Absence of morphotropic phase boundary effects in BiFeO<Subscript>3</Subscript>–PbTiO<Subscript>3</Subscript> thin films grown via a chemical multilayer deposition method

We report an unusual behavior observed in (BiFeO₃)_1−x –(PbTiO₃) _x (BF–xPT) thin films prepared using a multilayer chemical solution deposition method. Films of different compositions were grown by depositing several bilayers of BF and PT precursors of varying BF and PT layer thicknesses followed by heat treatment in air. X-ray diffraction showed that samples of all compositions show mixing of two compounds resulting in a single-phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk compositions, samples show a monoclinic (M_A-type) structure suggesting disappearance of the morphotropic phase boundary (MPB) at x=0.30 as observed in the bulk. This is accompanied by the lack of any enhancement of the remanent polarization at the MPB, as shown by the ferroelectric measurements. Magnetic measurements showed an increase in the magnetization of the samples with increasing BF content. Significant magnetization in the samples indicates melting of spin spirals in the BF–xPT films, arising from a random distribution of iron atoms. Absence of Fe²⁺ ions was corroborated by X-ray photoelectron spectroscopy measurements. The results illustrate that thin film processing methodology significantly changes the structural evolution, in contrast to predictions from the equilibrium phase diagram, besides modifying the functional characteristics of the BP-xPT system dramatically.     

Hydromagnetic laminar and turbulent free jet

The flow of a laminar and turbulent plane free jet of a viscous, incompressible, electrically conducting fluid in the presence of a transverse magnetic field is studied. Using the Prandtlvon Mises transformation, in both the cases, closed form solutions are obtained. A remarkable similarity with the nonmagnetic solutions is noticed. Critical values of the magnetic interaction parameter are determined when the dragging action of the initial momentum is exactly balanced by the retarding effect of the magnetic field resulting in the zero axial velocity field.On leave from V.V. (P.G.) College, Shamli-247776, INDIA.     

Effect of alkaline pretreatment on delignification of wheat straw

This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis.     

On the fly estimation of host–guest binding free energies using the movable type method: participation in the SAMPL5 blind challenge

We review our performance in the SAMPL5 challenge for predicting host–guest binding affinities using the movable type (MT) method. The challenge included three hosts, acyclic Cucurbit[2]uril and two octa-acids with and without methylation at the entrance to their binding cavities. Each host was associated with 6–10 guest molecules. The MT method extrapolates local energy landscapes around particular molecular states and estimates the free energy by Monte Carlo integration over these landscapes. Two blind submissions pairing MT with variants of the KECSA potential function yielded mean unsigned errors of 1.26 and 1.53 kcal/mol for the non-methylated octa-acid, 2.83 and 3.06 kcal/mol for the methylated octa-acid, and 2.77 and 3.36 kcal/mol for Cucurbit[2]uril host. While our results are in reasonable agreement with experiment, we focused on particular cases in which our estimates gave incorrect results, particularly with regard to association between the octa-acids and an adamantane derivative. Working on the hypothesis that differential solvation effects play a role in effecting computed binding affinities for the parent octa-acid and the methylated octa-acid and that the ligands bind inside the pockets (rather than on the surface) we devised a new solvent accessible surface area term to better quantify solvation energy contributions in MT based studies. To further explore this issue a, molecular dynamics potential of mean force (PMF) study indicates that, as found by our docking calculations, the stable binding mode for this ligand is inside (rather than surface bound) the octa-acid cavity whether the entrance is methylated or not. The PMF studies also obtained the correct order for the methylation-induced change in binding affinities and associated the difference, to a large extent to differential solvation effects. Overall, the SAMPL5 challenge yielded in improvements our solvation modeling and also demonstrated the need for thorough validation of input data integrity prior to any computational analysis.     

MHD laminar wall jet over a curved surface in a variable normal magnetic field

The effects of a magnetic field on jets of an electrically conducting fluid flowing over a curved surface, in the presence of a variable normal magnetic field, are studied. It is noted that the convex surface curvature h and the magnetic interaction parameter m, in small perturbation similarity solution have qualitatively similar effects. They increase the mass flux, decrease the momentum flux, decrease the wall shear and cause an adverse pressure gradient in the flow field.     

Kinetics of copper(II)‐catalyzed oxidation of S(IV) by atmospheric oxygen in ammonia buffered solutions

To understand the chemistry of Cu(II)–NH₃–S(IV)–O₂ system, the kinetics of the oxidation of sulfur(IV) catalyzed by amminecopper(II) complexes has been studied in the ammonia‐buffered solutions. Sulfur(IV) is oxidized to sulfate. The complexes, Cu(NH₃)²⁺, Cu(NH₃)₂²⁺, and Cu(NH₃)²⁺₃ appear to be equally reactive and Cu(NH₃)₄²⁺ appears to be unreactive. The kinetics obey the rate law: where α₁ and γ₁ are the rate constants for O₂‐dependent and O₂‐independent pathways, respectively, for Cu(NH₃)²⁺, Cu(NH₃)²⁺₂, and Cu(N H₃)₃²⁺ complexes, which appear to be equally reactive. The values of α₁ and γ₁ were found to be (1.32 ± 0.21) × 10⁶ L² mol^?2 s^?1 (1.74 ± 0.40) × 10⁹ L³ mol^?3 s^?1respectively at 30°C. The reaction rate is not influenced by the presence of ethanol—a free radical scavenger, so a nonradical mechanism has been proposed. The results of this study are useful in understanding the atmospheric chemistry of aqueous phase autoxidation of dissolved sulfur dioxide in copper(II)–ammonia–sulfur(IV)–oxygen system at high pH. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 379–392, 2011     

Gold nanoparticle-decorated keggin ions/TiO2 photococatalyst for improved solar light photocatalysis

We demonstrate a facile localized reduction approach to synthesizing a Au nanoparticle-decorated Keggin ion/TiO(2) photococatalyst for improved solar light photocatalysis application. This has been achieved by exploiting the ability of TiO(2)-bound Keggin ions to act as a UV-switchable, highly localized reducing agent. Notably, the approach proposed here does not lead to contamination of the resultant cocatalyst with free metal nanoparticles during aqueous solution-based synthesis. The study shows that for Keggin ions (phosphotungstic acid, PTA), being photoactive molecules, the presence of both Au nanoparticles and PTA on the TiO(2) surface in a cocatalytic system can have a dramatic effect on increasing the photocatalytic performance of the composite system, as opposed to a TiO(2) surface directly decorated with metal nanoparticles without a sandwiched PTA layer. The remarkable increase in the photocatalytic performance of these materials toward the degradation of a model organic Congo red dye correlates to an increase of 2.7-fold over that of anatase TiO(2) after adding Au to it and 4.3-fold after introducing PTA along with Au to it. The generalized localized reduction approach to preparing TiO(2)-PTA-Au cocatalysts reported here can be further extended to other similar systems, wherein a range of metal nanoparticles in the presence of different Keggin ions can be utilized. The composites reported here may have wide potential implications toward the degradation of organic species and solar cell applications.     

Diastereoselectivity control in formal nucleophilic substitution of bromocyclopropanes with oxygen- and sulfur-based nucleophiles

A diastereoconvergent formal nucleophilic substitution of bromocyclopropanes with oxygen- and sulfur-based nucleophiles is described. The reaction proceeds via in situ formation of a highly reactive cyclopropene intermediate and subsequent diastereoselective addition of a nucleophile across the strained C═C bond. Three alternative means of controlling the diastereoselectivity of addition have been demonstrated: (1) thermodynamically driven epimerization of enolizable carboxamides, (2) steric control by bulky substituents, and (3) directing effect of carboxamide or carboxylate functions.     

A 'microfluidic pinball' for on-chip generation of Layer-by-Layer polyelectrolyte microcapsules

Inspired by the game of "pinball" where rolling metal balls are guided by obstacles, here we describe a novel microfluidic technique which utilizes micropillars in a flow channel to continuously generate, encapsulate and guide Layer-by-Layer (LbL) polyelectrolyte microcapsules. Droplet-based microfluidic techniques were exploited to generate oil droplets which were smoothly guided along a row of micropillars to repeatedly travel through three parallel laminar streams consisting of two polymers and a washing solution. Devices were prototyped in PDMS and generated highly monodisperse and stable 45±2 μm sized polyelectrolyte microcapsules. A total of six layers of hydrogen bonded polyelectrolytes (3 bi-layers) were adsorbed on each droplet within <3 minutes and a fluorescent intensity measurement confirmed polymer film deposition. AFM analysis revealed the thickness of each polymer layer to be approx. 2.8 nm. Our design approach not only provides a faster and more efficient alternative to conventional LbL deposition techniques, but also achieves the highest number of polyelectrolyte multilayers (PEMs) reported thus far using microfluidics. Additionally, with our design, a larger number of PEMs can be deposited without adding any extra operational or interfacial complexities (e.g. syringe pumps) which are a necessity in most other designs. Based on the aforementioned advantages of our device, it may be developed into a great tool for drug encapsulation, or to create capsules for biosensing where deposition of thin nanofilms with controlled interfacial properties is highly required.