Isolation of a new two-dimensional honeycomb carbonato-bridged copper(II) complex exhibiting long-range ferromagnetic ordering

Atmospheric CO2 fixation by an aqueous solution containing Cu(ClO4)2.6H2O and 4-aminopyridine (4-apy) yields a novel example of a two-dimensional mu3-CO3 bridged copper(II) complex {[Cu(4-apy)2]3(mu3-CO3)2(ClO4)2.(1/2)CH3OH}n that has been characterized by IR, UV and X-ray crystallography; preliminary magnetic measurements show that complex exhibits long-range ordered ferromagnetic coupling.     

Crystal structure and magnetic interactions in nickel(II) dibridged complexes formed by two azide groups or by both phenolate oxygen-azide, -thiocyanate, -carboxylate, or -cyanate groups

Tridentate/tetradentate Schiff base ligands L(1) and L(2), derived from the condensation of o-vanillin or pyridine-2-aldehyde with N,N-dimethylethylenediammine, react with nickel acetate or perchlorate salt and azide, cyanate, or thiocyanate to give rise to a series of dinuclear complexes of formulas [Ni(L(1))(micro(1,1)-N(3))Ni(L(1))(N(3))(OH(2))].H(2)O (1), [[Ni(L(1))(micro(1,1)-NCS)Ni(L(1))(NCS)(OH(2))][Ni(L(1))(micro-CH(3)COO)Ni(L(1))( NCS) (OH(2))]] (2) [[2A][2B]], [Ni(L(1))(micro(1,1)-NCO)Ni(L(1))(NCO)(OH(2))].H(2)O (3), and [Ni(L(2)-OMe)(micro(1,1)-N(3))(N(3))](2) (4), where L(1) = Me(2)N(CH(2))(2)NCHC(6)H(3)(O(-))(OCH(3)) and L(2) = Me(2)N(CH(2))(2)NCHC(6)H(3)N. We have characterized these complexes by analytical, spectroscopic, and variable-temperature magnetic susceptibility measurements. The coordination geometry around all of the Ni(II) centers is a distorted octahedron with bridging azide, thiocyanate/acetate, or cyanate in a micro(1,1) mode and micro(2)-phenolate oxygen ion for 1-3, respectively, or with a double-bridging azide for 4. The magnetic properties of the complexes were studied by magnetic susceptibility (chi(M)) versus temperature measurements. The chi(M) nus T plot reveals that compounds 1 and 4 are strongly ferromagnetically coupled, 3 shows a weak ferromagnetic behavior, and 2 is very weakly antiferromagnetically coupled.     

Multi-sensor approach in vessel magnetic wake imaging

Wake is the hydrodynamic footprint of a vessel at sea. The Earth’s magnetic field makes these footprints visible using magnetic sensors. Magnetic wakes induced by the motion of vessels may extend several kilometers and stay up long hours under certain conditions. From remote sensing point of view, in this work physical properties of this magnetic pattern are studied. A mathematical model is derived to simulate the magnetic wakes in a finite depth sea. Estimation of vessel traveling direction using single airborne sensors is reviewed and some problems in this method are remarked. A multi-sensor arrangement of magnetic transducers is proposed to remove these limitations. Estimation of vessel traveling direction with the proposed sensor configuration is performed. Robustness of the proposed method in dealing with Gaussian white noise and various target cutting angles is shown.     

Synthesis of Novel 1‐(Benzo[d]thiazol‐2‐yl)‐1H‐pyrrol‐2(5H)‐ones

The titled products comprising of two mutually merged bioactive nucleuses, 2‐aminobenzo[d]thiazole and 2,5‐dihydropyrrole rings, were obtained from the reaction between dialkyl acetylenedicarboxylates and alkyl 2‐(benzo[d]thiazol‐2‐yl)amino‐2‐oxoacetates in the presence of triphenylphosphine at RT.     

One‐Pot Synthesis of Sulfonamides and Sulfonyl Azides from Thiols using Chloramine‐T

A convenient synthesis of sulfonamides and sulfonyl azides from thiols is described. In situ preparation of sulfonyl chlorides from thiols was accomplished by oxidation with chloramine‐T (=N‐chlorotosylamide=N‐chloro‐4‐methylbenzenesulfonamide), tetrabutylammonium chloride (Bu₄NCl), and H₂O. The sulfonyl chlorides were then further allowed to react with excess amine or NaN₃ in the same pot.     

An Expedient Synthesis of Novel Derivatives of Pyrido[2,3‐d]pyrimidines Using Magnetically Supported ZrO2 Nanocatalyst

An efficient synthesis of pyrido[2,3‐d]pyrimidine derivatives via one‐pot multicomponent reactions of 6‐amino‐2‐(alkylthio)pyrimidin‐4(3H)‐one, 3‐cyanoacetylindole and arylaldehydes using [Fe₃O₄@ZrO₂] as magnetically recyclable nanocatalyst is reported. This protocol furnished the desired products in good to excellent yields (70–93 %) and lower reaction times. The catalyst could be easily and efficiently separated from the final product solution by an external magnet and be reused in 5 consecutive runs without any significant activity decrease.     

Investigating the effects of nanoparticles mean diameter on laminar mixed convection of a nanofluid through an inclined tube with circumferentially nonuniform heat flux

In this study, laminar mixed convection of a water-based nanofluid containing Al₂O₃ nanoparticles in an inclined copper tube, which is heated at the top half surface, is investigated numerically. A heat conduction mechanism through the tube wall was implemented. Three-dimensional equations using a two-phase mixture model were solved to investigate the hydrodynamic and thermal behaviors of the nanofluid over a wide range of nanoparticle volume fractions. To verify the model, the results were compared with previous works and a good agreement between the results was observed. The effect of nanoparticles diameter on the hydrodynamic and thermal parameters over a wide range of Grashof numbers is presented and discussed for a particle volume fraction and Reynolds number. It is shown that the diameter of nanoparticles affects the particle distribution in the cross section perpendicular to the tube axis, heat transfer coefficient, and shear stress.     

A rare ferromagnetically coupled asymmetric doubly azido bridged copper(II) dimer with an N,N, O donor Schiff base

A new end-to-end (EE) doubly azido bridged dinuclear complex [Cu₂L₂(μ_1,3-N₃)₂] (1) [where L = (E)-4-(2-(dimethylamino)ethylimino)-1,1,1-trifluoropentan-2-one)] has been synthesized and characterized by elemental and spectroscopic techniques. Single crystal X-ray diffraction analysis reveals that the dimeric complex possesses a center of inversion. Each copper atom in 1 is in a distorted square pyramidal geometry with a CuN₄O chromophore as revealed from the τ value, 0.19. The four basal positions are occupied by two imine N and one keto O atom of the Schiff base and one N atom from the azide anion. Another N atom from a coordinated azide occupies the apical position. Temperature dependent magnetic susceptibility of 1 was fitted using the Bleaney–Bowers expression which led to the parameters J = 13.6 cm⁻¹ and R = 3.4 × 10⁻⁵. It indicates a ferromagnetic interaction through the double azido bridges connecting the individual copper Schiff base units.     

Improving the Morphological Parameters of Aluminum Foam for Maximum Sound Absorption Coefficient using Genetic Algorithm

Fabricating of metal foams with desired morphological parameters including pore size, porosity and pore opening is possible now using sintering technology. Thus, if it is possible to determine the morphology of metal foam to absorb sound at a given frequency, and then fabricate it through sintering, it is expected to have optimized metal foams for the best sound absorption. Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient. In this study, the Lu model was used to optimize the morphological parameters of Aluminum metal foam for the best sound absorption coefficient. For this purpose, the Lu model was numerically solved using written codes in MATLAB software. After validating the proposed codes with benchmark data, the genetic algorithm (GA) was applied to optimize the affecting morphological parameters on the sound absorption coefficient. The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz. The optimized parameters ranged from 50% to 95% for porosity, 0.1 mm to 4.5 mm for pore size, and 0.07 mm to 0.6 mm for pore opening size. The result of this study was applied to fabricate the desired Aluminum metal foams for the best sound absorption. The novel approach applied in this study, is expected to be successfully applied in for best sound absorption in desired frequencies.     

Synthesis of poly(2‐hydroxyethyl methacrylate)‐based molecularly imprinted polymer nanoparticles containing timolol maleate: morphological,thermal, and drug release along with cell biocompatibility studies

This work was aimed to synthesize and characterize poly(2‐hydroxyethyl methacrylate) [poly (HEMA)]‐based molecularly imprinted polymer nanoparticles (MIP NPs) containing timolol maleate (TM) via precipitation polymerization. The molecular structures of the MIP and non‐imprinted polymer (NIP) NPs were compared by means of Fourier transform infrared spectroscopy. The morphological observations by using scanning electron microscopy and transmission electron microscopy confirmed the formation of MIP NPs as small as 128 nm in average diameter with appropriate synthesis conditions. Thermal behaviors of the samples were also studied by the use of thermogravimetric analysis and differential scanning calorimetry. By considering a series of key factors such as monomer : template ratio, cross‐linker type, pH, and temperature, the sample with promising characteristics was found to be that of HEMA : TM ratio of 10:1, 40 mmol of ethylene glycol dimethacrylate as cross‐linker, and polymerization temperature of 60°C in acetonitrile as porogenic solvent. Furthermore, the ultraviolet‐visible (UV‐vis) spectrophotometry results proved a controlled release of TM from the MIP NP samples compared with NIP ones at extended periods. Moreover, the cytotoxicity of the MIP and NIP NPs samples was evaluated on mesenchymal stem cells, and the obtained observations showed that they had no adverse side effect on the living cells; especially the surface of the MIP NPs sample depicted highly cell's biocompatibility. Finally, the outcomes from designed different experiments conducted us that the HEMA‐based MIP NPs have great potential as an ocular nanocarrier for TM delivery. Copyright © 2016 John Wiley & Sons, Ltd.