Synthesis and reactivity of dimeric Ar'TlTlAr' and trimeric (Ar"T1)3 (Ar', Ar" = bulky terphenyl group) thallium(I) derivatives: Tl(I)-Tl(I) bonding in species ligated by monodentate ligands

The synthesis and characterization of three new organothallium(I) compounds are reported. Reaction of (Ar'Li)(2) (Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)) and Ar"Li (Ar" = C(6)H(3)-2,6-(C(6)H(3)-2,6-Me(2))(2)) with TlCl in Et(2)O afforded (Ar'Tl)(2) (1) and (Ar' 'Tl)(3) (2). The "dithallene" 1 is the heaviest group 13 dimetallene and features a planar, trans-bent structure with Ar'Tl-Tl = 119.74(14) degrees and Tl-Tl = 3.0936(8) A. Compound 2 is the first structurally characterized neutral, three-membered ring species of formula c-(MR)(3) (M = Al-Tl; R = organo group). The Tl(3) ring has Tl-Tl distances in the range ca. 3.21-3.37 A as well as pyramidal Tl geometries. The Tl-Tl bonds in 1 and 2 are outside the range (2.88-2.97 A) of Tl-Tl single bonds in R(2)TlTlR(2) compounds. The weak Tl-Tl bonding in 1 and 2 leads to their dissociation into Ar'Tl and Ar' 'Tl monomers in hexane. The Ar'Tl monomer behaves as a Lewis base and readily forms a 1:1 donor-acceptor complex with B(C(6)F(5))(3) to give Ar'TlB(C(6)F(5))(3), 3. Adduct 3 features an almost linear thallium C(ipso)-Tl-B angle of 174.358(7) degrees and a Tl-B distance of 2.311(2) A, which indicates strong association. Treatment of 1 with a variety of reagents resulted in no reactions. The lower reactivity of 1 is in accord with the reluctance of Tl(I) to undergo oxidation to Tl(III) due to the unreactive character of the 6s(2) electrons.     

High-performance anion-exchange chromatographic study of desialylated human alpha 1-acid glycoprotein variants. Development of a fractionation method for the protein slow variants

The three main desialylated variants (F1, S and A) of human alpha 1-acid glycoprotein (AAG), a serum acute-phase reactant, were analysed by high-performance anion-exchange chromatography in order to determine their optimum separation conditions. The analysis consisted of three steps, as follows: (1) A desialylated commercial AAG was separated into one "fast"- and one "slow"-migrating fraction by preparative isoelectrofocusing. The "fast" and "slow" fractions were shown to contain the F1 variant and a mixture of the S and A variants, respectively. (2) The pH titration curves of these two fractions were then measured by strong anion-exchange chromatography with several buffer systems of increasing pH. From the data obtained, it was not possible to select the optimum conditions to separate the "fast" variant F1 from the "slow" variants A and S. However, the S and A variants were shown to ionize very differently. (3) The specific fractionation of the S and A variants was therefore carried out by anion-exchange chromatography under operating conditions based on the data obtained from the study of their pH titration curves. This was performed both with the "slow"-migrating fraction obtained by preparative isoelectrofocusing of commercial AAG and with an AAG (containing only variants S and A) purified from an individual serum on immobilized Cibacron Blue F3G-A. Identification of the fractionated proteins was achieved by analytical isoelectrofocusing.     

Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Time-resolved laser-induced fluorescence spectroscopy for enhanced demarcation of human atherosclerotic plaques

We report on the enhanced demarcation between human atherosclerotic plaques and normal vessel wall obtained using time-resolved detection of laser-induced fluorescence rather than the customary time-integrated monitoring technique. A frequency-doubled mode-locked and cavity-dumped continuous wave dye laser was used for picosecond pulse generation at 320 nm, and photon-counting techniques were employed for the time-resolved signal monitoring from human aorta samples in vitro. Implications for imaging fluorescence angioscopy and spectroscopic guidance in laser ablation of plaque are indicated.     

Structures de l'odyendane et l'odyendene deux nouveaux quassinoides d'odyendea gabonensis (pierre) engl. Simaroubacees.

From the trunk bark of Odyendea gabonensis (Pierre) Engl. Simaroubaceae, two-new quassinoids have been isolated : Odyendane and Odyendene. Their structures were established from spectral data and X-Ray diffraction analysis.     

Dilute solution properties of poly(N-vinyl-3,6-dibromo carbazole)—III. Phase equilibrium studies

The phase relationships of poly(N-vinyl-3,6-dibromo carbazole) (PVK-3, 6-Br₂) were examined for four solvents, viz, o-chlorophenol, p-chloro-m-cresol, o-dichlorobenzene and bromobenzene. Upper critical solution temperatures (UCST) have been determined for solutions of PVK-3,6-Br, fractions in o-chlorophenol and p-chloro-m-cresol over the molecular weight range $\text{M}{}_{\mathrm{<mtext>w</mtext>}}\text{× 10}{}^{\mathrm{?4}}\text{= 125.0}\text{to}\text{4.8}$. The Flory temperature, θ, obtained from UCST for the PVK-3,6-Br₂/o-chlorophenol and PVK-3,6-Br₂/p-chloro-m-cresol systems are 66.0 and 112.9°C, respectively. The θ-temperatures were checked against molecular weight and viscosity data to determine the Mark-Houwink equations for these two theta solvents, with satisfactory agreement. The relations are

$\text{[ν] = 27.5}{}_4\text{× 10}{}^{\mathrm{?10}}\text{×}\text{M}{}^{0.50}{}_{\mathrm{<mtext>w</mtext>}}\text{(o-}\text{chlorophenol}\text{, 60.0°}\text{C}$

$\text{[ν] = 30.2}{}_4\text{× 10}{}^{\mathrm{?10}}\text{×}\text{M}{}^{0.50}{}_{\mathrm{<mtext>w</mtext>}}\text{(p-}\text{chloro}\text{-m}\text{cresol}\text{, 112.9°}\text{C}$

The characteristic ratio C_∞ = 〈R²〉₀/nl² was found to be 16.6 in o-chlorophenol at 60.0°C and 17.6 in p-chloro-m-cresol at 112.9°C. The value of the characteristic ratio C_∞ of PVK-3,6-Br₂ is of the same order of that for poly(N-vinyl carbazole). This indicates that the bromine atoms at the 3 and 6 (meta) positions have only an inappreciable effect on the hindering potential for rotation about the CC bond. This agreement of C_∞ for both polymers may also be taken as indicating that the effect of interaction between polar groups at the m-position on the hindering potential for rotation is small. The phase diagrams of PVK-3,6-Br₂ obtained in o-dichlorobenzene and bromobenzene seem to be characteristic of organized phase structures such as those found in systems exhibiting thermoreversible gelation. Light scattering measurement on PVK-3,6-Br₂ dissolved in o-dichlorobenzene, a gelation promoting solvent, and tetrahydrofuran, a very good solvent, strongly indicate that the macromolecular species in o-dichlorobenzene contain some extent supermolecular structures (aggregates, association of chain segments, etc.). These characteristic structures of PVK-3,6-Br₂ in o-dichlorobenzene and bromobenzene at 25°C are also characterized by high values of the Huggins' constant k′; for tetrahydrofuran solutions, the k′ values were in the range normally found for many good solvent-polymer systems.     

Radiation-induced crosslinking and grafting of two polyphosphazene elastomers

The radiation-induced crosslinking and grafting of two aryloxy-substituted elastomeric polyphosphazenes have been carried out by both gamma and electron beam irradiation. The classic Charlesby–Pinner [1] plus a simpler approach were used to determine the G(X) values for the crosslinked elastomeric polymers. The apparent G(X) value for the same polymer depended on whether the gamma-ray or the E-beam results were used. The presence of 8.5% repeat units with allylic groups in the side chain increased the G(X) value by an order of magnitude when the irradiation was performed under vacuum with the gamma source. The extent of acrylic acid grafting was also higher for the polymer containing the allylic group. Nearly all the grafted polyphosphazene films were insoluble in THF, a good solvent for the ungrafted samples.     

Acidity and activity of H-mordenite in m-xylene isomerization

The dependence of the activity of H-mordenites prepared from a natural mordenite on the nature and strength of the acid groups present was studied. The superior catalytic activity and stability of the H(Ag)–MOR zeolite compared with other H-forms is explained on the basis of NH₃ adsorption and IR measurements.

---

H-, . H(Ag)–MOP H- NH₃ .

     

Influence of a silyl group on an allylic position. A theoretical approach

Allylsilanes show in certain cases a behaviour towards electrophiles which is opposite to that of its carbon homologues. Theoretical calculations using Dewar's MINDO/3 method performed on 3-methyl 3-butenyl trimethylsilane and 2-methyl 2-butene show that geometrical optimization leads to a silicon-allylic carbon bond nearly parallel to the double bond π cloud, and both net atomic charges and HOMO coefficients indicate an inversion between these two substrates.     

Application of triethylenetetramine to the separation of metal ions on selective exchange resin chelex 100

The distribution coefficients of Ca²⁺, Cu²⁺, Ni²⁺ and Pb²⁺ on Chelex 100 in the presence and absence of triethylenetetramine have been determined. Ca²⁺, Cu²⁺, Ni²⁺ and Mg²⁺, Cu²⁺, Pb²⁺ mixtures have been separated on Chelex 100 and Dowex A-1 respectively.