Two-Dimensional Supramolecular Polymerization of a Bis-Urea Macrocycle into a Brick-Like Hydrogen-Bonded Network

We report on a dendronized bis-urea macrocycle 1 self-assembling via a cooperative mechanism into two-dimensional (2D) nanosheets formed solely by alternated urea-urea hydrogen bonding interactions. The pure macrocycle self-assembles in bulk into one-dimensional liquid-crystalline columnar phases. In contrast, its self-assembly mode drastically changes in CHCl₃ or tetrachloroethane, leading to 2D hydrogen-bonded networks. Theoretical calculations, complemented by previously reported crystalline structures, indicate that the 2D assembly is formed by a brick-like hydrogen bonding pattern between bis-urea macrocycles. This assembly is promoted by the swelling of the trisdodecyloxyphenyl groups upon solvation, which frustrates, due to steric effects, the formation of the thermodynamically more stable columnar macrocycle stacks. This work proposes a new design strategy to access 2D supramolecular polymers by means of a single non-covalent interaction motif, which is of great interest for materials development.     

Copper acetylacetonate anchored onto amine-functionalised clays

Copper (II) acetylacetonate was immobilised directly onto two clays, laponite (Lap) and K10-montmorillonite (K10), and after their amine functionalisation with (3-aminopropyl)triethoxysilane (APTES). All the materials were characterised by nitrogen adsorption isotherms at -196 degrees C, elemental analysis, TG-DSC, XRD, and IR spectroscopy. The K10-based materials were also characterised by XPS. The APTES-functionalised K10 showed higher copper loading than K10, indicating that the clay functionalisation enhanced the complex immobilisation; on the contrary, in Lap-based materials higher metal content was obtained by direct complex anchoring, probably due to the delaminated nature of Lap which induced the particles aggregation on functionalisation with APTES. All the results pointed out that the Cu complex was anchored onto the amine-functionalised clays by Schiff condensation between the amine groups of anchored APTES and the carbonyl groups of the acetylacetonate ligand, whereas direct immobilisation proceeded mostly through interaction between the metal centre and the clay surface hydroxyl groups.     

533—Structure and transport properties of artificial bipolar lipid membranes

The membranes of thermophilic archaebacteria are characterized by the presence of unusual bipolar saturated isoprenoid lipids. In order to investigate their molecular arrangement in the membrane and a possible influence on transport properties, we studied black films made from lipids of Caldariella acidophila, one of the most thermophilic archaebacteria. Details on the kinetics of formation at various temperatures are presented.Capacitance, compressibility and valinomycin-induced conductance values are compared with the corresponding data for a glycerol-monooleate (GMO) bilayer. A very peculiar behavior is presented by the bipolar lipid films studied. In fact, the values of conductance are more than two orders of magnitude lower than those of a GMO bilayer, while the values of capacitance and compressibility do not depend appreciably on the solvent in which the lipid is dispersed (in contrast with a GMO bilayer, where there is a 100% change).The results are discussed in terms of a proposed model of a monolayer organization of bipolar lipids and of the unusual composition of the hydrophobic core of the membrane.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

Tautomeric conjugate acids of 2-aminopyrroles: effect of substituents, solvation and cosolute

The tautomeric preferences of the conjugated acids of 2-aminopyrrole derivatives have been examined both in the gas phase and in aqueous solution by using a combination of quantum mechanical, self-consistent reaction field and Monte Carlo–free-energy perturbation methods. The results show that the nature of substituents, the solvent and the presence of cosolute are relevant factors in modulating the relative stability between the tautomeric conjugate acids protonated at the heterocyclic ring and at the exocyclic amino nitrogen. Thus, attachment of electron-withdrawing groups to the ring, solvation in polar solvents, and the presence of negatively charged cosolutes tend to favor protonation at the exocyclic amino nitrogen. Nevertheless, none of these factors alone suffice to change the tautomeric preference for the ring-protonated forms. The results point out that the concerted occurrence of the three factors is necessary to shift the tautomeric preference towards the conjugated species protonated at the exocyclic nitrogen.Contribution to the Jacopo Tomasi Honorary Issue     

Adsorption of arsenic (V) from a water solution onto a surfactant-modified zeolite

In this study a surfactant-modified zeolite (SMZ) was prepared by adsorbing the cationic surfactant hexadecyltrimethylammonium (HDTMA) bromide on a clinoptilolite. The adsorption of the surfactant modified the surface properties of the clinoptilolite and enhanced the anionic capacity of the SMZ. The adsorption equilibrium data of As(V) from the water solution on the SMZ were obtained in a batch adsorber, and the Langmuir isotherm matched the data reasonably well. The As(V) adsorption capacity of the SMZ was 12.5 times greater than that of the clinoptilolite. The adsorption of As(V) on SMZ was mainly due to the interactions between the anionic sites of the SMZ and the As(V) anions in water solution. The adsorption capacity of the SMZ was dependent on the solution pH. The adsorption capacity was increased and decreased by augmenting the pH from 5 to 7 and from 7 to 12, respectively. This unusual behavior was due to the fact that the affinity of the As(V) for the SMZ was dependent on the As(V) species that were present in solution. The adsorption capacity of the SMZ was slightly favored by decreasing the temperature from 25 to 15 °C. The heat of adsorption was estimated to be ΔH _ads=−46.82 KJ/mol, indicating that the adsorption was exothermic and the As(V) was chemisorbed on the SMZ.     

Conformational flexibility of a synthetic glycosylaminoglycan bound to a fibroblast growth factor. FGF-1 recognizes both the (1)C(4) and (2)S(O) conformations of a bioactive heparin-like hexasaccharide

The first direct NMR determination of the conformation of a conformationally flexible heparin-like hexasaccharide bound to a key receptor, FGF-1, is described. The determination has been based on the use of a 13C-labeled protein and a regular 12C sugar. FGF-1 recognizes several conformations of the iduronic moieties of the hexasaccharide. Therefore, this case is different than that described for the controversial recognition of heparin-like saccharides by AT-III, which seems to recognize just one conformation of the iduronic acid residues.     

On the Reaction Mechanism of the Complete Intermolecular O2 Transfer between Mononuclear Nickel and Manganese Complexes with Macrocyclic Ligands

The recently described intermolecular O₂ transfer between the side‐on Ni‐O₂ complex [(12‐TMC)Ni‐O₂]⁺ and the manganese complex [(14‐TMC)Mn]²⁺, where 12‐TMC and 14‐TMC are 12‐ and 14‐membered macrocyclic ligands, 12‐TMC=1,4,7,10‐tetramethyl‐1,4,7,10‐tetraazacyclododecane and 14‐TMC=1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclotetradecane, is studied by means of DFT methods. B3LYP calculations including long‐range corrections and solvent effects are performed to elucidate the mechanism. The potential energy surfaces (PESs) compatible with different electronic states of the reactants have been analyzed. The calculations confirm a two‐step reaction, with a first rate‐determining bimolecular step and predict the exothermic character of the global process. The relative stability of the products and the reverse barrier are in line with the fact that no reverse reaction is experimentally observed. An intermediate with a μ‐η¹:η¹‐O₂ coordination and two transition states are identified on the triplet PES, slightly below the corresponding stationary points of the quintet PES, suggesting an intersystem crossing before the first transition state. The calculated activation parameters and the relative energies of the two transition sates and the products are in very good agreement with the experimental data. The calculations suggest that a superoxide anion is transferred during the reaction.     

Asymmetric intermolecular Pauson-Khand reactions of unstrained olefins: the (o-dimethylamino)phenylsulfinyl group as an efficient chiral auxiliary

The first asymmetric version of intermolecular Pauson-Khand reactions of unstrained alkenes is described. Generally simple acyclic alkenes exhibit low reactivity and regioselectivity in intermolecular Pauson-Khand reactions; however, o-(dimethylamino)phenyl vinyl sulfoxide reacts under very mild conditions with a wide variety of terminal alkynes in a completely regioselective and highly stereoselective manner. The utility of the resulting 5-sulfinyl-2-cyclopentenones in asymmetric synthesis is illustrated by a very short enantioselective synthesis of the antibiotic (-)-pentenomycin I.     

Rapid trace analysis of alachlor in water and vegetable samples

The use of a rapid and specific (cross-reactivity<4%) enzyme-linked immunosorbent assay (ELISA) for the determination of alachlor residues in water and vegetable samples is addressed. The analytical method consists of a fast extraction procedure followed by an optimised ELISA. The detection limit was 0.44 microg l(-1), with a linear range from 0.89 to 143.2 microg l(-1). For alachlor extraction from water samples, different solid-phase cartridges (C, Ph, C8 and C2) were assayed using MeOH as eluent. Extracts were diluted (1:4) with distilled water before ELISA. This procedure gave recoveries close to 100% with RSDs<14%. For vegetable samples, alachlor was extracted directly with MeOH and the extracts diluted 1:40 (v/v) with saline buffer prior to ELISA. The results obtained by the proposed procedure correlate well with the reference method (multiresidue extraction-GC-MS) for vegetable samples (r>0.85).