Pt/NbPWO双功能催化剂的制备及氢解碱木质素制备芳香单体

木质素是一种天然芳香族聚合物,约占木质纤维素的30%,是唯一通过裂解C―O醚键和C―C键生产芳香族化学品或液体燃料的可再生芳香族资源。迄今为止,对木质素氢解制备有价值化合物的研究主要集中在相对不稳定的C―O键的裂解上,这限制了木质素氢解的效率。采用水热法和湿浸渍法制备了多功能Pt/NbPWO催化剂。通过破坏碱木质素中的C―O键和C―C键,可以得到产率为18.02%的芳香族单体。该反应不仅可以断裂木质素聚合物中醚键,同时也可以断裂部分关键的C―C键。其氢解机理可能是丰富的Brønsted酸和Lewis酸位点参与了C―C的活化。此外,重点分析载体和Pt物种在Pt/NbPWO催化剂中的协同作用。     

基于共价有机骨架材料的磁固相萃取-超高效液相色谱-串联质谱法测定水中4种杀菌剂

杀菌剂在环境中长期富集后会引起土壤和植物病害,并能借助雨水或灌溉渗透到深层土壤和地下水中,威胁水体环境和人体健康。因此针对水中杀菌剂开发简单快速、高效灵敏的分析方法至关重要。该研究通过原位合成法制备了磁性共价有机骨架材料Fe₃O₄@TpBD,将其作为萃取吸附剂,富集环境水体中苯并咪唑杀菌剂(噻菌灵、麦穗宁、多菌灵)和有机硫杀菌剂(稻瘟灵)。利用Fe₃O₄@TpBD与杀菌剂之间的π-π共轭、氢键和静电作用进行吸附,结合超高效液相色谱-串联质谱法(UHPLC-MS/MS)进行检测,建立了测定水中4种痕量杀菌剂的分析方法。通过透射电子显微镜、X射线衍射及傅里叶变换红外光谱等方式对Fe₃O₄@TpBD进行表征,以证明材料的成功合成。对萃取条件进行一系列的优化(Fe₃O₄@TpBD的磁性比例及用量、水样pH、吸附时间、洗脱液的种类及体积、洗脱时间、NaCl含量),确定了最佳萃取条件。4种杀菌剂在3~1200 ng/L的范围内线性关系良好,线性相关系数均大于0.998,方法的检出限和定量限分别为0.06~0.28 ng/L和0.20~0.92 ng/L。在15、150和600 ng/L 3个加标水平下进行加标回收试验,日内和日间精密度分别为2.8%~10.0%和4.4%~15.7%。将该方法用于实际水样的检测,4种杀菌剂的加标回收率为77.1%~119.1%,在水库水中检测出多菌灵,含量为27.5 ng/L。该方法灵敏度高,准确度和精密度良好,操作简单,耗时短。     

Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with high-performance liquid chromatography was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting the extraction procedure, including extractant volume, salt concentration, demulsifier consumption, and demulsification time, were further evaluated by a central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005–0.5 μg/mL for bisdemethoxycurcumin, 0.004–0.4 μg/mL for demethoxycurcumin, and 0.0045–0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1–0.4 ng/mL) and high enrichment factors (279–350). Its intra-day and inter-day precision were carried out by relative standard deviation ranging from 2.2 to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3-108.9% with relative standard deviations of 1.6-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis.     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

Removal of Cu(II) Contamination from Aqueous Solution by Ethylenediamine@β-Zeolite Composite

The low cost β-zeolite and ethylenediamine modified β-zeolite (EDA@β-zeolite) were prepared by self-assembly method and used for Cu(II) removal from contaminated aqueous solution. Removal ability of β-zeolite toward Cu(II) was greatly improved after ethylenediamine (EDA) modification, the removal performance was greatly affected by environmental conditions. XPS results illustrated that the amide group played important role in the removal process by forming complexes with Cu(II). The EDA@β-zeolite showed desirable recycling ability. The finding herein suggested that the proposed composite is a promising and suitable candidate for the removal of Cu(II) from contaminated natural wastewater and aquifer.     

基于核酸的纸基荧光生物传感器的设计及应用

纸基生物传感器由于其具有成本低、操作方便、生物可降解、识别元件用量低等优点,近年来受到了广泛的关注。其中,以功能核酸作为识别元件的纸基荧光生物传感器具有较高的灵敏度、瞬时响应以及实时检测等特性,在便携式传感设备方面展现出巨大的潜力。此外,将核酸作为识别元件的纸基无细胞蛋白合成平台,通过条件合成的报告荧光蛋白可实现对病毒、重金属等目标物的特异性检测,具有良好的应用前景。首先,本文介绍了基于核酸的纸基荧光生物传感器的设计,特别是基于核酸的识别元件与纸基材料的结合方式。其次,总结了基于核酸的纸基荧光生物传感器在临床诊断、食品安全检测、环境污染物检测等不同领域的最新研究进展,讨论了其优势与局限性。最后,探讨了基于核酸的纸基荧光生物传感器的发展方向与应用前景,以期为相关领域的研究提供参考。     

Cylindrical invisibility cloak with simplified material parameters is inherently visible

It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination [J. B. Pendry, D. Schurig, and D. R. Smith, Science 312, 1780 (2006)10.1126/science.1125907]. The cylindrical cloaks experimentally demonstrated [D. Schurig, Science 314, 977 (2006)10.1126/science.1133628] and theoretically proposed [W. Cai, Nat. Photon. 1, 224 (2007)10.1038/nphoton.2007.28] have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if the cloak is made of a homogeneous isotropic medium, and thus visible. To all high-order cylindrical waves, our numerical simulation suggests that the simplified cloak inherits some properties of the ideal cloak, but finite scatterings exist.     

Ideal cylindrical cloak: perfect but sensitive to tiny perturbations

A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, because of the slow convergence of the zeroth-order scattering coefficients, a tiny perturbation on the cloak would induce a noticeable field scattering and penetration.     

Cu/MoS2的熔盐电解法制备及其在碱性条件下析氢反应性能的提高

通过熔盐电解法并掺杂过渡金属Cu制备2种不同纳米结构的Cu/MoS_2。采用涂敷法制备工作电极,通过X射线衍射(XRD)、透射电子显微镜(TEM)、能量散射X射线谱(EDS)、扫描电子显微镜(SEM)、选区电子衍射(SAED)以及各种电化学手段验证了其结构和性能。结果表明,纳米片状Cu/MoS_2在碱性溶液(1 mol·L~(-1)KOH)中表现出优异的析氢催化性能:在电流密度为10 mA·cm~(-2)时过电位为199.6 mV,Tafel斜率为59 mV·dec~(-1),双电层电容为26.1 mF·cm~(-2),等效电荷转移电阻为12.4Ω,具有较为良好的电化学耐久性和稳定性。     

Microplasma electrochemistry (MIPEC) strategy for accelerating the synthesis of metal organic frameworks at room temperature

Metal organic frameworks(MOFs) are a kind of promising materials in many applications,while the fast and controllable synthesis of MOFs is still challenging.Here,taking HKUST-1 as illustration,a microplasma electrochemistry(MIPEC) strategy was developed to accelerate the synthesis process of MOFs with micro-plasma acting as cathode.Treating the HKUST-1 precursor solution with micro-plasma cathode could not only transfer the electrons into the solution leading to the deprotonation effect,but also generate radical species to trigger and accelerate the nucleation and growth of MOFs at the plasmaliquid interface.Thus,uniform and nanosize MOFs could be prepared within minutes.The obtained MOFs show similar excellent uranium adsorption properties compared with those obtained by other method,with a highly adsorption capability of uranium with 550 mg/g in minutes.The novel MIPEC strategy developed in this work provides an alternative for controllable synthesis of MOFs,and especially has potential application in accelerating traditional organic synthesis.