强脉冲电磁力驱动的冲击载荷

冲击载荷在材料科学与工程领域具有一定的应用。随着研究的深入, 对冲击速度、冲击能量提出了更高的需求, 是落锤所无法达到的。强脉冲磁场可由脉冲大电流产生, 通过合适的装置可产生强脉冲电磁力, 进而可转换为冲击载荷。通过数值模拟, 给出了强脉冲磁场、电磁力及冲头运动过程的数值模拟结果。采用高速摄像对该压缩冲击装置的运动过程进行记录, 通过对影像数据处理获得了冲击速度及冲击能量, 验证了模拟结果。     

A FURTHER STUDY OF THE THEORY OF ELASTIC CIRCULAR PLATES WITH NON－KIRCHHOFF－LOVE ASSUMPTIONS

ＡＦＵＲＴＨＥＲＳＴＵＤＹＯＦＴＨＥＴＨＥＯＲＹＯＦＥＬＡＳＴＩＣＣＩＲＣＵＬＡＲＰＬＡＴＥＳＷＩＴＨＮＯＮ－ＫＩＲＣＨＨＯＦＦ－ＬＯＶＥＡＳＳＵＭＰＴＩＯＮＳＣｈｉｅｎＷｅｉ－ｚａｎｇ（钱伟长）ＲｕＸｕｅ－ｐｉｎｇ（茹学萍）（ＳｈａｎｇｈａｉＵｎｉ...     

风速对室内气流分布影响的数值仿真

对低温空调系统送风特性进行了研究,着重于低温送风空气流动状况及其对室内环境的影响.以某一典型的空调房间为研究目标,利用计算流体动力学(CFD),研究在低温送风条件下,室内气流组织的分布状况.通过建立合理的数学模型进行数值模拟,运用试验手段验证了模拟结果的可靠性,得到几种送风速度下的室内气流速度场与温度场的计算结果.经过分析,确定该空调室的送风速度范围与最佳值.最后得出每一种低温送风系统对应着一定的送风速度范围的结论.     

On the application of boundary layer method in the large deflection plastic buckling of a cylindrical shell

Using a cylindrical shell under axial loading as an example, we discuss the possibility of applying the membrane theory together with the boundary layer correction to analyze the large deflection plastic buckling problem. In the cases of fixed ends and simply-supported ends, the conditions to be satisfied for using the boundary layer method (also called the composite-expansion method) are given and discussed.     

Sampling and digestion of waste mobile phones printed circuit boards for Cu,Pb, Ni,and Zn determination

Sampling is the most important procedure in arriving at the value of an electronic scrap. Inappropriate sampling makes other procedures, including assaying, valueless, as the sample must really represent the electronic scrap from which it was taken. The aim of this study was to develop the procedure to investigate the composition of heterogeneous printed circuit boards (PCBs) material and to show its applicability as well as its related limitations. The contents of Cu, Pb, Ni, and Zn in PCBs from wasted mobile phones were determined. Mixtures of aqua regia, hydrogen peroxide and hydrofluoric acid were applied to sample digestion. Open and closed vessel wet digestion with or without heating and microwave-assisted one was realized. For these purposes different sample amounts (0.2, 0.4, and 0.5 g) were applied and on the basis of calculated relative standard deviation values (RSD), the precision of repeated the most effective digestion was evaluated. The microwave-assisted wet digestion and mixture of aqua regia and hydrogen peroxide was found as the most effective one of the compared mixtures and applied conditions. A sample amount of 0.5 g was found as the most suitable. RSD values confirm the importance of electronic waste material sample preparation.     

Interaction between a dark spot and a two-dimensional nonlinear photonic lattice with fully incoherent white light

We study experimentally the interaction of a dark spot with a nonlinear photonic lattice with fully incoherent white light emitted from an incandescent bulb in the self-defocussing photovoltaic media when the dark spot is aimed at different positions of lattices with different lattice spacing. In this case a host of novel phenomena is demonstrated, including dark spot induced lattice dislocation-deformation, the annihilation of the dark spot and so on. Results demonstrate that the interaction between incoherent dark spot and photonic lattice is always attraction and the large-spacing photonic lattice is analogous to the continuous medium.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.