Development of Magnesium Anode-Based Transient Primary Batteries

Biodegradable primary batteries, also known as transient batteries, are essential to realize autonomous biodegradable electronic devices with high performance and advanced functionality. In this work, magnesium, copper, iron, and zinc – metals that exist as trace elements in the human body – were tested as materials for biomedical transient electronic devices. Different full cell combinations of Mg and X (where X = Cu, Fe, and Zn and the anodized form of the metals) with phosphate buffered saline (PBS) as electrolyte were studied. To form the cathodes, metal foils were anodized galvanostatically at a current density of 2.0 mA cm⁻² for 30 mins. Electrochemical measurements were then conducted for each electrode combination to evaluate full cell battery performance. Results showed that the Mg−Cu_anodized chemistry has the highest power density at 0.99 mW/cm². Nominal operating voltages of 1.26 V for the first 0.50 h and 0.63 V for the next 3.7 h were observed for Mg−Cu_anodized which was discharged at a current density of 0.70 mA cm⁻². Among the materials tested, Mg−Cu_anodized exhibited the best discharge performance with an average specific capacity of 2.94 mAh cm⁻², which is comparable to previous reports on transient batteries.     

Dynamic properties of soy globulin adsorbed films at the air-water interface

In this paper we present surface dilatational properties of soy globulins (beta-conglycinin, glycinin, and reduced glycinin with 10 mM of dithiothreitol (DTT)) adsorbed onto the air-water interface, as a function of adsorption time. The experiments were performed at constant temperature (20 degrees C), pH (8.0), and ionic strength (0.05 M). The surface rheological parameters were measured as a function of protein concentration (ranging from 1 to 1x10(-3)% wt/wt). We found that the surface dilatational modulus, E, increases, and the phase angle, phi, decreases with time, theta, which may be associated with protein adsorption. These phenomena have been related to protein adsorption, unfolding, and/or protein-protein interactions (at long-term adsorption) as a function of protein concentration in solution. From a rheological point of view, the surface viscoelastic characteristics of soy globulin films adsorbed at the air-water interface are practically elastic. The main conclusion is that the dilatational properties of the adsorbed films depend on the molecular structure of the protein.     

Triple quadrupole mass spectrometry as applied to flame diagnostics: study of the C2H4/N2O/Ar flame

A recently developed research apparatus for characterization of low-pressure premixed flames has been developed and was used to characterize the C₂H₄/N₂O/Ar flame at 20 torr. This instrument incorporates several diagnostic techniques in one apparatus so that individual techniques can be quantitatively compared and the usable detection range (both in terms of resolution and species detection) expanded. Results discussed in this report include mass analysis by triple quadrupole mass spectrometer and temperature measurement by thermocouple. Concentration profiles in the one-dimensional flame include CO, N₂, and C₂H₄, at nominal m/z 28 as well as CO₂ and N₂O at m/z 44.     

Positron spectroscopy analysis in metallocene propylene/1‐octadecene copolymers: Parameters dependence on monoclinic and mesomorphic polymorphs

Copolymers of propylene and 1‐octadecene synthesized by a metallocene catalyst were characterized by PALS, WAXD, DSC, and density measurements. The change in the sizes and the number density of free‐volume holes as a function of the 1‐octadecene content were compared to the master laws published for copolymers of propylene with α‐olefins of shorter lengths. It was found that the samples were separated into two groups. The first set of samples obeyed the master laws while the second group deviated. This behavior was explained by the difference in the copolymer structure. The WAXD analysis confirmed the separation as well. The deviation was explained as due to the mesomorphic crystalline structure of the second group of samples, in contrast to the monoclinic one for the first group, which was a result of the relatively fast cooling from the molten state and from the high comonomer molar content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1994–2002, 2010     

Alcohol‐Induced C−N Bond Cleavage of Cyclometalated N‐Heterocyclic Carbene Ligands with a Methylene‐Linked Pendant Imidazolium Ring

Reaction of the pentamethylcyclopentadienyl rhodium iodide dimer [Cp*RhI₂]₂ with 1,1′‐diphenyl‐3,3′‐methylenediimidazolium diiodide in non‐alcohol solvents, in the presence of base, led to the formation of bis‐carbene complex [Cp*Rh(bis‐NHC)I]I (bis‐NHC=1,1′‐diphenyl‐4,4′‐methylenediimidazoline‐5,5′‐diylidene). In contrast, when employing alcohols as the solvent in the same reaction, cleavage of a methylene C?N bond is observed, affording ether‐functionalized (cyclometalated) carbene ligands coordinated to the metal center and the concomitant formation of complexes with a coordinated imidazole ligand. Studies employing other 1,1′‐diimidazolium salts indicate that the cyclometalation step is a prerequisite for the activation/scission of the C?N bond and, based on additional experimental data, a S_N2 mechanism for the reaction is tentatively proposed.     

General approach for the stereocontrolled construction of the beta-lactam ring in amino acid-derived 4-alkyl-4-carboxy-2-azetidinones

The first general approach toward the asymmetric synthesis of 4-alkyl-4-carboxy-2-azetidinones derived from amino acids is described. The stereoselective construction of the beta-lactam ring was achieved through base-mediated intramolecular cyclization of the corresponding N(alpha)-chloroacetyl derivatives bearing (+)- or (-)-10-(N,N-dicyclohexylsulfamoyl)isoborneol as chiral auxiliary (ee up to 82%).     

Pairing fluctuations in trapped fermi gases

We examine the contribution of pairing fluctuations to the superfluid order parameter for harmonically trapped atomic Fermi gases in the BCS regime. In the limit of small systems we consider, both analytically and numerically, their space and temperature dependence. We predict a parity effect, i.e., that pairing fluctuations show a maximum or a minimum at the center of the trap, depending on the value of the last occupied shell being even or odd. We propose to detect pairing fluctuations by measuring the density-density correlation function after a ballistic expansion of the gas.