Electrocatalytic oxidation of formaldehyde and methanol on Ni(OH)2/Ni electrode

A nickel hydroxide-modified nickel electrode (Ni(OH)₂/Ni) was successfully prepared by the cyclic voltammetry (CV) method and the electrocatalytic properties of the electrode for formaldehyde and methanol oxidation have been investigated respectively. The Ni(OH)₂/Ni electrode exhibits high electrocatalytic activity in the reaction. A new method has been developed for formaldehyde determination at the nickel hydroxide-modified nickel electrode and the experimental parameters were optimized. The oxidation peak current is linearly proportional to the concentration of formaldehyde in the range of 7.0 × 10^?5 to 1.6 × 10^?2 M with a detection limit of 2.0 × 10^?5 M. Recoveries of artificial samples are between 93.3 and 103.5%. The effect of scan rate and methanol concentration on the electrochemical behavior of methanol were investigated respectively.     

Efficient Method for Synthesis of the Derivatives of 5‐Arylidene Barbituric Acid Catalyzed by Aminosulfonic Acid With Grinding

Aminosulfonic acid is an environmentally friendly catalyst. Grinding a mixture of aromatic aldehydes, barbituric acid, and H₂NSO₃H at room temperature (without any solvent) gave 5‐arylidene barbituric acid in high yields, providing a simple and efficient route to synthesis of these compounds.     

Clean,One‐Pot Synthesis of Naphthopyran Derivatives in Aqueous Media

A general and practical one‐pot synthesis of naphthopyran derivatives using hexadecyltrimethylammonium bromide (HTMAB) as catalyst (10 mol%) is described. This method provides several advantages such as neutral conditions, high yields and simple workup procedure. The catalyst is low cost, facile, active, environmentally friendly, and reusable. In addition, water is chosen as a green solvent.     

Synthesis of 2-(1-Arylcarbonyl-1-arylazomethylidene)-thiazolidines by the Reaction of 2-(Arylcarbonyl-methylidene)thiazolidines with Diazobenzenes

A variety of 2-(1-arylcarbonyl-1-arylazomethylidene)-thiazolidenes were synthesized in excellent yields by the reaction of 2-(arylcarbonylmethylidene)thiazolidines with diazobenzenes.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Indecomposable representations and boson realizations of the nonlinear deformed angular momentum algebra of Witten’s first type

In this paper indecomposable representations and boson realizations of the nonlinear angular momentum algebra $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ of Witten’s first type are investigated in a purely algebraic manner. Explicit form of the master representation of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ on the space of its universal enveloping algebra is given. Then, from this master representation, other indecomposable representations are obtained in explicit form. Various kinds of single-boson, single inverse boson, and double-boson realizations of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ are respectively obtained by generalizing the Holstein–Primakoff realization, the Dyson realization, and the Jordan–Schwinger realization of the Lie algebras SU(2) and SU(1,1). For each kind, the unitary realization, the nonunitary realization, and their connection by the corresponding similarity transformation are respectively discussed. Using a kind of double-boson realizations, the irreducible representation of $\mathcal{R}_{q,p}^{c_1,c_2,c_3}$ in the angular momentum basis is given.     

Electrochemical‐Reduction‐Assisted Assembly of a Polyoxometalate/Graphene Nanocomposite and Its Enhanced Lithium‐Storage Performance

Herein, we present an electrochemically assisted method for the reduction of graphene oxide (GO) and the assembly of polyoxometalate clusters on the reduced GO (rGO) nanosheets for the preparation of nanocomposites. In this method, the Keggin‐type H₄SiW₁₂O₄₀ (SiW₁₂) is used as an electrocatalyst. During the reduction process, SiW₁₂ transfers the electrons from the electrode to GO, leading to a deep reduction of GO in which the content of oxygen‐containing groups is decreased to around 5 %. Meanwhile, the strong adsorption effect between the SiW₁₂ clusters and rGO nanosheets induces the spontaneous assembly of SiW₁₂ on rGO in a uniformly dispersed state, forming a porous, powder‐type nanocomposite. More importantly, the nanocomposite shows an enhanced capacity of 275 mAh g^?1 as a cathode active material for lithium storage, which is 1.7 times that of the pure SiW₁₂. This enhancement is attributed to the synergistic effect of the conductive rGO support and the well‐dispersed state of the SiW₁₂ clusters, which facilitate the electron transfer and lithium‐ion diffusion, respectively. Considering the facile, mild, and environmentally benign features of this method, it is reasonable as a general route for the incorporation of more types of functional polyoxometalates onto graphene matrices; this may allow the creation of nanocomposites for versatile applications, for example, in the fields of catalysis, electronics, and energy storage.     

A novel efficient protocol for preparation of 3-formyl-2-arylbenzo[b]furan derivatives

An efficient method for preparation of 3-formyl-2-arylbenzo[b]furan derivatives 4 from 3-chloro-2-(2-methoxyaryl)-1-arylprop-2-en-1-one 2 was developed, and the desired product was obtained in good to excellent yields. By converting 2-(2-methoxyphenyl)-3-oxo-3-phenylpropanal 1 to 2, the regioselectivity problem occurring in the reaction when using 1 as the starting material was successfully avoided. Furthermore, a one-pot procedure for the successive demethylation, cyclization, and hydrolysis was evolved, although the intermediate 3-(dibromomethyl)-2-phenylbenzo[b]furan 3a could be isolated. A plausible mechanism was proposed based on some in situ investigations.     

Two Coordination Polymers Constructed from 5‐(4‐Pyridyl)‐1H‐tetrazole Ligands with Different Organic Carboxylates: Structure and Luminescence Properties

Two coordination polymers (CPs), namely, [Cu(Hptz)₂(Hhba)₂]_n ( 1 ) [Hptz = 5‐(4‐pyridyl)‐1H‐tetrazole, H₂hba = 2‐hydroxybenzoic acid] and [Zn₃(ptz)₂(hpa)₂]_n ( 2 ) (H2hpa = 2‐hydroxy‐2‐phenylacetic acid), were synthesized by solvothermal reactions. Both complexes were characterized by elemental analysis, infrared spectroscopy, powder X‐ray diffraction, thermogravimetric analysis, and single‐crystal X‐ray diffraction analysis. Compound 1 exhibits a 2D (4,4) network, where each layer connects to four adjacent layers to construct a 3D supramolecular framework. Compound 2 has a 3D framework structure composed of 1D SUBs, which are formed by both carboxyl and tetrazole groups. The complexes represent two rare examples of CPs constructed from Hptz and organic carboxyl acid ligands. Complex 2 exhibits intense, red‐shifted emissions in the visible region at room temperature.