Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Comments on ‘A New Model for Viscous Dissipation in Porous Media Across a Range of Permeability Values’, Transport in Porous Media 53, 117–122, 2003

Transport in Porous Media -     

Properties of backscattered particles produced by protons of energy above 1 TeV in an iron absorber

Backscattered-particle production is studied by means of a detailed simulation of cascade processes in a dense medium. The energy dependence of the albedo and the spatial and angular distributions of various components of this flux are analyzed.     

Resonant destabilization of phonon microwave stimulated emission in an acoustic quantum oscillator (phaser) with periodically modulated pumping

Two qualitatively different types of resonant destabilization of phonon stimulated emission (SE) are discovered in experiments where a 9-GHz multimode ruby laser is periodically modulated (the electromagnetic pump frequency is 23 GHz). In the case of deep pump modulation at low modulation frequencies (ω=70–200 Hz, where ω_m is the modulation frequency), a fast random alternation of microwave phonon SE modes is observed. This destabilization range corresponds to relaxation resonance in optical lasers. Outside the relaxation resonance range (at ω_m≈10 Hz), the other type of resonant destabilization of stationary phonon SE is observed. This destabilization shows up as very slow regular self-detunings of the microwave SE spectra. The period of such self-organized motions depends significantly on ω_m and changes by several orders of magnitude when ω_m varies within several percent. The second type of SE resonant destabilization is explained in terms of antiphase energy exchange between modes in a modulated phaser.     

Spatial deterministic chaos in optical systems and methods of its modeling

The phenomenon of spatial deterministic chaos is described. A transition from an ordinary differential equation to a discrete map is justified for modeling of the chaos. Methods of studying the chaos dynamics in this model are suggested. It is established how the physical properties of a nonlinear ring interferometer influence the structure of charts of the Lyapunov exponents. The approaches developed in the present study allow an optical cryptosystem to be optimized.__________Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 65–71, December, 2004.     

Measurement uncertainty of selenium determination in the reference material Seronorm Trace Elements Serum by hydride generation atomic fluorescence spectrometry

 An analytical result is not considered to be complete without a statement of the measurement uncertainty associated with it. Evaluation of measurement uncertainty is therefore an essential part of every determination. In the present study the measurement uncertainty of the result of determination of selenium in the reference material Seronorm Trace Elements Serum was studied. The combination of a digestion procedure using sulfuric acid, V₂O₅ in H₂SO₄ and hydrogen peroxide and the continuous flow approach of hydride generation atomic fluorescence spectrometry (HG-AFS) detection was used for selenium determination. The total uncertainty budget was calculated with the help of the GUM Workbench program, in which computations follow the rules of the ’ISO guide to the expression of uncertainty in measurement’. The major sources of uncertainty were found to be due to the recovery of the procedure, measurement of peak heights and the purity of Na₂SeO₃. A selenium mass fraction of 77.1±4.8 ng/g (with a coverage factor of 2.1, 95% probability) was determined, which is comparable with the recommended value of 80 ng/g. Received: 13 September 2002 Accepted: 23 December 2002 Acknowledgements We would like to thank Tinkara Buˇcar, B.Sc. for useful discussions and the IAEA Vienna, for financial support of the project 11553/RO. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to V. Stibilj     

Experience of Control over Process of Chemical-Informational Synthesis

Conditions under which various kinds of carbon nanoparticles are obtained by thermal oxidative conversion of methane in chlorine in the temperature range 20-500°C were studied. The influence exerted by conditions of synthesis of nanodispersed carbon on the properties of its samples was analyzed.     

A Note about the Appearance of Non-Hyperbolic Solutions in a Mechanical Pendulum System

The investigation of the behavior of a nonlinear system consists in theanalysis of different stages of its motion, where the complexity varieswith the proximity of a resonance region. Near this region the stabilitydomain of the system undergoes sudden changes due basically tocompetition and interaction between periodic and saddle solutions insidethe phase portrait, leading to the occurrence of the most differentphenomena. Depending of the domain of the chosen control parameter,these events can reveal interesting geometric features of the system sothat the phase portrait is not capable to express all them, since theprojection of these solutions on the two-dimensional surface can hidesome aspects of these events. In this work we will investigate thenumerical solutions of a particular pendulum system close to a secondaryresonance region, where we vary the control parameter in a restrictdomain in order to draw a preliminary identification about what happenswith this system. This domain includes the appearance of non-hyperbolicsolutions where the basin of attraction in the center of the phaseportrait diminishes considerably, almost disappearing, and afterwardsits size increases with the direction of motion inverted. Thisphenomenon delimits a boundary between low and high frequency of theexternal excitation.