Incorporation and exclusion of long chain alkyl halides in fatty acid monolayers at the air-water interface

Mixed monolayers of deuterated palmitic acid C(15)D(31)COOH (dPA) and deuterated stearic acid C(17)D(35)COOH (dSA) with 1-bromoalkanes of different alkyl chain length (C(4) to C(16)) at the air-water interface were investigated. Alkanes and 1-chlorohexadecane ClC(16)H(33) (ClHex) were also studied to compare the effects of the halogen on the mixed monolayers. Surface pressure-area isotherms and Brewster angle microscopy (BAM) were used to obtain the organization and phase behavior, providing a macroscopic view of the mixed monolayers. A molecular-level understanding of the interfacial molecular organization and intermolecular interactions was obtained by using vibrational sum frequency generation (SFG) spectroscopy and infrared reflection-absorption spectroscopy (IRRAS). It was found that from the alkyl halide molecules investigated 1-bromopentadecane, BrC(15)H(31) (BrPent), 1-bromohexadecane, BrC(16)H(33) (BrHex), and ClHex incorporate into the fatty acid monolayers. Alkanes of 15- and 16-carbon chain length do not incorporate into the fatty acid monolayer, which suggests that the halogen is needed for incorporation. Isotherms and spectra suggest that BrHex molecules are squeezed out, or excluded, from the fatty acid monolayer as the surface pressure is increased, while BAM images confirm this. Additionally, SFG spectra reveal that the alkyl chains of both fatty acids (dPA and dSA) retain an all-trans conformation after the incorporation of alkyl halide molecules. BAM images show that at low surface pressures BrHex does not affect the two-dimensional morphology of the dPA and dSA domains and that BrHex is miscible with dPA and dSA. We also present for the first time BAM images of BrHex deposited on a water surface, which reveal the formation of aggregates while the surface pressure remains unchanged from that of neat water.     

Imino‐Bridged Bisphosphaalkenes (2,4‐Diphospha‐3‐azapentadienes)

Deprotonation of aminophosphaalkenes (RMe₂Si)₂C?PN(H)(R′) (R=Me, iPr; R′=tBu, 1‐adamantyl (1‐Ada), 2,4,6‐tBu₃C₆H₂ (Mes*)) followed by reactions of the corresponding Li salts Li[(RMe₂Si)₂C?P(M)(R′)] with one equivalent of the corresponding P‐chlorophosphaalkenes (RMe₂Si)₂C?PCl provides bisphosphaalkenes (2,4‐diphospha‐3‐azapentadienes) [(RMe₂Si)₂C?P]₂NR′. The thermally unstable tert‐butyliminobisphosphaalkene [(Me₃Si)₂C?P]₂NtBu ( 4 a ) undergoes isomerisation reactions by Me₃Si‐group migration that lead to mixtures of four‐membered heterocyles, but in the presence of an excess amount of (Me₃Si)₂C?PCl, 4 a furnishes an azatriphosphabicyclohexene C₃(SiMe₃)₅P₃NtBu ( 5 ) that gave red single crystals. Compound 5 contains a diphosphirane ring condensed with an azatriphospholene system that exhibits an endocylic P?C double bond and an exocyclic ylidic P⁽⁺⁾? C^(?)(SiMe₃)₂ unit. Using the bulkier iPrMe₂Si substituents at three‐coordinated carbon leads to slightly enhanced thermal stability of 2,4‐diphospha‐3‐azapentadienes [(iPrMe₂Si)₂C?P]₂NR′ (R′=tBu: 4 b ; R′=1‐Ada: 8 ). According to a low‐temperature crystal‐structure determination, 8 adopts a non‐planar structure with two distinctly differently oriented P?C sites, but ³¹P NMR spectra in solution exhibit singlet signals. ³¹P NMR spectra also reveal that bulky Mes* groups (Mes*=2,4,6‐tBu₃C₆H₂) at the central imino function lead to mixtures of symmetric and unsymmetric rotamers, thus implying hindered rotation around the P? N bonds in persistent compounds [(RMe₂Si)₂C?P]₂NMes* ( 11 a , 11 b ). DFT calculations for the parent molecule [(H₃Si)₂C?P]₂NCH₃ suggest that the non‐planar distortion of compound 8 will have steric grounds.     

Organoselenium compounds containing pyrazole or phenylthiazole groups: Synthesis,structure, tin(IV) complexes and antiproliferative activity

The diorganodiselenides (pzCH₂CH₂)₂Se₂ ( 1 ) and (PhtzCH₂)₂Se₂ ( 2 ) were prepared by reacting Na₂Se₂ with 1‐(2‐bromoethyl)‐1H‐pyrazole and 4‐(chloromethyl)‐2‐phenylthiazole, respectively, while the reactions between 1‐(2‐bromoethyl)‐1H‐pyrazole or 4‐(chloromethyl)‐2‐phenylthiazole and the lithium organoselenolates [2‐(Et₂NCH₂)C₆H₄]SeLi and [2‐{O(CH₂CH₂)₂NCH₂}C₆H₄]SeLi in a 1:1 molar ratio resulted in the heteroleptic diorganoselenium(II) compounds [2‐(Et₂NCH₂)C₆H₄](R)Se (R = pzCH₂CH₂ ( 3 ) or PhtzCH₂ ( 5 )) and [2‐{O(CH₂CH₂)₂NCH₂}C₆H₄](R)Se (R = pzCH₂CH₂ ( 4 ) or PhtzCH₂ ( 6 )). The diorganotin(IV) bis(organoselenolato) derivatives of type R₂Sn(SeCH₂CH₂pz)₂ (R = 2‐(Me₂NCH₂)C₆H₄ ( 7 ) or Me ( 8 )) were obtained by reacting (pzCH₂CH₂)SeNa with the appropriate diorganotin(IV)dichloride in a 2:1 molar ratio. All compounds were investigated using NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, ¹¹⁹Sn as appropriate) and ESI+ mass spectrometry. The molecular structures of 2 and 6 were determined using single‐crystal X‐ray diffraction. The formation of a 10–Se–3 hypercoordinated species was evidenced for 6 in the solid state, as a consequence of the C,N coordination behaviour of the 2‐{O(CH₂CH₂)₂NCH₂}C₆H₄ group. Compounds 1 , 7 and 8 were investigated for their antiproliferative activity towards the mouse colon carcinoma C26 cell line with the preliminary results showing a better activity than 5‐fluorouracil.     

High resolution mass spectrometric characterization of amino linked oligosaccharides — a preliminary study

In this study maltose, maltotriose and maltotetraose were for the first time, coupled to 4,4′-methylenedianiline (MDA). The aim of this preliminary work was to test the feasibility of oligo- and polysaccharide coupling to MDA and the characterization of the coupling products by high resolution mass spectrometry (MS). (+) nanoESI in combination with a quadrupole time of flight (QTOF) MS in full scan (MS) and MS/MS was optimized first on underivatized maltose, maltotriose and maltotetraose. The optimal screening and sequencing conditions were further applied to the MDA-functionalized oligosaccharides. The obtained results revealed a straightforward MS detection of the functionalized oligomers, high sequence coverage and a fragmentation pathway with the formation of B and Y ions as well as the complementary C and Z ions along with a typical cleavage of the aglycon. We consider that this methodology is fully applicable also to polydisperse mixtures of long chain polysaccharides, which due to the large number of components and their size require a systematic method of development and testing.      

Multielemental characterization of honey using inductively coupled plasma mass spectrometry fused with chemometrics

Honey is considered a desirable ingredient in a range of different foodstuffs because of its nutrient and therapeutic effect. The honey characteristics mainly depend on the type of vegetation visited by the bees and the climatic conditions in which the plants are growing. Therefore, the purity, floral and geographical origin and authenticity are important factors influencing the overall perception of honey and honey‐based products in terms of quality and price. An important parameter in this picture is the elemental composition of honey because it can be linked with the floral type of honey, floral plant density and the botanical origin of nectar and pollens. In this work, the concentration range variation of 18 elements (Al, As, Ba, Ca, Cd, Co, Cr, Cu, Mg, Mn, Na, Ni, K, Pb, Sr, Ti, V and Zn) was investigated in four varieties of honey (linden, acacia, rape, and sunflower) originating from Romania, because the elemental profile of honey may give important information to differentiate its geographical and varietal origin for authenticity purpose. All the determinations were carried out by inductively coupled plasma quadrupole mass spectrometry (ICP‐Q‐MS). The most abundant minerals decreased in the following order: K > Ca > Mg > Na, having the mean values of 248.70, 59.97, 20.54 and 11.92 mg kg^?1, respectively. The mineral content marks the differences in honey samples from different botanical origin and can be used as a tool for authentication purposes and also extends its applicability to assess the traceability of honey. Analysis of variance showed the preliminary relationships between the elements and samples. Further, the discrimination between different studied honey samples was achieved by principal component analysis (PCA). The multivariate analysis of the data allowed us to separate the honey samples into distinct groups according to their macroelement and microelement composition, emphasizing the origin of variation of element concentrations by honey type. Therefore, this approach might be potentially useful for the control of honey quality, origin or authenticity, and even to use the honey as environmental tracer.     

Stochastic Control for Mean-Field Stochastic Partial Differential Equations with Jumps

We study optimal control for mean-field stochastic partial differential equations (stochastic evolution equations) driven by a Brownian motion and an independent Poisson random measure, in case of partial information control. One important novelty of our problem is represented by the introduction of general mean-field operators, acting on both the controlled state process and the control process. We first formulate a sufficient and a necessary maximum principle for this type of control. We then prove the existence and uniqueness of the solution of such general forward and backward mean-field stochastic partial differential equations. We apply our results to find the explicit optimal control for an optimal harvesting problem.