The hydrological response of heavy clay grassland soils to rainfall in south‐west England using δ2H

Stable isotopes of water have been previously used in catchment studies to separate rain‐event water from pre‐event groundwater. However, there are a lack of studies at the smaller scale looking at the separation of event water from pre‐event water. This is particularly relevant for heavy clay soil systems through which the movement of water is uncertain but is thought to be rainwater‐dominated. The data presented here were collected at a rural site in the south‐west of England. The historic rainfall at the site was isotopically varied but similar to the global meteoric water line, with annual weighted means of ?37‰ for δ²H and ?5.7‰ for δ¹⁸O and with no seasonal variation. Drainage was sampled from the inter‐flow (surface runoff + lateral through‐flow) and drain‐flow (55 cm deep mole drains) pathways of two 1 ha lysimeters during two rainfall events, which had δ²H values of ?68‰ and ?92‰, respectively. The δ²H values of the lysimeter drainage water suggest that there was no contribution of event water during the first, small discharge (Q) event; however, the second larger event did show isotopic variation in δ²H values negatively related to Q indicating that rainwater was contributing to Q. A hydrograph separation indicated that only 49–58% of the inter‐flow and 18–25% of the drain‐flow consisted of event water. This was surprising given that these soil types are considered retentive of soil water. More work is needed on heavy clay soils to understand better the nature of water movement from these systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Expeditious synthesis of TADDOL-derived phosphoramidite and phosphonite ligands

A simple and reliable protocol for the synthesis of TADDOL-derived monodentate ligands is reported. The reaction of the requisite TADDOL with PCl₃ is immediately followed by the treatment of the crude intermediate with both nitrogen and carbon nucleophiles. Several previously unknown or difficult-to-make phosphoramidite and phosphonite ligands L1–L3 and L4–L9 were accessed using this novel procedure.     

Response to “Comment on paper ‘The bulk modulus and Poisson's ratio of “incompressible” materials’”

The incorrectness of the common assumption that rubbery polymers are incompressible does not preclude its yielding accurate determinations of the elastic modulus for nonlinear deformations.     

Water intake of cellulose materials monitored by positron annihilation lifetime spectroscopy

Cellulose - In this study, for the first time, the experimental technique of positron annihilation lifetime spectroscopy (PALS) has been applied to monitor in situ the microstructural changes of...     

Prebiotically Plausible Autocatalytic Peptide Amyloids

The prebiotic emergence of molecules capable both of self-replication and of storing information was a defining event at the dawn of life. Still, no plausible prebiotic self-replication of biologically relevant molecules has been demonstrated. Building upon the known templating nature of amyloids, we present two systems in which the products of a peptide-bond-forming reaction act as self-replicators to enhance the yield and stereoselectivity of their formation. This first report of an amino acid condensation that can undergo autocatalysis further supports the potential role of amyloids in prebiotic molecular evolution as an environment-responsive and information-coding system capable of self-replication.     

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure–Property Relationship

A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki-coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X-ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB-T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene-linker-perylene compounds.     

Suppression of Liquid-Liquid Phase Separation and Aggregation of Antibodies by Modest Pressure Application

The high colloidal stability of antibody (immunoglobulin) solutions is important for pharmaceutical applications. Inert cosolutes, excipients, are generally used in therapeutic protein formulations to minimize physical instabilities, such as liquid–liquid phase separation (LLPS), aggregation and precipitation, which are often encountered during manufacturing and storage. Despite their widespread use, a detailed understanding of how excipients modulate the specific protein-protein interactions responsible for these instabilities is still lacking. In this work, we demonstrate the high sensitivity to pressure of globulin condensates as a suitable means to suppress LLPS and subsequent aggregation of concentrated antibody solutions. The addition of excipients has only a minor effect. The high pressure sensitivity observed is due to the fact that these flexible Y-shaped molecules create a considerable amount of void volume in the condensed phase, leading to an overall decrease in the volume of the system upon dissociation of the droplet phase by pressure already at a few tens of to hundred bar. Moreover, we show that immunoglobulin molecules themselves are highly resistant to unfolding under pressure, and can even sustain pressures up to about 6 kbar without conformational changes. This implies that immunoglobulins are resistant to the pressure treatment of foods, such as milk, in high-pressure food-processing technologies, thereby preserving their immunological activity.     

Novel Foaming-Agent Free Insulating Geopolymer Based on Industrial Fly Ash and Rice Husk

This study highlights the synthesis of a new thermal insulating geopolymer based on the alkaline activation of fly ashes. A porous geopolymer material can be prepared without the addition of a foaming agent, using high ratio solution/ashes (activating solutions used are water, sodium or potassium hydroxide). In order to increase the porosity of the material and to make it more ecological, rice husks are incorporated into the formulation. The geopolymer materials were prepared at room temperature and dried at moderate temperature (105 °C) by a simple procedure. The microstructural characteristics of these new porous geopolymers were assessed by optical microscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and X-ray fluorescence (XRF). Infrared spectroscopy (FTIR) was used to confirm the geopolymerisation. The effect of the ratio solution/ashes and the percentage of the rice husk addition on thermal and mechanical analysis was evaluated. An insulating material for a solution/ashes ratio of 0.9 and a rice husk content of 15% having a λ value of 0.087 W/(m·K), a porosity of 61.4% and an Rc value of 0.1 MPa was successfully prepared.     

The structure of thorikosite,a naturally occurring member of the bismuth oxyhalide group

Thorikosite, (Pb₃Sb_0.6As_0.4)(O₃0H)Cl₂, is a naturally occurring member of the bismuth oxyhalide group isostructural with LiBi₃O₄Cl₂. The space group isI4/mmm witha = 3.919(1)A?,c = 12.854(5)A?, andZ = 1. A crystal structure analysis showed complete solid solution of Pb²⁺, Sb³⁺, and As³⁺ on the single cation site and large atomic temperature factors indicative of pervasive structural disorder. The latter is due to the structural adjustments necessary to accommodate cations of very different sizes in the same site. Thorikosite is closely related to synthetic tetragonal PbSbO₂Cl through the coupled substitution Sb³⁺O^2? ? Pb²⁺(OH)^?.     

Synthesen von Dibenzo[b,e][1,4]dioxin-2,3-chinonen,einschliesslich der Ecklonochinone A und B sowie der Isoecklonochinone A und B

Syntheses of Dibenzo[b,e][1,4]dioxin-2,3-quinones Including the Ecklonoquinones A and B and the Isoecklonoquinones A and B Oxidation of monomesyloxy-substituted pyrocatechols with MnO₂ in toluene using phase-transfer conditions leads in high yield to monomesyloxy-substituted dibenzo[b,e][1,4]dioxin-2,3-quinones with loss of one mesyloxy group. In this way, ecklonoquinone A ( 2 ), ecklonoquinone B ( 3 ), isoecklonoquinone A ( 43 ), and isoecklonoquinone B ( 44 ) were prepared. Their structures are based on X-ray analyses of ecklonoquinone-A leucoacetate ( 45 ) and the mesyloxy-substituted quinone 20 . The reddish-violet dibenzodioxin-diquinone 49 was prepared from an intermediate of the iso-series. The parent compound 1 has been synthesized in yields better than 50% from pyrocatechol and methyl 2,5-dioxo-2,5-dihydrobenzoate as oxidant and 2-methoxypyridin as catalyst. To rationalize the specific effect on the dimerisation step of the mesyloxy group, the intermediacy of 1,4-quinone monoacetals is proposed. This also applies to a proposed biogenetic scheme.