Comparative study of Co3O4-ZSM-5 catalysts synthesized by different hydrothermal methods for the catalytic oxidation of dichloromethane

In this work, various Co₃O₄-ZSM-5 catalysts were prepared by the microwave hydrothermal method (MH-Co₃O₄@ZSM-5), dynamic hydrothermal method (DH-Co₃O₄@ZSM-5), and conventional hydrothermal method (CH-Co₃O₄/ZSM-5). Their catalytic oxidation of dichloromethane (DCM) was analyzed. Detailed characterizations such as X-ray diffractometer (XRD), scanning microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), temperature-programmed desorption of O₂ (O₂-TPD), temperature-programmed desorption of NH₃ (NH₃-TPD), diffuse reflectance infrared Fourier-transform spectra with NH₃ molecules (NH₃-DRIFT), and temperature-programmed surface reaction (TPSR) were performed. Results showed that with the assistance of microwave, MH-Co₃O₄@ZSM-5 formed a uniform core-shell structure, while the other two samples did not. MH-Co₃O₄@ZSM-5 possessed rich surface adsorbed oxygen species, higher ratio of Co³⁺/Co²⁺, strong acidity, high reducibility, and oxygen mobility among the three Co₃O₄-ZSM-5 catalysts, which was beneficial for the improvement of DCM oxidation. In the oxidation of dichloromethane, MH-Co₃O₄@ZSM-5 presented the best activity and mineralization, which was consistent with the characterizations results. Meanwhile, according to the TPSR test, HCl or Cl₂ removal from the catalyst surface was also promoted in MH-Co₃O₄@ZSM-5 by their abundant Brønsted acid sites and the promotion of Deacon reaction by Co₃O₄ or the synergistic effect of Co₃O₄ and ZSM-5. According to the results of in situ DRIFT studies, a possible reaction pathway of DCM oxidation was proposed over the MH-Co₃O₄@ZSM-5 catalysts.     

基于语义的软件服务故障自动诊断模型

模仿学习是机器人仿生机制研究的主要内容之一,即通过观察、理解、学习、模仿示教行为实现机器人的仿生特性。基于高斯过程分别表达采集离散示教信号所构成的示教轨迹和含有未知参数策略的模仿轨迹,构建模仿学习方法框架,将概率模型匹配引入到模仿学习中,以KL散度为代价函数比较两种轨迹的概率分布,运用梯度下降法寻求使KL散度最小的最优模仿控制策略,将策略应用于模仿机器人以完成与示教相同的模仿任务。以关节型机器人的机械臂摆动行为模仿为学习任务进行仿真,结果表明基于概率轨迹匹配的模仿学习方法能够实现机械臂摆动行为模仿,学习过程较传统方法简易且学习效果较好。     

Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

The influence of chemical structure on the antimicrobial activities of thiosemicarbazone-chitosan

We have previously reported the preparation of acetyl and benzoyl phenyl-thiosemicarbazone derivatives of chitosan and their antimicrobial activities. The purpose of this study was to further assess the relationship between chemical structure and antimicrobial activity of chloracetyl phenyl-thiosemicarbazone-chitosan. Ten new chloracetyl phenyl-thiosemicarbazone-chitosans were prepared, and their structures were characterized using FT-IR and elemental analysis. The synthesized compounds were tested against four species of bacteria and four crop-threatening pathogenic fungi. Different molecular weights and concentrations were evaluated. The antifungal activities of the synthesized compounds were related to the positive polarity of the N₄ atom and the distribution of the electron atmosphere in the C=S group. All chitosan compounds had inhibitory effects when tested with bacteria. The minimum MIC and MBC with Escherichia coli were 7.03 and 56.25 μg mL^?1, respectively.     

A Small‐Molecule FRET Reporter for the Real‐Time Visualization of Cell‐Surface Proteolytic Enzyme Functions

Real‐time imaging of cell‐surface‐associated proteolytic enzymes is critical to better understand their performances in both physiological and pathological processes. However, most current approaches are limited by their complexity and poor membrane‐anchoring properties. Herein, we have designed and synthesized a unique small‐molecule fluorescent probe, which combines the principles of passive exogenous membrane insertion and Förster resonance energy transfer (FRET) to image cell‐surface‐localized furin‐like convertase activities. The membrane‐associated furin‐like enzymatic cleavage of the peptide probe leads to an increased fluorescence intensity which was mainly localized on the plasma membrane of the furin‐expressed cells. This small‐molecule fluorescent probe may serve as a unique and reliable reporter for real‐time visualization of endogenous cell‐surfaceassociated proteolytic furin‐like enzyme functions in live cells and tissues using one‐photon and two‐photon microscopy.     

Rapid analysis of aflatoxins B1, B2, and ochratoxin A in rice samples using dispersive liquid–liquid microextraction combined with HPLC

A novel, simple, and rapid method is presented for the analysis of aflatoxin B₁, aflatoxin B₂, and ochratoxin A in rice samples by dispersive liquid–liquid microextraction combined with LC and fluorescence detection. After extraction of the rice samples with a mixture of acetonitrile/water/acetic acid, mycotoxins were rapidly partitioned into a small volume of organic solvent (chloroform) by dispersive liquid–liquid microextraction. The three mycotoxins were simultaneously determined by LC with fluorescence detection after precolumn derivatization for aflatoxin B₁ and B₂. Parameters affecting both extraction and dispersive liquid–liquid microextraction procedures, including the extraction solvent, the type and volume of extractant, the volume of dispersive solvent, the addition of salt, the pH and the extraction time, were optimized. The optimized protocol provided an enrichment factor of approximately 1.25 and with detection of limits (0.06–0.5 μg/kg) below the maximum levels imposed by current regulations for aflatoxins and ochratoxin A. The mean recovery of three mycotoxins ranged from 82.9–112%, with a RSD less than 7.9% in all cases. The method was successfully applied to measure mycotoxins in commercial rice samples collected from local supermarkets in China.     

Effects of Pellet Characteristics on L-Lactic Acid Fermentation by R. oryzae: Pellet Morphology,Diameter, Density,and Interior Structure

The effects of pellet morphology, diameter, density, and interior structure on L-lactic acid fermentation by Rhizopus oryzae were characterized for different inoculum sizes and concentrations of peptone and CaCO₃. Inoculum size was the most important factor determining pellet formation and diameter. The diameter decreased with increasing inoculum size, and larger pellets were observed for lower inoculum sizes. Peptone concentration had the greatest effect on pellet density, which increased with increasing peptone concentration. L-lactic acid production depended heavily on pellet density but not on pellet diameter. Low-density pellets formed easily under conditions of low peptone concentration and often had a relatively hollow structure, with a thin condensed layer surrounding the pellet and an extraordinarily loose biomass or hollow center. As expected, this structure greatly decreased production. The production of L-lactic acid increased until the density reached a certain level (50–60 kg/m³), in which the compact part was distributed homogeneously in the thick outer layer of the pellet and loose in the central layer. Homogeneously structured, denser pellets had limited mass transfer, causing a lower overall turnover rate. However, the interior structure remained nearly constant throughout all fermentation phases for pellets with the same density. CaCO₃ concentration only had a slight influence on pellet diameter and density, probably because it increases spore germination and filamentous hypha extension. This work also provides a new analysis method to quantify the interior structure of pellets, thus giving insight into pellet structure and its relationship with productivity.     

真空离心浓缩/气相色谱-质谱联用法测定白酒中6种邻苯二甲酸酯类增塑剂

建立了测定白酒中6种邻苯二甲酸酯类增塑剂的真空离心浓缩/气相色谱-质谱联用(GC-MS)分析方法。样品经真空离心浓缩,正己烷提取,取上层正己烷,4000r/min离心5min,采用GC-MS测定,外标法定量。在0.10～5.00μg/mL范围内,相关系数r20.992,样品在0.10～2.00 mg/kg范围内加标,平均回收率在88.83%～111.67%之间,相对标准偏差(RSD)为4.85%～11.35%,检出限(LOD)在0.02～0.05 mg/kg之间。采用该方法对16个白酒样品进行测定,结果表明该法简便、快速、结果准确可靠、灵敏度高,能够满足白酒中6种邻苯二甲酸酯增塑剂检测需求。     

MOF-Derived Double-Layer Hollow Nanoparticles with Oxygen Generation Ability for Multimodal Imaging-Guided Sonodynamic Therapy

The high reactive oxygen species (ROS) generation ability and simple construction of sonosensitizer systems remain challenging in sonodynamic therapy against the hypoxic tumor. In this work, we rationally prepared MOF-derived double-layer hollow manganese silicate nanoparticle (DHMS) with highly effective ROS yield under ultrasound irradiation for multimodal imaging-guided sonodynamic therapy (SDT). The presence of Mn in DHMS increased ROS generation efficiency because it could be oxidized by holes to improve the electron–hole separation. Moreover, DHMS could produce oxygen in the tumor microenvironment, which helps overcome the hypoxia of the solid tumor and thus enhance the treatment efficiency. In vivo experiments demonstrated efficient tumor inhibition in DHMS-mediated SDT guided by ultrasound and magnetic resonance imaging. This work presents a MOF-derived nanoparticle with sonosensitive and oxygen generating ability, which provides a promising strategy for tumor hypoxia in SDT.