The synthesis and chemical reactions of certain pyrazolo[1,5-a]-1,3,5-triazines

3-Aminopyrazole was utilized as a starting material for the preparation of certain pyrazolo-[1,5-a]-1,3,5-triazines. 4-Chloro-2-methylthiopyrazolo[1,5-a]-1,3,5-triazine was prepared and used for studies of nucleophilic displacement reactions, and it has been found that both the chloro and methylthio groups may be displaced by nucleophiles. By modifications of these procedures we have prepared the adenine, hypoxanthine, and xanthine analogs of the pyrazolo-[1,5-a]-1,3,5-triazine ring system. Electrophilic substitution occurs in the 8-position of this ring system. The methyl group was introduced into the 4-position by a novel ring opening and ring closing of the 1,3,5-triazine ring.     

3,7-Dioxaazelaamides as Ionophores for Lithium Ion Selective Liquid Membrane Electrodes

Lipophilic neutral carriers were synthesized which show Li⁺/Na⁺ selectivities of up to ca. 80 in highly lipophilic liquid membranes. The sensor membranes exhibit improved response times and increased lifetimes as compared to systems described earlier. They allow reliable measurements of Li⁺ in blood serum within the clinical concentration range. A 1:1 Li⁺/ionophore complex of one representative (N,N,N′,N′-tetracyclohexyl-5,5-dimethyl-3,7-dioxaazelaamide) has been prepared, and its structure was elucidated by X-ray analysis.     

A 1,8-naphthalenediol-based unsymmetrical dinucleating ligand

A facile synthesis of 2-formyl-1,8-naphthalenediol is reported. Its potential as a general precursor for the preparation of unsymmetrical multidentate chelating ligand systems based on 1,8-naphthalenediol is demonstrated by the synthesis of the dinucleating ligand L(4-)(H(4)L=N,N'-bis(2-(1,8-naphthalenediol)methylidene)propylenediamine). Reaction of H(4) L with copper acetate results in the formation of the unsymmetrical dinuclear Cu(II) complex [LCu(2)](3), which has been structurally characterized by single-crystal X-ray diffraction. One Cu(II) ion is coordinated by a N(2)O(2) compartment of L(4-) and the other Cu(II) ion is coordinated by an O(4) compartment of L(4-) while they are bridged by two aryloxide functions of L(4-). A dimerization of two molecules of 3 to a tetranuclear entity 3(2) occurs through formation of weak apical Cu--O interactions. Analysis of the temperature dependent magnetic susceptibility measurements (2--290 K) established a strong intradimer exchange coupling J(12)=-371 cm(-1). This strong superexchange interaction fits nicely in a magneto-structural correlation which has been established for dinuclear bis(phenoxide)-bridged Cu(II) complexes demonstrating the electronic equivalence of the aryloxides of a phenol and 1,8-naphthalenediol.     

Macrocyclization on the fullerene core: Direct regio- and diastereoselective multi-functionalization of [60]fullerene,and synthesis of fullerene-dendrimer derivatives

The macrocyclization between buckminsterfullerene, C₆₀, and bis-malonate derivatives in double Bingel reaction provides a versatile and simple method for the preparation of covalent bis-adducts of C₆₀ with high regio- and diastereoselectivity. A combination of spectral analysis, stereochemical considerations, and X-ray crystallography (Fig. 2) revealed that out of the possible in-in, in-out, and out-out stereoisomers, the reaction of bis-malonates linked by o-, m-, or p-xylylene tethers afforded only the out-out ones (Scheme 1). In contrast, the use of larger tethers derived from 1,10-phenanthroline also provided a first example, (±)- 19 (Scheme 2), of an in-out product. Starting from optically pure bis-malonate derivatives, the new bis-functionalization method permitted the diastereoselective preparation of optically active fullerene derivatives (Schemes 4 and 5) and, ultimately, the enantioselective preparation (enantiomeric excess ee > 97%) of optically active cis-3 bis-adducts whose chirality results exclusively from the addition pattern (Fig. 6). The macrocyclic fixation of a bis-malonate with an optically active, 9,9′-spirobi[9H-fluorene]-derived tether to C₆₀ under generation of 24 and ent- 24 with an achiral addition pattern (Scheme 4) was found to induce dramatic changes in the chiroptical properties of the tether chromophore such as strong enhancement and reversal of sign of the Cotton effects in the circular dichroism (CD) spectra (Figs. 4 and 5). By the same method, the functionafized bis-adducts 50 and 51 (Schemes 10 and 11) were prepared as initiator cores for the synthesis of the fullerene dendrimers 62 , 63 , and 66 (Schemes 12 and 13) by convergent growth. Finally, the new methodology was extended, to the regio- and diastereoselective construction of higher cyclopropanated adducts. Starting from mono-adduct 71 , a clipping reaction provided exclusively the all-cis-2 tris-adduct (±)- 72 (Scheme 14), whereas the similar reaction of bis-adduct 76 afforded the all-cis-2 tetrakis-adduct 77 (Scheme 15). Electrochemical investigations by steady-state voltammetry (Table 2) in CH₂Cl₂ (+0.1M Bu₄NPF₆) showed that all macroeyciic bis(methano)fullerenes underwent multiple reduction steps, and that regioisomerism was not much influencing the redox potentials, All cis-2 bis-adducts gave an instable dianion which decomposed during the electrochemical reduction. In CH₂Cl₂, the redox potential of the fullerene core in dendrimers 62, 63 , and 66 is not affected by differences in size and density of the surrounding poly(ether-amide) dendrons. The all-cis-2 tris- and tetrakis(meihano)fullercnes (±) -72 and 77 , respectively, are reduced at more negative potential than previously reported all-e tris- and tetrakis-adducts with methane bridges that are also located along an equatorial belt. This indicates a larger perturbation of the original fullerene π-chromophore and a larger raise in LUMO energy in the former derivatives.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Composition of particles emitted at largep T and medium angles inpp,dd, andαα collisions at the CERN intersecting storage rings

The relative yields of kaons and protons compared with the yield of pions at highp _T and polar angles θ away from 90° (in the range from 10° to 45°) are presented forpp, dd, and αα interactions at a centre-of-mass energy \(\sqrt {s_{NN} } = 31\) GeV per nucleon-nucleon collision. The measured particle ratios depend on the atomic mass numberA of the beam particles and on θ. TheA dependence of the ratios becomes stronger for largerp _T and is more pronounced at smaller polar angles.     

High-p T αα andαp interactions

Properties of secondaries associated with a high-p _T charged trigger particle (3<p _T <5 GeV/c) were studied for αp and αα interactions at c.m. energies \(\sqrt s = 88\) GeV and 125 GeV, respectively. Thep _T distributions of secondaries in the away-jet and trigger-jet regions were compared with those for high-p _{T pp} interactions. No statistically significant differences were seen, except at lowp _T . Momentum and angular distributions of spectator and leading protons were studied as a function of charge and rapidity of the trigger hadron. The observed correlations between trigger charge and number of spectator protons provide evidence of valence quark contributions to the trigger jet.     

Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.