随机生长误差对双腔型平顶法布里-珀罗滤波器的影响

在光网络中平顶滤波器可以有效地提高信道光检测的快速性和准确性。利用两个法布里珀罗腔间的串联耦合,可以构建出具有平顶透射特性的双腔型法布里珀罗滤波器。采用传输矩阵的方法,研究了随机生长误差对双腔型平顶滤波器透射特性的影响。模拟分析表明,当两个法布里珀罗腔的物理厚度差超过一个纳米时,在透射谱中就会出现两个高度不同的透射峰;解释了实测器件的透射谱中的双峰不对称性;用界面起伏的概念解释了实测滤波器带宽大于理论值的原因。理论分析与实验结果取得了较好的一致。     

Reproducibility of the quantitative assessment of cartilage morphology and trabecular bone structure with magnetic resonance imaging at 7 T

To assess the reproducibility of quantitative measurements of cartilage morphology and trabecular bone structure of the knee at 7 T, high-resolution sagittal spoiled gradient-echo images and high-resolution axial fully refocused steady-state free-precession (SSFP) images from six healthy volunteers were acquired with a 7-T scanner. The subjects were repositioned between repeated scans to test the reproducibility of the measurements. The reproducibility of each measurement was evaluated using the coefficient(s) of variation (CV). The computed CV were 1.13% and 1.55% for cartilage thickness and cartilage volume, respectively, and were 2.86%, 1.07%, 2.27% and 3.30% for apparent bone volume over total volume fraction (app.BV/TV), apparent trabecular number (app.Tb.N), apparent trabecular separation (app.Tb.Sp) and apparent trabecular thickness (app.Tb.Th), respectively. The results demonstrate that quantitative assessment of cartilage morphology and trabecular bone structure is reproducible at 7 T and motivates future musculoskeletal applications seeking the high-field strength's superior signal-to-noise ratio.     

高灵敏度的量子迈克耳孙干涉仪

迈克耳孙干涉仪不仅可以用来研究物理学的基本问题,而且能够用于精密测量,比如引力波信号的测量.因此,构建高灵敏度的迈克耳孙干涉仪是实现微弱信号测量的关键.目前,人们利用压缩态可以降低迈克耳孙干涉仪的噪声;通过光学四波混频过程能够放大马赫·曾德尔干涉仪中的相位信号,从而提高干涉仪的信噪比和灵敏度.本文研究了一种用于高灵敏度相位测量的量子迈克耳孙干涉仪.在迈克耳孙干涉仪中,利用非简并光学参量放大器取代干涉仪中的线性光学分束器;并且将压缩态注入干涉仪的真空通道,可以得到高信噪比和高灵敏度的干涉仪.由于存在不可避免的光学损耗,分析了迈克耳孙干涉仪内部和外部的损耗对相位测量灵敏度的影响.通过理论计算研究了干涉仪的相位测量灵敏度随系统参数的变化关系,得到了高灵敏度的相位测量量子迈克耳孙干涉仪的实现条件,为用于精密测量的干涉仪的设计提供了直接参考.     

氦氩射频容性放电发射光谱分析

光抽运亚稳态稀有气体激光器利用放电等离子体作为激光的增益介质.为掌握容性射频放电的放电参数对等离子体各项参数的影响的基本规律,利用等离子体发射光谱法研究了氦氩混合气体在不同装置、不同Ar组分、不同气压和不同射频注入功率下的等离子体参数.利用残留水蒸气产生的OH自由基A~2Σ~+→X~2Π的转动光谱分析获得气体温度;利用电子态光谱的玻尔兹曼做图法获得电子激发温度,利用Ar原子696.5 nm谱线的斯塔克展宽获得电子密度.结果表明:气体温度随气压增加略微上升,在一个大气压下改变组分和放电功率,气体温度变化不大;电子激发温度随总气压的下降而上升,且随着Ar组分的增加而略微下降;目前放电条件下的电子密度均在10~(15)cm~(-3)量级;长时间放电监测表明,残留的水蒸气会导致电子温度的下降,从而降低Ar亚稳态的产率.     

Role of Bi ions for Er ions efficient 1.54 μm light emission in Er/Bi codoped SiO2 thin film prepared by sol-gel method

Er/Bi codoped SiO₂ thin films were prepared by sol-gel method and spin-on technology with subsequent annealing process. The bismuth silicate crystal phase appeared at low annealing temperature while vanished as annealing temperature exceeded 1000 °C, characterized by X-ray diffraction, and Rutherford backscattering measurements well explained the structure change of the films, which was due to the decrease of bismuth concentration. Fine structures of the Er³⁺-related 1.54 μm light emission (line width less than 7 nm) at room temperature was observed by photoluminescence (PL) measurement. The PL intensity at 1.54 μm reached maximum at 800 °C and decreased dramatically at 1000 °C. The PL dependent annealing temperature was studied and suggested a clear link with bismuth silicate phase. Excitation spectrum measurements further reveal the role of Bi³⁺ ions for Er³⁺ ions near infrared light emission. Through sol-gel method and thermal treatment, Bi³⁺ ions can provide a perfect environment for Er³⁺ ion light emission by forming Er-Bi-Si-O complex. Furthermore, energy transfer from Bi³⁺ ions to Er³⁺ ions is evidenced and found to be a more efficient way for Er³⁺ ions near infrared emission. This makes the Bi³⁺ ions doped material a promising application for future erbium-doped waveguide amplifier and infrared LED.     

A density functional theory study of CH4 dehydrogenation on Co(1 1 1)

The dehydrogenation of CH₄ on the Co(1 1 1) surface is studied using density functional theory calculation (DFT). It is found that CH₄ is favored to dissociate to CH₃ and then transforms to CH₂ and CH by sequential dehydrogenation, and CH₄ activation into CH₃ and H is the rate-determining step on the Co(1 1 1) surface. CH₂ is quite unstable on Co(1 1 1) surface. CH dehydrogenation into C and H is difficult. CH₃ and H prefer to adsorb on 3-fold hollow hcp and fcc sites, and CH₂, CH and C prefer to adsorb on hcp sites.     

Investigation of magnetic properties for oblique deposited granular films by magnetic field annealing

A series of (Fe₅₇Co₂₄Ni₄Nb₂B₁₃)_x-(SiO₂)_1−x nano-granular thin films were fabricated by magnetron sputtering with different oblique incidence angle θ and excellent soft magnetic properties are achieved. Based on the results of magnetic field anneal at different temperature T_a, it is evidenced that orientation of atomic pairs contributes to the annealing treatment, and could manipulate magnetic anisotropy. The damping coefficient α decreases with increasing angle θ and this is ascribed to the anisotropy dissipation.     

Deposition of Ag nanostructures on TiO2 thin films by RF magnetron sputtering

Ag nanostructures on TiO₂ films were deposited by RF magnetron sputtering under variable deposition parameters, such as DC potential, RF-power and total pressure. The concentration, shape, and distribution of the deposited nanostructures and continuous Ag films on thin films of TiO₂ can be tailored by careful variation of the deposition parameters. Controllable clusterlike, islandlike and film Ag structures on TiO₂ film were obtained, respectively. DC potential was found as an appropriate parameter to tailor the change of Ag nanostructure and the overall Ag amount. The compositions, nanostructures and morphologies of nanocomposite films appreciably influence the optical response.     

Diode-pumped passively Q-switched and mode-locked Nd:GGG laser at 1.3 μm with V<Superscript>3+</Superscript>:YAG saturable absorber

Using V³⁺:YAG crystal as the saturable absorber, a diode-pumped passively Q-switched and mode-locked Nd:GGG laser operating at 1.3 μm is realized for the first time. The mode-locking modulation depth of nearly 100% has been achieved. The maximum output power and the single Q-switched pulse energy are 410 mW and 8.3 μJ. The mode-locked pulse inside the Q-switched pulse has a repetition rate of 349 MHz, and its average pulse width is estimated to be about 750 ps.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.