铁(III)卟啉催化β-胡萝卜素分解动力学研究

使用BeckmannDU-8B紫外可见分光光度计研究了以氯合四－间三甲苯基卟啉铁（Ⅲ）（FeTMPCl）为催化剂，间氯过氧化苯甲酸（mCPBA）为氧化剂，咪唑（I_m）、2－甲基咪唑（MeI_m）、2－乙基－4－甲基咪唑（EMI_m）为轴向配体，催化β-胡萝卜素（β－cte）氧化分解为维生素A的动力学规律，提出了反应机理，研究了温度、催化剂浓度、氧化剂浓度及轴向配体对反应速率的影响，应用Gauss－Newton－Marquardt方法求得各基元反应的有关动力学参数．     

端视ICP-AES法同时测定玩具涂料中可溶性铅、镉、汞、砷、铬、锑、硒和钡

采用端视电感耦合等离子体原子发射光谱(ICP-AES)法同时测定玩具涂料中可溶性铅、镉、汞、砷、铬、锑、硒和钡.对仪器的工作参数和被测元素的分析谱线进行了优化和选择.铅、镉、汞、砷、铬、锑、硒和钡的检出限分别为0.006、0.0009、0.012、0.023、0.000 8、0.013、0.030和0.0006 mg/L.定量下限分别为0.99、0.15、2.0、3.8、0.14、2.2、5.0和0.10 mg/kg.相对标准偏差为0.76%～2.72%(n=8),加标回收率为96.0%～104.0%.该法适用于玩具涂料中铅、镉、汞、砷、铬、锑、硒和钡的快速测定.     

Strategies for synthesis of adducts of omicron-quinone metabolites of carcinogenic polycyclic aromatic hydrocarbons with 2'-deoxyribonucleosides

Polycyclic aromatic hydrocarbons (PAHs) are major environmental carcinogens produced in the combustion of fossil fuels, tobacco, and other organic matter. Current evidence indicates that PAHs are transformed enzymatically to active metabolites that react with DNA to form adducts that result in mutations. Three activation pathways have been proposed: the diol epoxide path, the radical-cation path, and the quinone path. The latter involves aldo-keto reductase mediated oxidation of PAH dihydrodiol metabolites to catechols that enter into redox cycles with quinones. This results in generation of reactive oxygen species (ROS) that attack DNA, and the PAH quinones also react with DNA to form adducts. Several strategies for synthesis of the stable adducts formed by the o-quinone metabolites of carcinogenic PAHs with 2'-deoxyribonucleosides were investigated and compared. The PAH quinones studied were benz[a]anthracene-3,4-dione and its 7-methyl- and 7,12-dimethyl- derivatives. The parent PAHs represent a range of carcinogenicity from inactive to highly potent. Two synthetic methods were devised that differ in the catalyst employed, Pd(OAc)(2) or CuI. The Pd-mediated method involved coupling a protected amino-catechol PAH derivative with a halo-2'-deoxyribonucleoside. The copper-mediated method entailed reaction of a halo-PAH catechol derivative with a 2'-deoxyribonucleoside. Adducts of benz[a]anthracene-3,4-dione (and its 7-methyl- and 7,12-dimethyl- derivatives) with 2'-deoxyadenosine and 2'-deoxyguanosine were prepared by these methods. Availability of adducts of these types through synthesis makes possible for the first time biological studies to determine the role of these adducts in tumorigenesis. The copper-mediated method offers advantages of economy, adaptability to large-scale preparation, utility for synthesis of (13)C- or (15)N-labeled analogues, and nonformation of bis-adducts as secondary products.     

Synthesis and Crystal Structure of 1-[(1''-Phenyl-5''-methyl-4''-pyrazolcarbonyl)- 3-methylthio-5-amino-1H-yl-1,2,4-triazole

The crystal structure of 1-[(1'-phenyl-5'-methyl-4'-pyrazolcarbonyl)]-3-methyl thio-5-amino-1H-yl-1,2,4-triazole (C14H14N6OS, Mr = 314.37) has been determined by single-crystal X-ray diffraction analysis. The crystal belongs to triclinic, space group P with a = 8.026(3), b = 8.651(4), c = 11.369(5) (A), α = 89.917(7), β= 89.084(7), γ = 68.470(6)°, V = 734.2(5) (A)3, Z = 2, Dc = 1.422 g/cm3, ( = 0.232 mm-1, F(000) = 328, R = 0.0376 and wR = 0.0890 for 2950 unique reflections. The crystal structure shows the presence of a dimmer with intermolecular N(4)-H(4)…N(3A) hydrogen bonds.     

Cation-pi interactions with a model for the side chain of tryptophan: structures and absolute binding energies of alkali metal cation-indole complexes

Threshold collision-induced dissociation techniques are employed to determine bond dissociation energies (BDEs) of mono- and bis-complexes of alkali metal cations, Li+, Na+, K+, Rb+, and Cs+, with indole, C8H7N. The primary and lowest energy dissociation pathway in all cases is endothermic loss of an intact indole ligand. Sequential loss of a second indole ligand is observed at elevated energies for the bis-complexes. Density functional theory calculations at the B3LYP/6-31G level of theory are used to determine the structures, vibrational frequencies, and rotational constants of these complexes. Theoretical BDEs are determined from single point energy calculations at the MP2(full)/6-311+G(2d,2p) level using the B3LYP/6-31G* geometries. The agreement between theory and experiment is very good for all complexes except Li+ (C8H7N), where theory underestimates the strength of the binding. The trends in the BDEs of these alkali metal cation-indole complexes are compared with the analogous benzene and naphthalene complexes to examine the influence of the extended pi network and heteroatom on the strength of the cation-pi interaction. The Na+ and K+ binding affinities of benzene, phenol, and indole are also compared to those of the aromatic amino acids, phenylalanine, tyrosine, and tryptophan to elucidate the factors that contribute to the binding in complexes to the aromatic amino acids. The nature of the binding and trends in the BDEs of cation-pi complexes between alkali metal cations and benzene, phenol, and indole are examined to help understand nature's preference for engaging tryptophan over phenylalanine and tyrosine in cation-pi interactions in biological systems.     

Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

Development and validation of polymerized high internal phase emulsion monoliths coupled with HPLC and fluorescence detection for the determination of trace tetracycline antibiotics in environmental water samples

A polymerized high internal phase emulsion monolith was used as a novel sorbent for solid‐phase extraction coupled with high‐performance liquid chromatography and fluorescence detection for the determination of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline in environmental water samples. The polymerized high internal phase emulsion monolithic column was prepared by the in situ polymerization of the continuous phase of a high internal phase emulsion containing glycidyl methacrylate, styrene, and divinylbenzene in pipette tips, and then functionalized with iminodiacetic acid. The resulting monolith exhibited highly interconnected porosity and large surface areas, making it an excellent candidate as an solid‐phase extraction sorbent for the enrichment of trace tetracycline antibiotics. Several factors affecting the extraction performance of polymerized high internal phase emulsion monoliths, including the pH of sample solution, the eluting solvents, the sample loading flow rate and volume, were investigated, respectively. Under the optimized conditions, the mean recoveries of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline spiked in pond and farm wastewater samples ranged from 78.1 to 119.3% with relative standard deviation less than 15%. The detection limits (S/N = 3) of the proposed method were in the range of 51–137 pg/mL. This study demonstrated that the monolithic polymerized high internal phase emulsion would be promising solid‐phase extraction sorbents in the extraction and proconcentration of trace analytes from complex samples.     

Experimental Investigation on Binary Phase Diagram of the Thermotropic Phase Transitions Compounds (n‐CnH2n+1R3)2ZnCl4

The thermotropic phase transitions compounds (n‐C_nH_2n+1R₃)₂ZnCl₄ as well as a series of their binary mixtures were prepared by a solution reflux method from their ethanol solutions. The experimental subsolidus binary phase diagram of [n‐C₁₈H₃₇N(CH₃)₃]₂ZnCl₄‐[n‐(C₁₈H₃₇)₂N(CH₃)₂]₂ZnCl₄ is constructed over the entire composition range by differential scanning calorimetry(DSC) and X‐ray. Experi‐ mental results indicate one stable intermediate phase [n‐C₁₈H₃₇N(CH₃)₃] [n‐(C₁₈H₃₇)₂N(CH₃)₂]ZnCl₄ at W_C18C3Zn %=59.75 %, and two invariant three phase equilibria, which shows two eutectoid temperatures: Te₁ at 310±1 K for eutectoid point W_C18C3Zn %=36.24 %, Te₂ at 313±1 K for eutectoid point W_C18C3Zn %=80.17 %. These three noticeable solid‐solution ranges are α‐phase at the left, ?‐phase at the right, and ψ‐phase in the middle of the phase diagram. It is (n‐C_nH_2n+1R₃)₂ZnCl₄ systems as phase change materials that are characterized the phase transition temperatures T in the range of 310 to 340 K, the transition enthalpies ΔH in the range of 38.40 and 168.72 J/g between two polymorphic forms.     

Isolable chiral aggregates of achiral π-conjugated carboxylic acids

The induced aggregation of achiral building blocks by a chiral species to form chiral aggregates with memorized chirality has been observed for a number of systems. However, chiral memory in isolated aggregates of achiral building blocks remains rare. One possible reason for this discrepancy could be that not much is understood in terms of designing these chiral aggregates. Herein, we report a strategy for creating such isolable chiral aggregates from achiral building blocks that retain chiral memory after the facile physical removal of the chiral templates. This strategy was used for the isolation of chiral homoaggregates of neutral achiral π-conjugated carboxylic acids in pure aqueous solution. Under what we have termed an "interaction-substitution" mechanism, we generated chiral homoaggregates of a variety of π-conjugated carboxylic acids by using carboxymethyl cellulose (CMC) as a mediator in acidic aqueous solutions. These aggregates were subsequently isolated from the CMC templates whilst retaining their memorized supramolecular chirality. Circular dichroism (CD) spectra of the aggregates formed in the acidic CMC solution exhibited bisignated exciton-coupled signals of various signs and intensities that were maintained in the isolated pure homoaggregates of the achiral π-conjugated carboxylic acids. The memory of the supramolecular chirality in the isolated aggregates was ascribed to the substitution of COOH/COOH hydrogen-bonding interaction between the carboxylic acid groups within the aggregates for the hydrogen-bonding interactions between the COOH groups of the building blocks and the chiral templates. We expect that this "interaction-substitution" procedure will open up a new route to isolable pure chiral aggregates from achiral species.     

堆积的胸腺嘧啶体系光物理失活的动力学模拟

采用半经典动力学方法模拟了π堆积的胸腺嘧啶体系最低激发态的光物理失活过程.设置激光脉冲仅作用于一个胸腺嘧啶分子T,另一胸腺嘧啶分子T’保持基态.模拟发现由于T与T’之间存在π堆积相互作用,导致电荷转移,形成T带负电荷、T’带正电符的激基复合物.由于相邻分子的空间效应阻碍了激发的T分子到达圆锥相交所必需的强烈扭曲,激基复合物的寿命比单体增长.当分子间距离缩短至0.3 nm后,T分子C₅—C₆键扭曲程度最大,此时发生电荷重组,两个胸腺嘧啶分子均恢复电中性.电荷重组诱导T’分子发生畸变,并在C₅’—C₆’扭曲最大时避免相交,体系衰减至基态,T和T’分子均恢复平面构型.