Impact of pinning of the triple contact line on electrowetting performance

Pinning of the triple contact line adversely affects electrowetting on dielectric. Electrowetting response of substrates with contact angle hysteresis ranging from 1° to 30° has been characterized, and the results are interpreted within the framework of electromechanics corrected for pinning. The relationship between contact angle hysteresis, threshold potential for liquid actuation, and electrowetting hysteresis is quantified. Our results demonstrate that a modified electrowetting equation, based on balance of forces (including the pinning forces) acting on the triple contact line and on the drop, describes the electrowetting response of substrates with significant contact angle hysteresis. Finally, the surface properties of PDMS Sylgard 184 were found to be influenced by the electric field.     

Preparation and characterization of Bi0.75Er0.25O1.5 and Bi0.75Er0.125Y0.125O1.5 nanocrystalline ceramics by SPS

Nanopowders of Bi_0.75Er_0.25O_1.5 and Bi_0.75Er_0.125Y_0.125O_1.5 were prepared by a reverse titration chemical coprecipitation method under controlled pH conditions. After calcination at 500 °C for 3 h, powders with grain size in the order of 10 nm were obtained. In order to keep the nanosize of grains, these powders were densified by spark plasma sintering. Samples with relative density higher than 96% were prepared in only 10 min up to 500 °C with an average grain size of 15 and 11 nm for Bi_0.75Er_0.25O_1.5 and Bi_0.75Er_0.125Y_0.125O_1.5, respectively. Impedance spectroscopy revealed slightly higher conductivity for the Bi_0.75Er_0.125Y_0.125O_1.5 composition compared to Bi_0.75Er_0.25O_1.5 nanoceramic, but performances remained lower than the corresponding Bi_0.75Er_0.25O_1.5 microcrystalline sample. However, mechanical properties of both nanocrystalline ceramics are improved when compared to microcrystalline samples.     

Violet-to-blue tunable emission of aryl-substituted dispirofluorene-indenofluorene isomers by conformationally-controllable intramolecular excimer formation

Two series of DiSpiroFluorene-IndenoFluorene (DSF-IF) positional isomers, namely dispiro[2,7-diarylfluorene-9',6,9',12-indeno[1,2-b]fluorenes], (1,2-b)-DSF-IFs 1 and dispiro[2,7-diarylfluorene-9',6,9',12-indeno[2,1-a]fluorenes], (2,1-a)-DSF-IFs 2 have been synthesized. These violet-to-blue fluorescent emitters possess a 3π-2spiro architecture, which combines via two spiro links two different indenofluorene cores, that is, (1,2-b)-IF or (2,1-a)-IF and 2,7-substituted-diaryl-fluorene units. Due to their different geometric profiles, the two families of positional isomers present drastically different properties. The marked difference observed between the properties of (1,2-b)-DSF-IF (1) and (2,1-a)-DSF-IF (2) is discussed in terms of intramolecular π-π interactions occurring in (2,1-a)-DSF-IF (2) leading to conformationally-controllable intramolecular excimer formation. Indeed, the original geometry of the (2,1-a)-DSF-IF (2) family, with face-to-face "aryl-fluorene-aryl" moieties, leads to remarkable excimer emission through intramolecular π-π interactions in the excited state. Furthermore, the emission wavelengths can be gradually modulated by the control of the steric hindrance between the adjacent substituted phenyl rings. Thus, through a comparative and detailed study of the (1)H NMR, electrochemical and photophysical properties of DSF-IFs 1 and 2, we have evidenced the intramolecular π-π interactions occurring between the two "aryl-fluorene-aryl" moieties in the ground state and in the excited state. These properties have been finally correlated to the spectacular conformational change modeled by density functional theory (DFT) calculations. Indeed, the two "aryl-fluorene-aryl" moieties switch from a staggered conformation in the ground state to an eclipsed conformation in the first excited state.     

Electrochemical behaviour and voltammetric sensitivity at arrays of nanoscale interfaces between immiscible liquids

Arrays of nanoscale interfaces between immiscible electrolyte solutions were formed using silicon nitride nanopore array membranes. Nanopores in the range from 75 nm radius down to 17 nm radius were used to form the nano-interfaces. It was found that the liquid organic phase electrolyte solution filled the pores so that inlaid nano-interfaces were formed with the aqueous phase. Cyclic voltammetry at these nano-interface arrays demonstrated steady-state behaviour at the larger interfaces but the voltammetric wave-shape became progressively worse as the interface size decreased. It was found that the ion transfer currents were ca. 50% of those expected based on theoretical calculations, which is attributed to overlap of diffusion zones at adjacent nano-interfaces. Here, the separation between adjacent nano-interfaces was 20-times the interface radius. The analytical sensitivity for ion transfer from the aqueous to the 1,6-dichlorohexane organic phase was estimated from calibration plots of current density versus concentration of aqueous tetraethylammonium cation. The sensitivity was in the range of 65 μA cm(-2) μM(-1) (at 75 nm radius interfaces) to 265 μA cm(-2) μM(-1) (at 17 nm radius interfaces). The sensitivity depended directly on the inverse of the nano-interface radius, implying that smaller interfaces will provide better sensitivity, due to the enhanced flux of analyte arising from convergent diffusion to smaller electrochemical interfaces.     

Polymer microfluidic chips for electrochemical and biochemical analyses

Our recent developments concerning the fabrication of polymer microchips and their applications for biochemical analyses are reviewed. We first describe two methods of fabrication of polymer microfluidic chips, namely UV-laser photoablation and plasma etching that are well suited for the prototyping and mass fabrication of microchannel networks with integrated microelectrodes. These microanalytical systems can be coupled with various detection means including mass spectrometry, and their applications in capillary electrophoresis are presented here. We also present how UV laser photoablation can be used for the patterning of biomolecules on polymer surfaces for generating two-dimensional arrays of microspots to carry out affinity assays. Finally, the use of the microchips for the development of fast affinity and immunological assays with electrochemical detection is presented, demonstrating the potential of these polymer microchips for medical diagnostics and drug discovery.     

Spectroscopic and electrochemical characterization of an aqua ligand exchange and oxidatively induced deprotonation in diiron complexes

Reaction of the unsymmetrical phenol ligand 2-((bis(2-pyridylmethyl)amino)methyl)-6-(((2-pyridylmethyl)benzylamino)methyl)-4-methylphenol (HL-Bn) or its 2,6-dichlorobenzyl analogue (HL-BnCl(2)) with Fe(H(2)O)(6)(ClO(4))(2) in the presence of disodium m-phenylenedipropionate (Na(2)(mpdp)) followed by exposure to atmosphere affords the diiron(II,III) complexes [Fe(2)(L-Bn)(mpdp)(H(2)O)](ClO(4))(2) and [Fe(2)(L-BnCl(2))(mpdp)(CH(3)OH)](ClO(4))(2), respectively. The latter complex has been characterized by X-ray crystallography. It crystallizes in the monoclinic system, space group P2(1)/n, with a = 13.3095(14) A, b = 20.1073(19) A, c = 19.4997(19) A, alpha = 90 degrees, beta = 94.471(2) degrees, gamma = 90 degrees, V = 5202.6(9) A(3), and Z = 4. The structure of the compound is very similar to that of [Fe(2)(L-Bn)(mpdp)(H(2)O)](BPh(4))(2) determined earlier, except for the replacement of a water by a methanol on the ferrous site. Magnetic measurements of [Fe(2)(L-Bn)(mpdp)(H(2)O)](BPh(4))(2) reveal that the two high-spin Fe ions are moderately antiferromagnetically coupled (J = -3.2(2) cm(-)(1)). Upon dissolution in acetonitrile the terminal ligand on the ferrous site is replaced by a solvent molecule. The acetonitrile-water exchange has been investigated by various spectroscopic techniques (UV-visible, NMR, M?ssbauer) and electrochemistry. The substitution of acetonitrile by water is clearly evidenced by M?ssbauer spectroscopy by a reduction of the quadrupole splitting value from 3.14 to 2.41 mm/s. In addition, it causes a 210 mV downshift of the oxidation potential of the ferrous site and a similar reduction of the stability domain of the mixed-valence state. Exhaustive electrolysis of a solution of [Fe(2)(L-Bn)(mpdp)(H(2)O)](2+) shows that the aqua diferric species is not stable and undergoes a chemical reaction which can be partly reversed by reduction to the mixed-valent state. This and other electrochemical observations suggest that upon oxidation of the diiron center to the diferric state the aqua ligand is deprotonated to a hydroxo. This hypothesis is supported by M?ssbauer spectroscopy. Indeed, this species possesses a large quadrupole splitting value (DeltaE(Q) >or= 1.0 mm.s(-)(1)) similar to that of analogous complexes with a terminal phenolate ligand. This study illustrates the drastic effects of aqua ligand exchange and deprotonation on the electronic structure and redox potentials of diiron centers.     

The design and synthesis of novel IBiox N-heterocyclic carbene ligands derived from substituted amino-indanols

A synthetic route towards a number of novel IBiox N-heterocyclic carbene (NHC) ligands has been developed. The resulting ligands have restricted flexibility and high steric demand. Preliminary studies have shown these ligands to give high levels of asymmetric induction in the copper-free allylic alkylation of cinnamyl bromide.     

Sodium diffusion through amorphous silica surfaces: a molecular dynamics study

We have studied the diffusion inside the silica network of sodium atoms initially located outside the surfaces of an amorphous silica film. We have focused our attention on structural and dynamical quantities, and we have found that the local environment of the sodium atoms is close to the local environment of the sodium atoms inside bulk sodo-silicate glasses obtained by quench. This is in agreement with recent experimental results.     

A 2D reversed-phase × ion-pair reversed-phase HPLC-MALDI TOF/TOF-MS approach for shotgun proteome analysis

The separation of complex peptide mixtures in shotgun proteome analysis using a 2D separation scheme encompassing reversed-phase × ion-pair reversed-phase (IP-RP) liquid chromatography coupled online to electrospray ion trap mass spectrometry (MS) has been shown earlier to be superior in terms of separation efficiency and technical robustness compared to the classically used separation scheme encompassing strong cation exchange × IP-RP-chromatography in shotgun proteome analysis. In the present study, this novel separation scheme was coupled offline to matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF-MS for the analysis of the same sample, a tryptic digest of the cytosolic proteome of the bacterium Corynebacterium glutamicum. Compared to the earlier study, the MALDI-based platform led to a significantly increased number of peptides (7,416 vs. 2,709) and proteins (1,208 vs. 468, without single peptide-based identifications), respectively. This represents the majority of all predicted cytosolic proteins in C. glutamicum. The high proteome coverage, as well as the large number of low-abundant proteins identified with this improved analytical platform, pave the way for new biological studies. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.