Correlations of conserved charges and QCD phase structure

Correlations of conserved charges,i.e.,the baryon number,electric charge,and strangeness,are calculated at finite temperature and chemical potentials up to the fourth order.The calculations are done ina 2+1 flavor low energy effective theory,in which the quantum and thermal fluctuations are encoded through the evolution of flow equations within the functional renormalization group approach.Strangeness neutrality and a fixed ratio of the electric charge to the baryon number density are implemented throughout the computation.We find that higher-order correlations incorporate more sensitive critical dynamics than the quadratic ones.In addition,a non-monotonic dependence of the fourth-order correlations between the baryon number and strangeness,i.e.,-χ₃₁^BS/χ₂^Sand χ₂₂^BS/χ₂^S,on the collision energy is also observed.     

13CH4分子v3振动带空气和氮气加宽系数温度依赖性研究

采用中红外波段连续可调谐二极管激光器和自行研制的低温吸收池, 测量了温度为296 K, 252 K, 213 K, 173 K时, 3.38 μm附近¹³CH₄分子的四条跃迁谱线的氮气和空气加宽光谱; 首次通过实验获得空气和氮气对¹³CH₄分子的碰撞加宽系数, 以及谱线加宽系数的温度依赖系数. 实验过程中, 利用Voigt线型对所测量的光谱进行拟合. 实验结果表明, 氮气和空气对¹³CH₄分子的碰撞诱导加宽系数随温度的降低而增大; 相同温度下, 氮气对¹³CH₄分子的碰撞加宽系数普遍大于空气加宽系数. 实验数据为地球和外星体大气遥感探测提供了依据.     

颗粒滚动摩擦系数对堆积特性的影响

为探讨颗粒摩擦系数对堆积特性的影响,利用离散单元法,模拟静摩擦系数固定时,变化滚动摩擦系数对椭球形颗粒堆积角及堆积体的影响.利用自制斜面仪测定了颗粒静摩擦系数,并对滚动摩擦系数与堆积角建立线性方程.结果表明,滚动摩擦系数对颗粒堆积特性有显著影响,颗粒堆积角随滚动摩擦系数增大而增大,边界圆与连续圆间的间隙随滚动摩擦系数增大而减小.依据颗粒堆积过程中旋转动能的变化可以阐述上述结果,建立的滚动摩擦系数与堆积角的线性方程可为具体颗粒物料滚动摩擦系数的获取提供数值测量思路.模拟堆积的过程可为散体物料一些不易测量的参数进行虚拟实验标定.     

近玻尔速度Ne2+离子穿过碳膜引起的电子发射

本文测量了入射能为2–25 keV/u的Ne²⁺离子穿过不同厚度碳膜诱导的前向、后向 (分别对应出射表面和入射表面) 电子发射产额. 实验中通过改变炮弹离子的能量, 系统的研究了势能沉积、电子能损以及反冲原子对前向、后向电子发射产额的贡献. 结果表明, 离子的势能沉积只对后向电子发射有贡献, 前向、后向电子发射产额分别与Ne²⁺离子在薄膜出射、入射表面的电子能损近似成正比关系, 其中电子能损很低 (对应于离子能量很低) 的时候, 反冲原子对电子发射的贡献不能忽略. 关键词： 近玻尔速度 电子发射 电子能损 反冲原子     

Investigation on improving characteristics of two-cell SBS system with CCl4/C2H5OH liquid mixture

In order to improve the performance of the two-cell stimulated Brillouin scattering （SBS） system, this paper proposes the methods of using mixtures, which require amplifier media to have small absorption rate, and generator media to have high optical breakdown threshold and Brillouin frequency shift equal to that of the amplification media. The characteristics of the two-cell SBS system are studied experimentally by using CCl4 as amplifier medium and CCl4, C2H5OH and CCl4/C2H5OH liquid mixture as generator medium pumped by Nd：YAG Q-switched laser. The obtained results show that liquid mixture in generator cell improves the power load ability, phase conjugation fidelity, energy reflectivity （ER） and ER stability.     

复宗量Laguerre-Gauss光束在强非局域非线性介质中的传输

研究得到了偏离束腰入射的复宗量Laguerre-Gauss光束在强非局域非线性介质中传输的解析表达式,并且得到了其二阶矩束宽的解析解.通过例子研究了偏离束腰入射的复宗量Laguerre-Gauss光束在强非局域非线性介质中传输性质.结果表明：非(0, m)模的复宗量Laguerre-Gauss光束的光束形状随着传输而发生改变,并以Δz=πz_c为周期做周期性演化.而(0,m)模复宗量Laguerre-Gauss光束在演化过程中则形状保持不变,仅改变光束宽度;不论功率多大,在偏离束腰入射条件下总是表现为呼吸子;只有当其为束腰入射,并且入射功率等于临界功率时才能形成孤子.     

Highly efficient toughening effect of ultrafine full-vulcanized powdered rubber on poly(lactic acid)(PLA)

A unique ultrafine full-vulcanized powdered ethyl acrylate rubber (EA-UFPR) was used as the toughening modifier for poly (lactic acid) (PLA). Largely improved tensile toughness was successfully achieved with the incorporation of only 1 wt% EA-UFPR, while the tensile strength and modulus of the blends were almost the same as pure PLA. The highly efficient toughening of PLA by UFPR is mainly ascribed to the strong interfacial interaction between PLA and UFPR and good dispersion of UFPR particles in PLA matrix. Our work provides an effective toughening method to largely improve the mechanical properties of PLA without sacrificing its stiffness, which is very important for the wide application of PLA materials.     

Hierarchical nanostructured composite cathode with carbon nanotubes as conductive scaffold for lithium-sulfur batteries

Carbon nanotubes (CNTs) are excellent scaffolds for advanced electrode materials, resulting from their intrinsic sp2 carbon hybridization, interconnected electron pathway, large aspect ratio, hierarchical porous structures, and low cost at a large-scale production. How to make full utilization of the mass produced CNTs as building blocks for nanocomposite electrodes is not well understood yet. Herein, a composite cathode containing commercial agglomerated multi-walled CNTs and S for Li-S battery was fabricated by a facile melt-diffusion strategy. The hierarchical CNT@S coaxial nanocables exhibited a discharging capacity of 1020 and 740 mAh g-1 at 0.5 and 2.0 C, respectively. A rapid capacity decay of 0.7% per cycle at the initial 10 cycles and a slow decay rate of 0.14% per cycle for the later 140 cycles were detected. Such hierarchical agglomerated CNT@S cathodes show advantages in easy fabrication, environmentally benign, low cost, excellent scalability, and good Li ion storage performance, which are extraordinary composites for high performance Li-S battery.     

Poly(lactic acid) composites with poly(lactic acid)‐modified carbon nanotubes

This work reports the study of the effect of chemical functionalization of carbon nanotubes on their dispersion in poly(lactic acid). The nanotubes were functionalized by the 1,3‐dipolar cycloaddition reaction, generating pyrrolidine groups at the nanotube surface. Further reaction of the pyrrolidine groups with poly(lactic acid) was studied in solution and in the polymer melt. The former involved refluxing the nanotubes in a dimethylformamide/polymer solution; the latter was carried out by direct melt mixing in a microcompounder. The carbon nanotubes collected after each process were characterized by thermogravimetry and by X‐ray photoelectron spectroscopy, showing evidence of polymer bonded to the nanotube surface only when the reaction was carried out in the polymer melt. The composites with polymer modified nanotubes present smaller average agglomerate area and a narrower agglomerate area distribution. In addition, they show improved tensile properties at low CNT concentration and present lower electrical resistivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3740–3750     

测量噪声对波前重构精度的影响

 Hartmann-Shack波前传感器斜率测量误差是自适应光学系统中影响波前重构精度的一个主要误差来源。针对模式法波前重构算法,推导出了普遍适用的模式法波前重构误差传递系数计算公式;利用61单元自适应光学系统中的Hartmann-Shack波前传感器测量的斜率数据,验证了模式法波前重构误差传递系数计算公式的正确性。