Low-dimensionality energy landscapes: Magnetic switching mechanisms and rates

In this paper we propose a new method for the study and visualization of dynamic processes in magnetic nanostructures, and for the accurate calculation of rates for such processes. The method is illustrated for the case of switching of a grain of an exchange-coupled recording medium, which switches through domain wall nucleation and motion, but is generalizable to other rate processes such as vortex formation and annihilation. The method involves calculating the most probable (lowest energy) switching path and projecting the motion onto that path. The motion is conveniently visualized in a two-dimensional (2D) projection parameterized by the dipole and quadrupole moment of the grain. The motion along that path can then be described by a Langevin equation, and its rate can be computed by the classic method of Kramers [4]. The rate can be evaluated numerically, or in an analytic approximation—interestingly, the analytic result for domain-wall switching is very similar to that obtained by Brown in 1963 for coherent switching, except for a factor proportional to the domain-wall volume. Thus in addition to its lower coercivity, an exchange-coupled medium has the additional advantage (over a uniform medium) of greater thermal stability, for a fixed energy barrier.     

Infrared and Raman investigation of the charge–density-wave state in rare-earth tri-telluride compounds

We summarize our recent efforts in investigating the charge–density-wave (CDW) state of the rare-earth tri-tellurides RTe₃ by means of infrared and Raman techniques. We identify the CDW gap, as order parameter of the broken-symmetry ground state, as well as the collective mode of the CDW condensate.     

Structure–activity relationships of anthocyanidin glycosylation

This paper summarizes the main achievements about the structure–activity relationships of anthocyanidin glycosylation. Anthocyanidin glycosylation is the essential step of anthocyanin biosynthesis and also the prerequisite of the further modifications of anthocyanins, which is jointly characterized by the glycosylation site, the type and number of the glycosyl as well as the glycosidic bond type. It generally enhances the stability, results in the hypsochromic effect and blueing, decreases the bioavailability and anticancer activity, and decreases, increases, or does not change the antioxidant activity of the anthocyanidins or anthocyanins, which is synergetically determined by the glycosylation site and the type and number of the glycosyl. Thereinto, in nature, the blue hues caused by the glycosylation may also be reinforced by the formation of the anthocyanic vacuolar inclusions. This review could provide a reference for the research of the structure-optimizing and function-exploiting of anthocyanins.     

Theoretical Study on Experimentally Detected Sc2S@C84

Sc₂S@C₈₄ has recently been detected but not structurally characterized. 1 Density functional theory calculations on C₈₄ and Sc₂S@C₈₄ show that the favored isomer of Sc₂S@C₈₄ shares the same parent cage as Sc₂C₂@C₈₄, whereas Sc₂S@C₈₄:51383, which violates the isolated‐pentagon rule, is the second lowest energy isomer with the widest HOMO–LUMO gap and shows high kinetic stability. The analysis shows that Sc₂S@C₈₄:51575 is favored when the temperature exceeds 2 800 K and it can transform into the most favorable isomer Sc₂S@C₈₄:51591. Molecular orbital analysis indicates that both Sc₂S and Sc₂C₂ formally transfer four electrons to the cage, and quantum theory of atoms in molecules analysis demonstrates that there is a covalent interaction between Sc₂S and C₈₄:51591. The IR spectra of Sc₂S@C₈₄ are provided to aid future structural identification.     

The effect of polymer dispersions on the early hydration of calcium sulfoaluminate cement

The influence of three polymer dispersions [styrene–butadiene copolymer (SB), styrene–acrylic ester copolymer (SA) and polyacrylic ester (PA)] on the hydration of calcium sulfoaluminate (CSA) cement within 72 h was investigated by using isothermal conduction calorimetry, X-ray diffraction analysis and thermal gravimetric analysis. The results indicate that these three polymer dispersions perform different influences on the hydration heat flow of CSA cement during different periods, they all postpone the occurrence time of the maxima peaks, and its extent is mainly dependent on the addition amount. Polymer dispersions manifest great retardation on the initial hydration of CSA cement, and the effect is much more significant within 1 h. In this stage, the generation of ettringite is strongly delayed; however, the formation of ettringite is accelerated by these polymer dispersions at and after 2 h. Among these three polymer dispersions, PA demonstrates the highest acceleration effect on the hydration degree.

     

Investigation on the structure,fluoride vaporization and crystallization behavior of CaF2–CaO–Al2O3–(SiO2) slag for electroslag remelting

Journal of Thermal Analysis and Calorimetry - The structure, vaporization behavior and crystallization of CaF2–CaO–Al2O3 slags with different SiO2 contents for electroslag remelting...     

The complexation of apo-metallothionein with cadmium ion and its conformation study

The circular dichroism was used to study the complexation of two isoforms of rabbit liver apo-metallothioneins (apo-MT1 and apo-MT2) with Cd²⁺ ion and the influence of Cd²⁺ ion on the conformation of reconstituted MTs. The stability of sulfhydryls of apo-MT has been investigated at the room temperature in the presence of air. The reconstitutions of apo-MT1 with Cd²⁺ ion were carried out atpH 4.71 (stable state) andpH 7.9 (with 90% sulfhydryls oxidated) respectively. it was found that the characteristic CD band at 257 nm(+), 238 nm(?), 226 nm(+) of reconstituted MT with Cd²⁺ ion was the same as native MT atpH 4.71, however only one peak at 243 nm(+) appeared on the CD spectra atpH 7.9 which arose from mononuclear complexes with four separated thiolate ligands per Cd²⁺ ion. The CD spectra of apo-MTs+7 eq Cd²⁺ system were measured at variouspH values. It was found that the peak at 256 nm of apo-MT1 binding Cd²⁺ ion split into two small peaks atpH between 2.42 and 3.02, and became one peak atpH 3.32, while the shapes of Cd peaks of apo-MT2 binding Cd²⁺ ion did not change withpH, indicating that the binding sites and pathway of apo-MT1 binding Cd²⁺ ion were different from those of apo-MT2. A possible mechanism was suggested.     

Trace determination of hexabromocyclododecane diastereomers in water samples with temperature controlled ionic liquid dispersive liquid phase microextraction

A novel temperature controlled ionic liquid dispersive liquid phase microextraction(TCIL-DLPME) coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry(RRLC-ESI-MS-MS) has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers(HBCDs) in water samples.Green solvent ionic liquid(IL) was used as extraction solvent instead of toxic organic solvents.This technique also avoided the usage of dispersive solvent.Some important parameters that might affect the extraction efficiency were optimized.Under the optimum conditions,good linear relationship,sensitivity and reproducibility were obtained.All the limits of detection for the three diastereomers were 0.1 ng/ mL.The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers.It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2%to 99.3%.The main advantage of the method is toxic organic solvent-free.     

西瓜中4种植物生长调节剂残留的分析方法研究

建立了固相萃取/高效液相色谱法测定西瓜中24-二氯苯氧乙酸(24-D)、赤霉素(GA3)、多效唑(PP333)、6-苄氨基嘌呤(6-BA) 4种植物生长调节剂残留的方法.样品用80%甲醇溶液提取,采用Strata C18固相萃取小柱进行富集、净化,以甲醇-0.15%磷酸水溶液为流动相,梯度洗脱,经ZORBAX Ec...