Experimental Investigation on Binary Phase Diagram of the Thermotropic Phase Transitions Compounds (n‐CnH2n+1R3)2ZnCl4

The thermotropic phase transitions compounds (n‐C_nH_2n+1R₃)₂ZnCl₄ as well as a series of their binary mixtures were prepared by a solution reflux method from their ethanol solutions. The experimental subsolidus binary phase diagram of [n‐C₁₈H₃₇N(CH₃)₃]₂ZnCl₄‐[n‐(C₁₈H₃₇)₂N(CH₃)₂]₂ZnCl₄ is constructed over the entire composition range by differential scanning calorimetry(DSC) and X‐ray. Experi‐ mental results indicate one stable intermediate phase [n‐C₁₈H₃₇N(CH₃)₃] [n‐(C₁₈H₃₇)₂N(CH₃)₂]ZnCl₄ at W_C18C3Zn %=59.75 %, and two invariant three phase equilibria, which shows two eutectoid temperatures: Te₁ at 310±1 K for eutectoid point W_C18C3Zn %=36.24 %, Te₂ at 313±1 K for eutectoid point W_C18C3Zn %=80.17 %. These three noticeable solid‐solution ranges are α‐phase at the left, ?‐phase at the right, and ψ‐phase in the middle of the phase diagram. It is (n‐C_nH_2n+1R₃)₂ZnCl₄ systems as phase change materials that are characterized the phase transition temperatures T in the range of 310 to 340 K, the transition enthalpies ΔH in the range of 38.40 and 168.72 J/g between two polymorphic forms.     

Pt/MIL-101(Cr)在肉桂醛选择性加氢反应中的催化性能

采用简单易行的浸渍法将Pt纳米粒子负载到MIL-101(Cr)上,制备了Pt/MIL-101(Cr)催化剂,并对其在肉桂醛选择性加氢反应的催化性能进行了研究。XRD、N₂吸附、TEM和催化性能的研究结果表明,Pt的负载量对负载于MIL-101(Cr)上Pt纳米粒子的尺寸及所制备催化剂对肉桂醇的选择性有很大影响。低Pt负载量(1.0%)的Pt/MIL-101(Cr)较其他MOFs和无机材料在肉桂醛选择性加氢反应中表现出了高的催化性能,在优化的反应条件下肉桂醛转化率和对肉桂醇的选择性可分别达96.5%和86.2%。Pt/MIL-101(Cr)催化剂具有良好的稳定性。Pt/MIL-101(Cr)所表现出的优良的催化性能同MIL-101(Cr)载体的孔道结构及其表面性质密切相关。     

Development and validation of polymerized high internal phase emulsion monoliths coupled with HPLC and fluorescence detection for the determination of trace tetracycline antibiotics in environmental water samples

A polymerized high internal phase emulsion monolith was used as a novel sorbent for solid‐phase extraction coupled with high‐performance liquid chromatography and fluorescence detection for the determination of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline in environmental water samples. The polymerized high internal phase emulsion monolithic column was prepared by the in situ polymerization of the continuous phase of a high internal phase emulsion containing glycidyl methacrylate, styrene, and divinylbenzene in pipette tips, and then functionalized with iminodiacetic acid. The resulting monolith exhibited highly interconnected porosity and large surface areas, making it an excellent candidate as an solid‐phase extraction sorbent for the enrichment of trace tetracycline antibiotics. Several factors affecting the extraction performance of polymerized high internal phase emulsion monoliths, including the pH of sample solution, the eluting solvents, the sample loading flow rate and volume, were investigated, respectively. Under the optimized conditions, the mean recoveries of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline spiked in pond and farm wastewater samples ranged from 78.1 to 119.3% with relative standard deviation less than 15%. The detection limits (S/N = 3) of the proposed method were in the range of 51–137 pg/mL. This study demonstrated that the monolithic polymerized high internal phase emulsion would be promising solid‐phase extraction sorbents in the extraction and proconcentration of trace analytes from complex samples.     

An improved and practical route for the synthesis of enzalutamide and potential impurities study

An improved and practical synthesis of enzalutamide was accomplished in five steps. Starting from 4-bromo-2-fluoro-benzonic acid, a methyl esterification, Ullmann ligation, methyl esterification, ring closing reaction and final methyl amidation provided the target in 35% total yield with 99.8% purity. Five identified impurities were also synthesized. This efficient and economical procedure avoids the use of highly toxic reagents and multiple recrystallization operations, which is suitable for further industrialization.     

1,4-戊二烯-3-酮肟醚类化合物的合成及生物活性

将1,4-戊二烯-3-酮结构中的羰基转变为肟醚基团,合成了7个1,4-戊二烯-3-酮肟醚类化合物,其结构经1H NMR、13C NMR、IR和ESI-MS表征。生物活性测试结果表明,在药剂浓度为500mg/L时,化合物4c、4f和4g对烟草花叶病毒(TMV)在治疗作用方面的抑制率为49.6%、53.6%和47.4%,与病毒唑(45.2%)相当;化合物4b、4c、4f和4g对TMV在保护作用方面的抑制率分别为57.2%、58.4%、58.9%和59.0%,稍低于病毒唑(61.8%);化合物4a、4b、4c和4g对TMV在钝化作用方面的抑制率分别为95.5%、92.6%、95.0%和89.5%,优于对照药病毒唑(87.9%)。这些结果表明,1,4-戊二烯-3-酮肟醚类化合物对植物病毒表现有良好抑制作用,在其结构基础上进行适当的优化,有望得到具有良好抗植物病毒活性的先导化合物。     

自辐射场下UN2分子的光谱研究

对铀原子和氮原子分别使用相对论有效原子实势和6-311+G(d)基组, 采用优选的密度泛函B3P86方法, 研究了铀本身产生自辐射场(-0.005–0.005 a.u.)作用下UN₂基态分子的能隙E_g和谐振频率ν. 结果表明: UN₂分子在自辐射场中反对称伸缩振动频率ν₃(σ_g)和对称伸缩振动频率σ₁(σ_g)与实验值1051.1 cm^-1和1008.3 cm^-1 基本符合; E_g随自辐射场场强的增大而趋于减少, 占据轨道的电子容易被激发至空轨道而形成激发态; UN₂分子在自辐射场中趋于不稳定, N₂, O₂等更容易扩散到表面内层而腐蚀铀表面, 加剧了铀在自辐射场中的腐蚀.     

硅衬底氮化镓基LED薄膜转移至柔性黏结层基板后其应力及发光性能变化的研究

本文将硅(Si)衬底上外延生长的氮化镓(GaN)基发光二极管(LED)薄膜转移至含有柔性黏结层的基板上, 获得了不受衬底和支撑基板束缚的LED薄膜. 利用高分辨率X射线衍射仪(HRXRD)研究了薄膜转移前后的应力变化, 同时对其光致发光(PL)光谱的特性进行了研究. 结果表明: 硅衬底GaN基LED薄膜转移至柔性基板后, GaN受到的应力会由转移前巨大的张应力变为转移后微小的压应力, InGaN/GaN量子阱受到的压应力则增大; 尽管LED薄膜室温无损转移至柔性基板其InGaN阱层的In组分不会改变, 然而按照HRXRD倒易空间图谱通用计算方法会得出平均铟组发生了变化; GaN基LED薄膜从外延片转移至柔性基板时其PL谱会发生明显红移.     

时间频率基准装置的研制现状

时间频率基准装置——铯原子喷泉钟, 在标准时间产生和保持、基础物理研究中发挥了重要的作用. 介绍了铯原子喷泉钟的工作原理, 对影响其性能的各项噪声源和频移项给出了分析, 影响频率稳定度性能的主要因素为Dick 效应相关的原子团装载时间、微波激励源相位噪声和探测激光的频率噪声, 影响频率不确定性能主要频移项为: 黑体辐射频移、冷原子碰撞频移、腔相位分布频移和微波泄露频移; 总结和比较了当前具有先进性能的铯原子喷泉钟采用的技术; 介绍了铯原子喷泉钟的主要应用方向、空间冷原子铯钟的研制情况和光学频率原子钟进展.     

Solvothermal synthesis of nanoporous polymer chalk for painting superhydrophobic surfaces

Reported here is a facile synthesis of nanoporous polymer chalk for painting superhydrophobic surfaces. Taking this nanoporous polymer as a media, superhydrophobicity is rapidly imparted onto three typical kinds of substrates, including paper, transparent polydimethylsiloxane (PDMS), and finger skin. Quantitative characterization showed that the adhesion between the water droplet and polymer-coated substrates decreased significantly compared to that on the original surface, further indicating the effective wetting mode transformation. The nanoporous polymer coating would open a new door for facile, rapid, safe, and larger scale fabrication of superhydrophobic surfaces on general substrates.     

Degradation studies on segmented polyurethanes prepared with poly (d, l-lactic acid) diol, hexamethylene diisocyanate and different chain extenders

In order to investigate the effect of different chain extenders on degradation properties of segmented polyurethanes (SPUs), three types of segmented polyurethanes (SPU-P, SPU-O and SPU-A) based on poly (d, l-lactic acid) diol, hexamethylene diisocyanate (HDI), were synthesized with three chain extenders: peperazine (PP), 1, 4-butanediol (BDO) and 1, 4-butanediamine (BDA), respectively. Thermogravimetric analysis, activation energy and in vitro degradation were used to characterize the obtained polymers, quantitatively. The results revealed that chain extender played an important role in thermal degradation and biodegradation of polyurethanes. Thermogravimetric analysis and activation energy demonstrated that SPU-O, SPU-P and SPU-A presented best, second and weakest thermostability, respectively, and the thermal degradation mechanism of three SPUs was the same and regarded as a two-stage degradation. Data of hydrolytic degradation of the polymers during 12 weeks indicated that the in vitro degradation stability of SPU-A and SPU-P was similar, but both were better than that of SPU-O. The reason for the differences among three types of SPUs was discussed in this paper.