相变及空位缺陷对高压下GeO_2光学性质的影响

本文采用第一性原理方法,在100 GPa的压力范围内,计算了GeO_2理想晶体和含锗、氧空位点缺陷晶体的光学性质.吸收谱数据表明,压力诱导的三个结构相变对GeO_2晶体的吸收谱均有影响:第一个相变将导致其吸收边蓝移,而第二和第三相变将使得其吸收边红移.锗和氧空位点缺陷的存在将导致GeO_2的吸收边红移,但氧空位点缺陷引起的红移更明显.尽管如此,分析发现,在100 GPa的压力范围内,压力、相变以及空位点缺陷等因素都不会导致GeO_2晶体在可见光区出现光吸收现象(是透明的).波长在532 nm处的折射率数据显示,在GeO_2的四个相区,其折射率均随压力增加而降低;而且,GeO_2的三个结构相变以及锗、氧空位点缺陷都会导致其折射率有所增大.本文预测,GeO_2有成为冲击光学窗口材料的可能.     

团簇Aun+1-1、AunCr-1 (n=1-10)吸附CO的密度泛函理论研究

采用密度泛函理论对CO在阴离子团簇Aun+1-1、AunCr-1(n=1-10))表面的吸附做了系统研究.结果表明,团簇Aun+1CO-1、AunCrCO-1的基态结构是在团簇Aun+1-1、AunCr-1最低能量结构的基础上吸附CO形成; 吸附后的CO键长变长,振动频率减小,表明CO分子被活化;取值相同时,AunCrCO-1的平均结合能高,表明团簇Aun+1CO-1掺杂Cr后稳定性升高.HOMO-LOMO能隙结果表明Aun+1CO-1替代掺杂Cr原子后团簇的化学活性得到了提升,AunCrCO-1、Aun+1CO-1团簇能隙具有奇偶振荡的现象;轨道电荷分析表明CO与团簇相互作用实质是C原子与成键Au原子或Cr原子间转移电荷,CO在与团簇相互作用过程中O原子轨道电荷分布几乎没有发生变化.     

GI／G／1单重休假随机服务系统的马氏骨架方法

文献[1]引入一类具有广泛应用前景的随机过程-Markov骨架过程。借助Markov骨架过程的方法研究GI/G/1单重休假服务系统队长，及t时刻到达顾客等待时间的瞬时概率分布。     

The Selmer Groups of Elliptic Curves

Let E/K be an elliptic curve with K-rational p-torsion points.The p-Selmer group of E is described by the image of a map λk and hence an upper bound of its order is given in terms of the class numbers of the S-ideal class group of K and the p-division field of E.     

带非局部源的退化半线性抛物型方程解的爆破

该文研究带Dirichlet边界条件的退化半线性抛物型方程:xqut-uxx=∫0af(u)dx,这里q>0.作者证明了局部解的存在唯一性并且得到当初值充分大时解在有限时刻爆破.进而,证明解的爆破点集是整个区间[0,a],这与具有局部源的方程解的性质不同.     

K9和石英玻璃基片上Au膜真空紫外反射特性研究

采用离子束溅射法,分别在经过不同前期清洗方法处理过的K9及石英玻璃光学基片上,选择不同的镀膜参量,镀制了多种厚度的Au膜。对镀制的Au膜在真空紫外波段较宽波长范围内的反射率进行了连续测量。测试结果表明:辅助离子源的使用方式、Au膜厚度对反射镜的反射率有重大影响。基片材料、镀前基片表面清洗工艺等对反射率也有一定影响。采用镀前离子轰击,可显著提高Au膜反射率及膜与基底的粘合力;获得最高反射率时的最佳膜厚与基片材料、镀膜工艺密切相关。对经过离子清洗的石英基片,膜厚在30 nm左右反射率最高;比较而言,石英基片可获得更高的反射率;辅助离子源的使用还显著影响获得最高反射率时对应的最佳膜厚值,且对K9基片的影响更显著。     

Polarisation characteristics of a 12 fibre coupler under femtosecond pulsed and continuous wave illumination

We report on the experimental investigation carried out in the polarisation characteristics of femtosecond pulsed and continuous wave beams propagating through a 1×2 fibre coupler. It is demonstrated that the polarisation states of pulsed and continuous wave illumination over the broad wavelength range can be preserved in a conventional fused fibre coupler. Furthermore, the fibre coupler acts as a low-pass spectral filter in the visible wavelength range with a splitting ratio between 99.6/0.4 and 99.7/0.3. The result is of importance for fibre-optic second harmonic generation microscopy which requires the polarisation preservation to extract molecular organization of a sample.     

Combustion and microexplosion of collision-merged methanol/alkane droplets

The combustion characteristics of freely falling droplets, individually generated by the merging of colliding methanol and alkane droplets, were investigated and compared with those for pure methanol and alkanes. The merging of the nominally immiscible methanol and alkanes was manifested in an apparently adhesive, but unmixed, manner in all test conditions. An air bubble was found to be trapped at the colliding interfaces where they were “adhered,” with the trapping favored for head-on or near head-on collision orientations. The trapped air bubble ostensibly induced heterogeneous nucleation of the methanol, being facilitated by the relatively low limit of superheat of methanol. Consequently, the droplet exploded almost immediately upon ignition, leading to an extremely short overall lifetime. For collision orientations that were more off-centered, bubble trapping and thereby heterogeneous nucleation were not favored. However, delayed, albeit strong, microexplosion occurred through homogeneous nucleation of methanol at the contacting interface. The global burning rate was therefore again augmented. In general, microexplosion was facilitated for high-boiling-point alkanes such as hexadecane and tetradecane. The co-vaporization of methanol and alkane from their respective hemispherical segments constituting the adhered droplet also led to flame colors that were more bluish than yellowish, indicating the reduction of soot from alkane burning in the presence of methanol vapor. In light of the difficulty of forming stable methanol/oil emulsions, the potential of separate injection of oil and methanol in opposed jet arrangement, in direct-injection engines to facilitate collision, is suggested.