Rh(Ⅰ),Co(Ⅰ)和Ru(Ⅱ)双齿磷氢化物的合成.结构表征和催化加氢活性

膦配位的过渡金属氢化物被看作是烯烃及其他一些不饱含有机化合物催化加氢反应及氢甲酰化反应的催化活性物种,关于它们的结构与催化活性关系的研究,有着重要的理论意义和实际意义,通常单齿膦配位表现出较高的催化活性,而不同的金属中心在催化活性和选择性上也表现出明显的差别,反映了催化功能与催化活性物种的电子结构和空间结构之间存在着依存关系.膦配体过渡金属氢化物,通常是以它们的相应卤化物经氢化锂铝或硼氢化钠或肼还原得     

大鼠肾组织的超低温快速冷冻固定和冷冻置换研究

超低温快速冷冻固定以极高的冷冻速率（１００００Ｋ／ｓ）对生物组织进行物理固定，可使生物组织结构、组织内可溶性离子及游离性物质得到保存，使被固定后的生物组织保持最接近于原自然状态，这种样品制备方法大大优于化学制备法，因而在Ｘ－射线微分析及免疫细胞化学中得到广泛应用。生物样品超低温快速冷冻后，利用冷冻置换法，在低温下将生物组织内的结晶水缓慢置换出来，而后常规包埋切片，可获得理想的组织结构及组织内待分析成分。本文应用超低温快速冷冻固定技术及冷冻置换法对大鼠肾皮质部的快速冷冻固定及损伤进行探讨。     

Current Trend in Synthesis,Post‐Synthetic Modifications and Biological Applications of Nanometal‐Organic Frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs.     

二水·2-羰基丙酸水杨酰腙合铜(Ⅱ)配合物的晶体结构及生物活性

在水中,以2-羰基丙酸水杨酰腙与硫酸铜反应,制得新配合物Cu(C₁₀H₈N₂O₄)(H₂O)₂(C₁₀H₈N₂O₄^2-为2-羰基丙酸水杨酰腙负离子),并以水为溶剂培养了单晶,测试了晶体结构,该单晶为深绿色,属单斜晶系,空间群为C2/c,晶胞参数a=1.1297(1)nm,b=0.9824(8)nm,c=2.1973(3)nm,β=91.91(8)°,V=2.43749(8)nm³,Z=8,μ=1.817mm^-1,D_c=1.743Mg·m^-3,F(000)=1304,R=0.0264,wR=0.0654,GOF=1.052。其测试结果表明在配合物中Cu²⁺处于五配位的四方锥配位环境,配位原子分别来自1个三齿配体2-羰基丙酸水杨酰腙负二价离子的2个O原子和1个N原子,2个水分子中的O原子,其中1个水分子的O原子处于四方锥的锥顶,锥底的配位原子基本处于同一平面上。对该配合物所作的皿内抑菌试验和盆栽活体实验表明,配合物对小麦条锈病、白菜黑斑病及辣椒疫霉菌等分别有96%、89%、100%的抑制率,且有一定的助长作用。     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。     

滂胺天蓝-氨基糖苷类抗生素的显色反应及其分析应用

在 pH2.0～7.0的条件下 ,滂胺天蓝(PSB)与硫酸卡那霉素(KANA)、硫酸庆大霉素(GEN)和硫酸新霉素(NEO)等氨基糖苷类抗生素反应生成蓝色离子缔合物 ,最大显色波长位于686～690nm ,线性范围分别为0～14.0、0～12.5、0～14.0mg/L ,摩尔吸光系数(ε)分别为1.53×104、1.12×104、1.47×104L/(mol·cm) ;最大褪色波长位于620～622nm ,线性范围分别为0～14.0、0～12.0、0～14.0mg/L ,摩尔吸光系数(ε)分别为1.41×104、1.43×104、2.42×104L/(mol·cm) ;当用双波长叠加法测定时 ,ε值分别为2.94×104、2.55×104、3.89×104L/(mol·cm) ;探讨了适宜的反应条件 ;该法用于市售药物中氨基糖苷类抗生素含量的测定 ,结果令人满意     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

维多利亚蓝B双波长叠加吸光光度法测定微量亚硝酸根

在稀盐酸介质中 ,维多利亚蓝B(VBB)的最大吸收峰位于 6 13nm ,当与NO- 2 反应后发生颜色变化 ,最大吸收峰红移 ,以试剂空白为参比 ,可观察到在 6 39nm处出现一新的最大吸收峰 ,同时在 5 6 0nm处发生褪色反应 ,最大褪色波长和最大吸收波长处吸光度均与溶液中NO- 2 的浓度成正比 ,其线性范围在 0～ 2 0 μg/ 2 5mlNO- 2 ,摩尔吸光系数分别为ε56 0 =2 .96× 10 4 L·mol- 1·cm- 1,ε6 39=3.2 3× 10 4 L·mol- 1·cm- 1,用双波长叠加法ε56 0 +6 39=6 .19× 10 4 L·mol- 1·cm- 1,相关系数为 0 .9999。由于显色反应在较强的酸性介质中进行 ,方法具有良好的选择性 ,用于环境水中微量NO- 2 的测定 ,结果满意。