Solubilization of silica nanoparticles in alkanes and poly(α-olefin)s by functionalized polyisobutylene oligomers

Covalent and noncovalent chemical methods that use oligomeric lipophilic agents to solubilize silica nanoparticles in heptane and poly(α-olefin) (EPAO) solvents are described. While only modest solubilization efficiencies are seen with an octadecyl group, a variety of terminally functionalized polyisobutylene (PIB) derivatives are more efficient. Both covalent and noncovalent chemistry was found to be effective. Covalent modification solubilized up to 34 wt% of silica nanoparticles (SiNPs) as stable solutions in heptane or PAOs. Noncovalent modification was however more effective, solubilizing up to 70% of SiNPs in heptane or PAOs. The most successful covalent approach used PIB oligomers containing terminal triethoxysilane groups to covalently modify SiNPs. Alternatively, SiNPs that were first functionalized with amine groups could be solubilized in heptane or PAOs with polyisobutylene containing sulfonic acid groups using acid–base chemistry. Studies of these and other solubilization chemistry was also carried out using fluorescent labels, studies that confirmed the gravimetric analyses of the heptane-solubilized SiNPs. Transmission electron microscopy of a PAO solution of these solutions showed that these SiNPs were present as small aggregates dispersed in the PAOs.     

Automated derivatization and analysis of malondialdehyde using column switching sample preparation HPLC with fluorescence detection

Analyte derivatization is advantageous for the analysis of malondialdehyde (MDA) as a biomarker of oxidative stress in biological samples. Conventionally, however, derivatization is time consuming, error-prone and has limited options for automation. We have addressed these challenges for the solid phase analytical derivatization of MDA from small volume tissue homogenate samples. A manual derivatization method was first developed using Amberlite XAD-2 (12 mg) as the solid phase. Subsequently an automated column switching process was developed that provided simultaneous derivatization and extraction of the MDA-DH hydrazone product on a cartridge packed with XAD-2, followed by quantitative elution of the product to an analytical LC column (Waters NovoPak C18, 3.9 x 150 mm). The LOD was 0.02 microg/mL and recovery was quantitative. The method was linear (r(2) >0.999) with precision < 5% from the LOQ (0.06 microg/mL) to at least 35 microg/mL. The method was successfully applied to the analysis of small volume (30 microL) mouse tissue homogenate samples. Endogenous levels of MDA in the tissues ranged from 20 to 40 nmol/g tissue (ca. 0.1-0.2 microg/mL homogenate). Compared to conventional MDA analyses, the current method has advantages in automation, selectivity, precision and sensitivity for analysis from very small sample volumes.     

Influence of micromixer characteristics on polydispersity index of block copolymers synthesized in continuous flow microreactors

The influence of interdigital multilamination micromixer characteristics on monomer conversions, molecular weights and especially on the polydispersity index of block copolymers synthesized continuously in two microtube reactors is investigated. The micromixers are used to mix, before copolymerization, a polymer solution with different viscosities and the second monomer. Different geometries of micromixer (number of microchannels, characteristic lengths) have been studied. It was found that polydispersity indices of the copolymers follow a linear relationship with the Reynolds number in the micromixer, represented by a form factor. Thus, beside the operating conditions (nature of the first block and comonomer flow rate), the choice of the micromixer geometry and dimension is essential to control the copolymerization in terms of molecular weights and polydispersity indices. This linear correlation allows the prediction of copolymer features. It can also be a new method to optimize existing micromixers or design other geometries so that mixing could be more efficient.     

X‐Tream quality assurance in synchrotron X‐ray microbeam radiation therapy

Microbeam radiation therapy (MRT) is a novel irradiation technique for brain tumours treatment currently under development at the European Synchrotron Radiation Facility in Grenoble, France. The technique is based on the spatial fractionation of a highly brilliant synchrotron X‐ray beam into an array of microbeams using a multi‐slit collimator (MSC). After promising pre‐clinical results, veterinary trials have recently commenced requiring the need for dedicated quality assurance (QA) procedures. The quality of MRT treatment demands reproducible and precise spatial fractionation of the incoming synchrotron beam. The intensity profile of the microbeams must also be quickly and quantitatively characterized prior to each treatment for comparison with that used for input to the dose‐planning calculations. The Centre for Medical Radiation Physics (University of Wollongong, Australia) has developed an X‐ray treatment monitoring system (X‐Tream) which incorporates a high‐spatial‐resolution silicon strip detector (SSD) specifically designed for MRT. In‐air measurements of the horizontal profile of the intrinsic microbeam X‐ray field in order to determine the relative intensity of each microbeam are presented, and the alignment of the MSC is also assessed. The results show that the SSD is able to resolve individual microbeams which therefore provides invaluable QA of the horizontal field size and microbeam number and shape. They also demonstrate that the SSD used in the X‐Tream system is very sensitive to any small misalignment of the MSC. In order to allow as rapid QA as possible, a fast alignment procedure of the SSD based on X‐ray imaging with a low‐intensity low‐energy beam has been developed and is presented in this publication.     

Dynamics and stability of nanostructures on metal surfaces

Ultrathin metal films consisting of two-dimensional clusters are typically unstable: the cluster ensemble has the tendency to reduce its total free energy via Ostwald ripening or dynamic coalescence of mobile clusters. In this paper we give an overview of recent model experiments addressing these coarsening mechanisms. The experiments have been performed using STM on ensembles consisting of adatom or vacancy clusters with typical diameters in the nanometer range on fcc(111)-metal surfaces. Agreement with and deviations from conventional theories are discussed. Received: 29 March 1999 / Accepted: 17 August 1999 / Published online: 30 September 1999     

Development of an impregnated reagent and automation of solid-phase analytical derivatization for carbonyls: proof of principle

This study undertakes reduction of scale and automation of a solid-phase analytical derivatization of carbonyls with 2,4-dinitrophenylhyrazine on a styrene-divinylbenzene resin (XAD-2). Three processes are tested. In the batch process, an aqueous phase consisting of 50 microL of sample and 150 microL of reagent solution is contacted with 6 mg XAD-2 by shaking. An impregnated reagent consisting of 2,4-dinitrophenylhydrazine hydrochloride (DNPH) deposited on XAD-2 enables two additional processes. In-vial derivatization with an impregnated reagent requires shaking 50 microL of sample with 6 mg of the impregnated reagent and reduced the reaction time from 10 to 5 min. The third process involves packing impregnated reagent a mini-column and flowing 50 microL of sample through under positive pressure supplied by a Harvard Pump. This reduces sample preparation time to 1 min. Studies are conducted with worst-case model analytes: butanone, 2-pentanone, and malonyldialdehyde. The carbonyl of the two ketones is hindered, and, thus, these two compounds react very slowly with DNPH in aqueous solution. Malonyldialdehyde is highly water soluble, and it does not react in aqueous phase but also would not sorb onto XAD-2 for reaction. Nevertheless, derivatization/extraction of all model compounds any of the three procedures result in reproducible and high yields.     

Photosensitizers derived from 132-oxo-methyl pyropheophorbide-a: enhanced effect of indium(III) as a central metal in in vitro and in vivo photosensitizing efficacy

The effects of an additional keto group on absorption wavelength and the corresponding metal complexes Zn(II), Cu(II) In(III) on singlet oxygen production and photodynamic efficacy were examined among the alkyl ether analogs of pyropheophorbide-a. For the preparation of the desired photosensitizers, the methyl 13(2)-oxo-pyropheophorbide-a obtained by reacting methyl pyropheophorbide-a with aqueous LiOH-THF was converted into a series of alkyl ether analogs. These compounds were evaluated for photophysical properties and in vitro (by means of the MTT assay and intracellular localization in RIF cells) and in vivo (in C3H mice implanted with RIF tumors) photosensitizing efficacy. Among the alkyl ether derivatives, the methyl 3-decyloxyethyl-3-devinyl-13(2)-oxo-pyropheophorbide-a was found to be most effective and the insertion of In(III) into this analog further enhanced its in vitro and in vivo photosensitizing efficacy. Fluorescence microscopy showed that, in contrast to the hexyl and dodecyl ether derivatives of HPPH (which localize in mitochondria and lysosomes, respectively), the diketo-analogs and their In(III) complexes localized in Golgi bodies. The preliminary in vitro and in vivo results suggest that, in both free-base and metalated analogs, the introduction of an additional keto group at the five-member exocyclic ring in pyropheophorbide-a diminishes its photosensitizing efficacy. This may be due to a shift in subcellular localization from mitochondria to the Golgi bodies. The further introduction of In(III) enhances photoactivity, but not by shifting the localization of the photosensitizer.     

Effect of free radical oxidation on the structure and function of plasma fibrin-stabilizing factor

Plasma fibrin-stabilizing factor (pFXIII) is a heterosubunit protein, the main function of which is the covalent stabilization of the fibrin matrix. This paper examines the ozone-induced free radical oxidation of plasma fibrin-stabilizing factor at different stages of its enzymatic activation. Electrophoretic data on the accumulation of γ-γ-dimers and α-polymers in the formation of stabilized fibrin suggests that a reduction in the enzymatic activity of FXIIIa is largely dependent on the stage of activation of pFXIII at which the oxidation is carried out. The results of UV, IR, and Raman spectroscopy measurements suggests that the oxidation of the amino acid residues of the polypeptide chains of pFXIII primarily affects cyclic, cysteine, and cystine groups and leads to the formation of oxidation products, being accompanied by the disruption of the protein secondary structure. Dynamic light scattering measurements revealed a loosening of the protein structure in the course of free radical oxidation. Spin label EPR spectroscopy data are suggestive of a change in the pFXIII conformation as a result of oxidative modification. Possible reasons for the different sensitivity of pFXIII to oxidative modification in the process of enzymatic activation are discussed. It is presumed that FXIII-B₂ regulatory subunits function as scavenges of reactive oxygen species, thereby protecting FXIII-A₂ catalytic subunits from oxidation.