Epoxy‐functionalized,low‐glass‐transition‐temperature latex. II. Interdiffusion versus crosslinking in the presence of a diamine

This article describes the results of experiments examining the competition between the polymer diffusion rate and the crosslinking rate in low‐glass‐transition‐temperature, epoxy‐containing latex films in the presence of a diamine. We examined films formed from donor‐ and acceptor‐labeled poly(butyl acrylate‐co‐methyl methacrylate‐co‐glycidyl methacrylate) copolymer latex and studied the influence of several parameters on the growth rate of gel content and the rate of polymer diffusion. These factors include the molecular weight of the latex polymer, the presence or absence of a diamine crosslinking agent, and the cure protocol. The results were compared to the predictions of a recent theory of the competition between crosslinking and polymer diffusion across interfaces. In the initially formed films, polymer diffusion occurs more rapidly than the chemical reaction rate. Therefore, these films fall into the fast‐diffusion category of this model. In our system (unlike in the model), the latex polymer has a broad distribution of molecular weights and a distribution of diffusivities. The shortest chains contribute to the early time diffusion that we measure. At later stages of our experiment, slower diffusing species contribute to the signal that we measure. The diffusion time decreases substantially, and we observe a crossover to a regime in which the chemical reaction dominates. The increases in chain branching and gel formation bring polymer diffusion to a halt. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4098–4116, 2002     

A three-way synergy of triple-modified Bi2WO6/Ag/N-TiO2 nanojunction film for enhanced photogenerated charges utilization

We demonstrate a general strategy to prepare Bi(2)WO(6)/Ag/N-TiO(2) film with double visible-light-active components bridged by Ag nanoparticles as an electron shuttle, which exhibits enhanced photocatalytic activity and photoelectrochemical performance under visible light.     

Effect of sequence distribution on the isothermal crystallization kinetics and successive self-nucleation and annealing (SSA) behavior of poly(ε-caprolactone-co-ε-caprolactam) copolymers

Two types of miscible poly(ε-caprolactone-co-ε-caprolactam) copolymers were studied. In both cases catalyzed hydrolytic ring-opening polymerization was employed. For the first type, the comonomers were added simultaneously to obtain random copolymers. For the second type, the comonomers were added sequentially to obtain block copolymers. Successive self-nucleation and annealing (SSA) and isothermal crystallization studies were performed to both types of copolymers. The SSA results reflect the differences in molecular microstructure: block versus random copolymers. In a wide composition range only the polycaprolactam sequences were capable of crystallization in the random copolymers. Avrami indexes of approximately 3-4 were obtained corresponding to the spherulitic crystallization of these units within the copolymers. The block copolymer samples experienced a relatively small reduction of crystallization kinetics with composition, and this was attributed to the dilution effect caused by the miscible non-crystalline polycaprolactone units. On the other hand, for the random copolymers, the rate of crystallization strongly increased with polycaprolactam content while the energy barrier for secondary nucleation decreased exponentially. The comparison between miscible block and random copolymers provides a unique opportunity to distinguish the dilution effect of the polycaprolactone units (a moderate effect) on the isothermal crystallization and melting of the polyamide phase from the molecular microstructural effect in the random copolymers case (a dramatically strong effect), where the polycaprolactam sequences are interrupted statistically by polycaprolactone sequences.     

Triflic anhydride mediated cyclization of 5-hydroxy-substituted pyrrolidinones for the preparation of alpha-trifluoromethylsulfonamido furans

The reaction of alpha-angelica lactone with alkylamines under aqueous conditions afforded 5-hydroxy-5-methylpyrrolidinones in high yield. When the reaction was carried out under anhydrous conditions, the only products obtained were the corresponding 4-oxopentanoic acid amides. Treatment of either class of compound with triflic anhydride (Tf(2)O) in pyridine resulted in the formation of various substituted sulfonamidofurans. The suggested mechanism involves initial formation of an iminium ion which is subsequently transformed into a transient imino triflate. Cyclization of the highly electrophilic imine onto the oxygen atom of the adjacent carbonyl group generates an imino dihydrofuran intermediate. This species reacts further with another equivalent of Tf(2)O to give the observed product. The nature of the Lewis acid used was found to affect the outcome of the cyclization reaction. In certain cases, the sulfonamide furan was utilized as a cycloaddition substrate for the synthesis of indolines and related heterocyclic systems.     

Simultaneous determination of DTPA,EDTA, and NTA by capillary electrophoresis after complexation with copper

We present a method for simultaneous determination of the aminopolycarboxylic acids DTPA, EDTA and NTA in dishwashing detergents, paper mill waters, and natural waters by capillary electrophoresis (CE). The complexing agents were examined as their copper(II) complexes and separated by conventional CE with reversed polarity of the applied voltage. The optimum separation conditions were established by varying the pH and phosphate and tetradecyltrimethylammonium bromide (TTAB) concentrations in the run buffer. The separations were carried out in a fused-silica capillary (61 cm×75 m i.d.) filled with phosphate buffer (80 mmol L^–1, TTAB concentration 0.5 mmol L^–1, pH 7.1, voltage –20 kV) using direct UV detection at 191 and 254 nm. With this CE method all the peaks in the electropherograms were properly separated, the calibration plots gave good correlation coefficients and all three complexing agents could be detected in less than 4 min. Linear calibration plots were obtained for CuDTPA, CuEDTA and CuNTA; limits of detection were 0.03 mmol L^–1 for all complexing agents and recoveries for all tested samples were within the range 104±7%. Results obtained from dishwashing detergent samples were found to be reliable and comparable with those from HPLC (R²=0.989) and UV–Vis (R²=0.985) methods.     

Visible light-induced charge storage, on-demand release and self-photorechargeability of WO3 film

Tungsten oxide (WO(3)) electrodes subjected to a positive bias are self-photorecharged with alkali cations in the electrolyte during visible light illumination. Upon photoexcitation, part of the photogenerated charges generated by WO(3) is stabilized by the cations and stored in situ within the WO(3) framework. This light-induced storage of charges is subsequently utilized in dark conditions in an on-demand manner and is able to be recharged in the successive illumination cycles. The amount of charges stored is shown to be dependent on the cation ionic radii and the presence of these intercalated cations is verified by X-ray diffraction (XRD) and inductively coupled plasma mass spectroscopy (ICP-MS). This self-photorecharge and on-demand charge-release phenomena demonstrate the ability of WO(3) to supply photoexcited charges under dark condition in a photoelectrochemical reaction with greater flexibility.     

PHOTO-CIDNP DETECTION OF PYRIMIDINE DIMER RADICAL CATIONS IN ANTHRAQUINONESULFONATE- SENSITIZED SPLITTING

Anthraquinone-2-sulfonate (AQS) photosensitizes pyrimidine dimer splitting. Electron abstraction from the dimer is thought to induce dimer splitting, but direct evidence for the existence and intermediacy of dimer radical cations has been lacking. By employing photochemically induced dynamic nuclear polarization, we have found emission signals in the NMR spectra of dimers upon photolysis of dimers in the presence of anthraquinone-2-sulfonate. The two dimers employed were cis, syn-thymine dimer in which the N(1)-positions were linked by a three-carbon bridge and the N(3), N(3')-dimethyl derivative of that compound. The anthraquinone-2-sulfonate sensitized photochemically induced dynamic nuclear polarization spectrum of the methylated derivative exhibited an emission signal from the dimer-C(6) hydrogens. This result implied the existence of a dimer radical cation (mD+.) formed by electron abstraction by excited anthraquinone-2-sulfonate and nuclear spin sorting within a solvent caged radical ion pair [mD+. AQS-.]. Product pyrimidine photochemically induced dynamic nuclear polarization signals were also seen [enhanced absorption by C(6)-hydrogens and emission by C(5)-methyl groups]. Nuclear spin polarization in the product resulted from spin sorting in one or more of its precursors, including mD+. The results support the conclusion that dimer radical cations not only exist but are intermediates in the photosensitized splitting of pyrimidine dimers by anthraquinonesulfonate.     

PHOTOSENSITIZATION OF PYRIMIDINE DIMER SPLITTING BY A COVALENTLY BOUND INDOLE

Abstract— Photosensitized pyrimidine dimer splitting characterizes the enzymatic process of DNA repair by the DNA photolyases. Possible pathways for the enzymatic reaction include photoinduced electron transfer to or from the dimer. To study the mechanistic photochemistry of splitting by a sensitizer representative of excited state electron donors, a compound in which an indole is covalently linked to a pyrimidine dimer has been synthesized. This compound allowed the quantitative measurement of the quantum efficiency of dimer splitting to be made without uncertainties resulting from lack of extensive preassociation of the unlinked dimer and sensitizer free in solution. Irradiation of the compound with light at wavelengths absorbed only by the indolyl group (approximately 280 nm) resulted in splitting of the attached dimer. The quantum yield of splitting of the linked system dissolved in N₂0-saturated aqueous solution was found to be 0.04 ± 0.01. The fluorescence typical of indoles was almost totally quenched by the attached dimer. A splitting mechanism in which an electron is efficiently transferred intramolecularly from photoexcited indole to ground state dimer has been formulated. The surprisingly low quantum yield of splitting has been attributed to inefficient splitting of the resulting dimer radical anion. Insights gained from this study have important mechanistic implications for the analogous reaction effected by the DNA photolyases.