MnO₃/YSZ interface as well as the TPB. On the other hand, the active sites for oxygen incorporation are limited to the TPB in the case of the Au-mesh removed YSZ surface. From the SIMS analysis, the expansion of the active sites for oxygen incorporation is less than a few μm from the TPB lines. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

过量Zn对β-Zn4Sb3热电性能影响的研究

采用真空熔融缓冷方法制备了单相β-Zn4Sb3以及含有过量Zn的β-Zn4Sb3块体热电材料.在300—700K的温度范围内测试了材料的电导率、Seebeck系数和热导率,研究了β-Zn4Sb3化合物中过量Zn的分布状态及其对材料热电性能的影响规律.结果表明：过量的Zn作为第二相较均匀的分布在β-Zn4Sb3的晶界上,随着Zn含量增加,材料电导率和热导率上升,Seebeck系数下降,Zn第二相的引入能有效提高材料的功率因子,Zn过量2at%的材料在700K时其ZT值达到1.10.     

Entanglement of Momentum for a Single Photon with a Single Atom

In this talk, the interaction of a single photon injected to a single atom is studied, for which initially the photon is uncorrelated with the atom. The spontaneous emitted photon will then evolve to be entangled with the atom on their continuous kinetic variables （momentum） in the process of resonant scattering. We find the relations between the entanglement and their physical control parameters （such as the linewidth of the injected photon wave packet, and that of the atomic wave packet, etc. ）, which indicates that high entanglement can be reached by broadening the scale of the atomic wave or squeezing the linewidth of the incident single-photon pulse.     

基于FPGA+DSP系统的红外图像非均匀校正的实现

首先引述了红外探测器两点法进行图像非均匀校正的原理,给出了基于DSP+FPGA的图像处理系统硬件模块整体实现框图,以及其非均匀校正模块的硬件结构。然后对其非均匀校正模块硬件实现中的芯片选择,工作流程以及实现作了详细的阐述。最后给出了非均匀校正试验的结果。     

椭圆型问题一类广义差分法的L~2模误差估计

1.引 言 广义差分法作为处理偏微分方程的离散技术,能够保持质量,动量,能量等物理量的守恒.广义差分法（有些文献称为box method[3];finite volume element method[4],[5],[6]）利用在对偶剖分体积单元积分原始方程,并将近似解限制于某一有限元空间而得到离散方程.因此,它在局部区域保持了原始方程的物理守恒性和其他重要特性.从而被广泛地应用于数值求解数学物理方程,特别是计算流体力学和热传导问题[11]. 对广义差分法的研究已有许多文献,专著[10]有详细的介绍.早期的工作主要考虑标准的重心对偶剖分.近年来Cai et,al[4],[5],[6],在某些假定下对较一般的对偶剖分给出了能量模误差估计,Huang and Xi[9]去掉了文献[6]中的这些限制.Chou,Li[8]和Li,     

超稳定TO-8型压力传感器在气体导热系数测定实验中的应用

介绍了TO-8型压力传感器的性能及电源电路.以气体导热系数测定实验为例,用TO-8型压力传感器制成的测压装置代替旋转式麦氏真空计,利用可调针孔式放气阀对真空气压进行连续调节,实现了对测试系统真空度的实时监测.     

VO2-Based Infrared Microbolometer Array

V0₂-based thin film materials on silicon substrates are fabricated by ion beam sputtering and a post-annealing which is different from the conventional fabricating method. An infrared linear microbolometer array with 128 pixels is prepared using as-deposited vanadium dioxide thin films. Optical and electrical properties for V0₂-based microbolometer array are tested.     

混杂配体金属簇合物的分子振动光谱与结构

由于原子簇化合物在催化，生物活性，功能材料等方面所呈现的重要性，使其成为无机和物理化学最重要的研究领域之一。文章中和谱学方法对一些具有混配体的过渡金属簇合物的结构及其两者之间的关系进行.     

聚氧化乙烯介质中的掺杂硫化锌纳米晶的制备及光学性质

简述了聚氧化乙烯介质中的铽、铕、铥、钆、钇、镓、锰掺杂的硫化锌纳米晶的制备方法以及紫外吸收光谱、激发光谱和光激发发射光谱.制成的硫化锌纳米晶直径为3.0～3.5nm.