Assessment of enzyme-linked immunosorbent assay for the determination of 2,4,5-TP in water and soil

A highly sensitive and specific indirect enzyme-linked immunosorbent assay is described for Silvex, 2-(2,4,5 trichlorophenoxy)propionic acid, (2,4,5-TP). One specific feature of the immunoassay is the use of simple chemical activation of chlorophenoxy acids to prepare both the immunizing and coating conjugates. The assay is based on the use of polyclonal antibodies raised against 2,4,5-TP, and a peroxidase-labeled secondary antibody for colorimetric detection. The effect of different chemical conditions (pH, and salt and detergent concentration) on immunoassay performance has been studied. Under the best conditions the least detectable dose and the sensitivity (IC(50)) for 2,4,5-TP were 0.05 micro g L(-1) and 0.80 micro g L(-1), respectively. The optimized immunoassay was also highly specific, showing little (6.9% for 2,4,5-T) or no cross-reactivity with other similar herbicides. The assay was used to determine 2,4,5-TP in water and soils. The excellent recoveries obtained (mean values ranging between 89% and 104%) make this immunoassay a suitable screening method for either environmental monitoring or laboratory quantification of 2,4,5-TP.     

A study of substituent effect on 1H and 13C nmr spectra of N‐ and C‐substituted carbazoles

¹H and ¹³C nmr spectra of several N‐ and C‐substituted carbazoles (Series 1, 2, 3 and 4) were measured. Correlations between chemical shifts and substituent constants show that these parameters describe properly the substituent effect on the nmr phenomena. Atomic charge densities for carbazoles of Series 1, 2, 3 and 4 were calculated by using the semi empirical PM3 method. These values also show a linear correlation with the ¹³C chemical shifts. The synthesis of several carbazole derivatives 1a – 1g, 2a – 2g, 3a – 3j and 4a – 4g have been carried out according to literature procedures. The carbazoles 3i, 3j and 4c have been synthesized and fully characterized for the first time.     

Mechanical,thermal and morphological properties of poly(ε‐caprolactone)/zein blends

Blends of poly(ε‐caprolactone) (PCL) with zein (PCL/zein) in different proportions (100/0, 75/25, 50/50, 25/75 and 0/100 wt% containing 5 wt% glycerol) were compared based on their mechanical properties (tensile strength, elongation at break, and Young's modulus), and on their thermal properties, the latter determined by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The morphology of the materials was studied by scanning electron microscopy (SEM). Blends of PCL/zein showed reduced tensile strength and elongation at break, but increased Young's modulus compared to the pure polymers, in agreement with the DMTA and SEM results. These findings indicated that PCL and zein were incompatible. TGA showed that the thermal stability was enhanced by the addition of zein to PCL, whereas SEM showed a poor interfacial interaction between the polymers. Copyright © 2004 John Wiley & Sons, Ltd.     

The tautomerism of Omeprazole in solution: a 1H and 13C NMR study

The tautomerism of 5(6)-methoxy-2-([(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl] sulfinyl)-1H-benzimidazole (omeprazole) was determined in solution, K(T) = 0.59 in THF at 195 K, in favor of the 6-methoxy tautomer. The assignment of the signals was made by comparison with its two N-methyl derivatives in acetone-d6 and through theoretical calculations of the absolute shieldings (GIAO/DFT/6-311++G**).     

Synthesis and structure of the incomplete cuboidal clusters [W3Se4H3(dmpe)3]+, [W3Se4H(3-x)(OH)x(dmpe)3]+ and [W3Se4(OH)3(dmpe)3]+, and the mechanism of the acid-assisted substitution of the coordinated hydrides

The novel incomplete cuboidal cluster [W3Se4H3(dmpe)3](PF6), [1](PF6), has been prepared by reduction of [W3Se4Br3(dmpe)3](PF6) with LiBH4 in THF solution. The trihydroxo complex [W3Se4(OH)3(dmpe)3](PF6), [2](PF6), was obtained by reacting [W3Se4Br3(dmpe)3](PF6) with NaOH in MeCN-H2O solution. The complexes [1](PF6) and [2](PF6) were converted to their BPh4- salts by treatment with NaBPh4. Recrystallisation of [1](BPh4) in the presence of traces of water affords the mixed dihydride hydroxo complex [W3Se4H2(OH)(dmpe)3](BPh4). The crystal structures of [1](BPh4), [2](BPh4) and [W3Se4H2(OH)(dmpe)3](BPh4) have been resolved. Although the [1]+ trihydride does not react with an excess of halide salts, reaction with HX leads to [W3Se4X3(dmpe)3]+ (X = Cl, Br). The kinetics of this reaction has been studied at 25 degrees C in MeCN-H2O solution (1:1, v/v) and found to occur with two consecutive kinetic steps. The first step is independent of the nature and concentration of the X(-) anion but shows a first order dependence on the concentration of acid (k1 = 12.0 mol(-1) dm(3) s(-1)), whereas the second one is independent of the nature and concentration of both the acid and added salts (k2 = 0.024 s(-1)). In contrast, the reaction of [2]+ with acids occurs in a single step with kobs = 0.63 s(-1)(HCl) and 0.17 s(-1)(HBr). These kinetic results are discussed on the basis of the mechanism previously proposed for the reactions of the analogous [W3S4H3(dmpe)3]+ cluster, with special emphasis on the effects caused by the change of S by Se on the rate constants for the different processes involved.     

Synthesis of the O-linked hexasaccharide containing β-D-Galf-(1→2)-β-D-Galf in Trypanosoma cruzi mucins

The hexasaccharide β-D-Galp-(1→2)-[β-D-Galp-(1→3)]-β-D-Galp-(1→6)-[β-D-Galf(1→2)-β-D-Galf(1→4)]-D-GlcNAc (1) is the largest carbohydrate structure released as alditol by reductive β-elimination from mucins of some strains of T. cruzi. The terminal β-D-Galp units are sites of sialylation by trans-sialidase which transfers sialic acid from the host to the parasite. Hexasaccharide 1 was synthesized by a [3 + 3]-convergent strategy based on a nitrile assisted glycosylation, using the trichloroacetimidate method. The β-D-Galf-(1→2)-β-D-Galf-D-GlcNAc synthon was sequentially constructed from the reducing end to the non-reducing end employing benzyl α-D-galactofuranoside as starting material for the internal Galf unit. The choice of this novel precursor, obtained in one-reaction step from galactose, allowed the introduction of an orthogonal and participating levulinoyl group at O-2. Thus, the diastereoselective construction of the Galf-β(1→4)-GlcNAc linkage by the trichloroacetimidate method of glycosylation was achieved. The (1)H NMR spectrum of alditol 2 was identical to the product released by β-elimination from the parasite mucin.     

Determination of bromate in drinking water by ultraperformance liquid chromatography-tandem mass spectrometry

Bromate is a byproduct formed as a result of disinfection of bromide-containing source water with ozone or hypochlorite. The International Agency for Research on Cancer has recognized bromate as a possible human carcinogen, thus it is essential to determine in drinking water. Present work highlights a development of sensitive and fast analytical method for bromate determination in drinking water by using ultraperformance liquid chromatography-tandem mass spectrometry. The quality parameters of the developed method were established, obtaining very low limit of detection (0.01 ng/mL), repeatability and reproducibility have been found to be less than 3% in terms of relative standard deviation when analyzing a bromate standard at 0.05 μg/mL with 0.4 min analysis time. Developed method was applied for the analysis of metropolitan and bottled water from Saudi Arabia; 22 samples have been analyzed. Bromate was detected in the metropolitan water samples (from desalinization source) at concentrations ranging between 3.43 and 75.04 ng/mL and in the bottled water samples at concentrations ranging between 2.07 and 21.90 ng/mL. Moreover, in comparison to established analytical methods such as liquid chromatography-tandem mass spectrometry, the proposed method was found to be very sensitive, selective and rapid for the routine analysis of bromate at low level in drinking water.     

Shape-dependent electrocatalysis: formic acid electrooxidation on cubic Pd nanoparticles

The electrocatalytic properties of palladium nanocubes towards the electrochemical oxidation of formic acid were studied in H(2)SO(4) and HClO(4) solutions and compared with those of spherical Pd nanoparticles. The spherical and cubic Pd nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The intrinsic electrocatalytic properties of both nanoparticles were shown to be strongly dependent on the amount of metal deposited on the gold substrate. Thus, to properly compare the activity of both systems (spheres and nanocubes), the amount of sample has to be optimized to avoid problems due to a lower diffusion flux of reactants in the internal parts of the catalyst layer resulting in a lower apparent activity. Under the optimized conditions, the activity of the spheres and nanocubes was very similar between 0.1 and 0.35 V. From this potential value, the activity of the Pd nanocubes was remarkably higher. This enhanced electrocatalytic activity was attributed to the prevalence of Pd(100) facets in agreement with previous studies with Pd single crystal electrodes. The effect of HSO(4)(-)/SO(4)(2-) desorption-adsorption was also evaluated. The activity found in HClO(4) was significantly higher than that obtained in H(2)SO(4) in the whole potential range.     

Resolution of the mechanism of CO electrooxidation on steady state and evaluation of the kinetic parameters for Pt and Ru electrodes

The carbon monoxide oxidation reaction (COOR) was studied on steady-state conditions by chronoamperometry on polycrystalline smooth platinum and ruthenium rotating disc electrodes in CO-saturated acid solution. The chronoamperometric response did not show current oscillations and therefore the current density (j) vs. overpotential (η) curves on steady state could be obtained. In order to interpret these results, kinetic expressions were derived starting from the mechanism proposed by S. Gilman, which considers two adsorbed reaction intermediates, carbon monoxide (CO_ad) and hydroxyl (OH_ad). Analytical expressions as a function of overpotential for the current density, the surface coverage of the adsorbed species (θ _CO and θ _OH) and the CO and CO₂ pressures at the electrode surface on steady state were obtained. This set of equations was used for the correlation of the experimental polarization curves and the evaluation of the corresponding kinetic parameters. From these values, the dependences of the surface coverage of the adsorbed intermediates on overpotential were simulated, as well as those of the partial pressure of CO and CO₂. Thus, it was demonstrated that the Gilman’s mechanism accurately describes the experimental results on steady state of the COOR on these metals.