Selective etching of ZnTe in HF:H2O2:H2O solution: Interpretation of extended defect‐related etch figures

HF:H₂O₂:H₂O solution (40%wt.HF: 30wt.%H₂O₂: H₂O, 3:2:1 by volume) was used to reveal extended defects (line, face and volume defects) in bulk ZnTe crystals grown from Te solution. The etch patterns were analyzed based on their size, shape and distribution. The etch figures, both in the shape of pits and hillocks with high resolution, show forms controlled by the symmetries of the respective faces were produced. Two different sizes of pits were observed, the larger‐size pits correspond to dislocations penetrating the surface, however, the smaller‐size texture pits are produced on the defect‐free region, which serve as standard pits on respect faces. The face defects, such as grain boundaries, sub‐grain boundaries, dislocation walls, twins and stacking faults, can be all displayed clearly. Another essential feature of the etchant is that, it can effectively dissolve Te‐rich phase (Te inclusion/precipitates), which makes it promising to reveal the shape of this volume defect.     

纳米Fe3O4/高岭土复合粉体制备及其对亚甲基蓝吸附性能研究

以天然高岭土为载体、利用化学共沉淀法成功地制备出纳米Fe3O4/高岭土复合粉体。采用XRD、FSEM对复合粉体的物相组成、粒径、显微结构、形貌进行了表征,并研究了其磁分离性能和对亚甲基蓝(MB)的吸附性能。结果显示,复合粉体中的铁氧化物呈单一的Fe3O4相,Fe3O4晶粒的尺寸为10~30 nm,且均匀负载于高岭石晶体表面。当Fe3O4、高岭土质量比为1∶5时,复合粉体的磁分离率高达90.12%,并具有良好的吸附性能。复合粉体对MB的去除率随着吸附时间的延长、吸附温度的升高、溶液p H的增大和投入量的增加而逐步提高,随着MB溶液初始浓度的增大而逐步减小;对MB的吸附量随初始浓度的增大而逐步增大。     

聚L-谷氨酸苄酯固定相的制备及色谱评价

利用L-谷氨酸苄酯开环聚合得到聚L-谷氨酸苄酯,对其进行表征,将聚L-谷氨酸苄酯溶于四氢呋喃后涂敷在3-氨丙基三乙氧基硅胶上制得液相色谱固定相,研究了正相色谱条件下聚L-谷氨酸苄酯涂敷型固定相对9种位置异构体及10种手性化合物的拆分能力。以不同比例的正己烷/异丙醇为流动相,有6种位置异构体(o,m,p-氯苯胺、o,m,p-溴苯胺、o,m,p-碘苯胺、o,m,p-硝基苯胺、o,m,p-二硝基苯和o,m,p-苯二胺)和4种手性化合物(1-(对氯苯基)乙醇、5-二硝基-N-(1-苯乙基)苯甲酰胺、华法林和四咪唑)得到不同程度的拆分,表明聚L-谷氨酸苄酯涂敷型固定相对位置异构体具有较好的识别作用,同时也表现出良好的手性拆分能力。     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

Unraveling the reactivity of a cationic iminoborane: avenues to unusual boron cations

A cationic terminal iminoborane [Mes*N B ← IPr₂Me₂][AlBr₄] (3⁺[AlBr₄]⁻) (Mes* = 2,4,6-tri-tert-butylphenyl and IPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) has been synthesized and characterized. The employment of an aryl group and N-heterocyclic carbene (NHC) ligand enables 3⁺[AlBr₄]⁻ to exhibit both B-centered Lewis acidity and BN multiple bond reactivities, thus allowing for the construction of tri-coordinate boron cations 5⁺–12⁺. More importantly, initial reactions involving coordination, addition, and [2 + 3] cycloadditions have been observed for the cationic iminoborane, demonstrating the potential to build numerous organoboron species via several synthetic routes.

An NHC-stabilized aryliminoboryl cation exhibits both boron-centered Lewis acidity and multiple bond reactivity and could be utilized as an effective synthon for unusual cationic boron species.     

光催化材料反应系数测量新方法

本文提出光催化材料反应系数测量新方法-Mass transfer based(MTB)方法,该方法不同于传统方法中忽略传质影响,而是通过CFD计算考虑传质影响,这种改进无需传统方法所需反应控制过程也可准确测量光催化材料反应系数。利用该方法测量了光催化材料降解甲醛的反应系数,实验验证了其可行性。     

Effects of sediment acoustic characteristics on low-frequency acoustic field distribution in shallow water

Most of the published literatures on low-frequency underwater sound propagation are focused on the sound propagation features in the water column,while studies on sound propagation features in the sediment layer or the semi-infinite basement are rare.In this paper,based on the wave equation,a computational model for sound energy flux in the sediment layer and the basement as well as in the water column is proposed under a cylindrical coordinate system.On this basis,the effects of various sediment acoustic parameters on the sound energy distribution and the corresponding mechanisms are elaborated through numerical examples and acoustic theory.Simulation results reveal that,in a situation where sediment P-wave speed>water sound speed> sediment S-wave speed,the greater the values of density and P-wave speed in sediment,the more likely it is that the sound energy remains in the water column without leaking to the sea floor.Conversely,the influence of the variation of S-wave speed is reversed.Basement influence on the sound propagation in the fluid layer is approximately negligible if the sediment layer is sufficiently thick.     

Synthesis of macrocyclic polystyrene-polydimethylsiloxane block copolymers

A series of macrocyclic polystyrene (PS)-polydimethylsiloxane (PDMS) block copolymers and similar block copolymers was synthesized by sequential polymerization of styrene and hexamethyl cyclotrisiloxane (D₃) initiated by a difunctional anionic initiator in THF at −78° followed by coupling with Cl₂SiMe₂ in very dilute (10⁻⁵ – 10⁻⁶ M) solutions. Total molecular weights ranged from about 2–85 × 10³. The formation of monodisperse macrocyclic block copolymers was indicated by the lower (15–30%) hydrodynamic volume of the rings compared to that of the linear block copolymers. Carbon-13 and ²⁹Si NMR likewise supported the absence of linear polymer in the macrocyclic block copolymer. The behavior of second virial coefficient A₂ of the rings and the linears versus temperature was examined by static light scattering in cyclohexane. Below 20° the A₂ for the linear polymer goes negative while that for the cycle remains positive. Dynamic light scattering (DLS) as a function of temperature also reflects that the cyclic polymers remain well solvated even down to 12°C. The DLS autocorrelation functions for the linear triblock however demonstrate the onset of aggregation and phase separation as the temperature is reduced below 20°C.     

基于红外/毫米波双模融合的目标识别方法

在数据融合的基础上,以红外/毫米波双模传感器的智能融合结构为模型,将模糊神经网络与D-S证据理论相结合,提出了一种新的目标识别方法.该算法根据红外/毫米波传感器的性能及工作范围,构造模糊变量作为神经网络的输入,根据神经网络的不同输出判别目标的真伪,并利用D-S证据理论进行目标身份识别.仿真结果证明了该算法的可行性.