Dicyanobiphenyl polysioloxane stationary phases for capillary column gas chromatography

Summary The chromatographic performance of newly developed dicyanobiphenyl polysiloxane stationary phases were evaluated and compared with the performance of other polar stationary phases, including the previously reported monocyanobiphenyl polysiloxanes. Due to the unique combination of polarizable biphenyl and polar cyano functionalities in the side chains of the flexible polysiloxane backbone, and by virtue of their mild liquid crystalline properties, the new stationary phases provide excellent resolution of a wide variety of analytes, both polar and nonpolar, in both GC and SFC. They can be easily coated and cross-linked in open tubular columns, and the resultant columns demonstrate excellent efficiency and performance at temperatures up to 280–300°C. The new stationary phases exhibit enhanced selectivities for various types of isomeric compounds.     

FLUORESCENCE SPECTRAL CHANGES OF HEMATOPORPHYRIN DERIVATIVE UPON BINDING TO LIPID VESICLES, Staphylococcus aureus AND Escherichia coli CELLS

Abstract— The binding of hematoporphyrin derivated (Hpd) to lipid vesicles and bacterial membranes was determined by fluorescence spectroscopy. The fluorescence measurements of Hpd in aqueous solutions showed two bands at 613 and 677 nm. In lipid environments of lecithin vesicles the fluorescence spectrum was shifted to 631 and 692 nm, respectively. Hpd was rapidly bound to the cell membrane of Staphylococcus aureus while much less binding occurred in the presence of Escherichia coli. At the same time, spheroplasts of both bacteria were shown to bind Hpd to a similar extent. These results are well correlated with the photoinactivation of the gram positive bacteria with Hpd while the gram negative cells were shown to be resistant. The pH dependence of both Hpd binding to S. aureus as well as the photodynamic inhibitory effect of the same bacteria are similar. It is concluded that the segregation of Hpd to the cell membrane is a prerequisite for its photodynamic effect.     

Bactericidal effects of photoactivated porphyrins--an alternative approach to antimicrobial drugs

Photoactivated porphyrins display a potent cytotoxic activity towards a variety of Gram positive bacteria, mycoplasma and yeasts, but not Gram negative cells. The prerequisite for photosensitization of a microbial cell is the binding of porphyrin to the cytoplasmic membrane in a pH-dependent manner. On illumination, the membrane bound, and possibly, cytoplasmic porphyrin molecules generate singlet oxygen and radicals which sensitize biomolecules and lead to cell death. The immediate inhibition of cell growth on photodynamic treatment is accompanied by alterations in cell wall and membrane synthesis, leading to the formation of large mesosomes adjacent to the unaccomplished septa. Hemin bound to microbial cells exerts cytotoxic activity by peroxidative and oxidative reactions independent of light. Future research in the field may enhance the possibility of using porphyrin photosensitization for treatment of microbial infections. Such clinical use will be unrelated to the antibiotic resistance of the pathogen. Resistance of Gram negative bacteria to porphyrin photosensitization is the main impediment to its use as a broad spectrum antibacterial method.     

Column preconcentration of trace manganese with the ion pair of 2-nitroso-1-naphthol-4-sulfonic acid tetradecyldimethylbenzyl-ammonium chloride supported on naphthalene and determination by derivative spectrophotometry

A column preconcentration method has been developed for the determination of trace amounts of manganese by preconcentration on 2-nitroso-1-naphthol-4-sulfonic acid (nitroso-S)-tetradecyldimethylbenzylammonium (TDBA) naphthalene as an adsorbent using a simple funnel tipped glass tube. Manganese reacts with nitroso-S to form a water soluble brown colored chelate anion. The chelate anion forms a water insoluble Mn-Nitroso-S-TDBA ion pair on naphthalene packed in a column in the pH range 9.6-10.5 at a flow rate of 1-2 ml/min. The solid mass consisting of manganese complex and naphthalene is dissolved in 5 ml of dimethylformamide (DMF) and the metal determined by second derivative spectrophotometry. The calibration curve is linear in the concentration range 0.25-35.0 micrograms of Mn in 5 ml of the final DMF solution. Eight replicate determinations of 25 micrograms of standard manganese solution give a mean peak height of 4.0 with a correlation coefficient of 0.9995 and relative standard deviation of +/- 1.1%. The sensitivity was calculated to be 0.502(d2 A/d lambda 2)/microgram ml-1 from the slope of the calibration curve. The detection limit was 0.020 microgram ml-1 for manganese at the minimum instrumental settings (signal to noise ratio = 2). Various parameters effecting the method such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of manganese have been evaluated to optimize the conditions for its determination in standard alloys and biological samples.     

PHTHALOCYANINE-INDUCED PHOTOHEMOLYSIS: STRUCTURE-ACTIVITY RELATIONSHIP AND THE EFFECT OF FLUORIDE

Abstract— Phthalocyanine (Pc) containing AI, Ga or Zn as central metal ligand and substituted with a varying number of sulfonic acid residues as well as additional benzene rings were synthesized and their photodynamic activity was assayed using photohemolysis of human erythrocytes as an endpoint. The Pc derivatives vaned > 300-fold in their photodynamic activity. Activity corrclated with binding of the dye to the cell, with the exception of some of the amphiphilic dyes where cell uptake was an order of magnitude higher than expected from the observed activity. Fluoride was shown to inhibit AIPcS_n-induccd photohemolysis. This effect occurred also with other AlPc and GaPc derivatives, but the concentration of F required to slow photohemolysis by a factor of two (K_i) varied between 4 μ M and 10 mM. Fluorescence spectral studies indicated complex formation between F⁻ and the dye, which was stronger for AlPc than GaPc derivatives. Ultrastructural studies using scanning electron microscopy showed that the photosensitized cells were converted to spherocytes and that F⁻ prevented this to a large extent.     

Fused silica capillary micro-packed columns in gas chromatography

Summary Flexibility, strength and adsorption inertness of fused-silica capillaries permits their extensive application for the preparation of micro-packed columns in gas chromatography. Decreasing the column diameter (from 0.5 to 0.15 mm) and the diameter of the sorbent particles (from 100 to 5 μm) results in a marked reduction of the height equivalent to a theoretical plate (HETP), as well as in diminishing the dependence of the HETP on the carrier gas flow rate. The chromatographic characteristics of fused-silica capillary micro-packed columns and open-tubular columns are compared. The fused-silica capillary micro-packed column can be used to advantage for performing rapid and trace analyses and have been shown to be adapted for application in gas-solid chromatography. Separation of organic and inorganic compounds on fused-silica capillary micro-packed columns is illustrated by practical examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Efficient transesterification/acylation reactions mediated by N-heterocyclic carbene catalysts

Imidazol-2-ylidenes, a family of N-heterocyclic carbenes (NHC), are efficient catalysts in the transesterification involving numerous esters and alcohols. Low catalyst loadings of aryl- or alkyl-substituted NHC catalysts mediate the acylation of alcohols with enol acetates in short reaction times at room temperature. Commercially available and more difficult to cleave methyl esters react with primary alcohols in the presence of alkyl-substituted NHC to efficiently form the corresponding esters. While primary alcohols are selectively acylated over secondary alcohols with use of enol esters as acylating agents, methyl and ethyl esters can be employed as protective agents for secondary alcohols in the presence of the more active alkyl-substituted NHC catalysts. The NHC-catalyzed transesterification protocol was simplified by generating the imidazol-2-ylidene catalysts in situ.     

Chemometric data analysis of pollutants in wastewater—a case study

In this study, chemometric techniques such as cluster analysis (CA), discriminant analysis (DA), principal component analysis (PCA) and partial least squares (PLS) were used to analyse the wastewater dataset to identify the factors which affect the composition of sewage of domestic origin, spatial and temporal variations, similarity/dissimilarity among the wastewater characteristics of cis- and trans-drains and discriminating variables. Samples collected from 24 wastewater drains in Lucknow city and from three sites on Gomti river in the month of January/February, May, August and November during the period of 5 years (1994-1999) were characterized for 32 parameters. The multivariate techniques successfully described the similarities/dissimilarities among the sewage drains on the basis of their wastewater characteristics and sources signifying the effect of routine domestic/commercial activities in respective drainage areas. Spatial and seasonal variations in wastewater composition were also determined successfully. CA generated six groups of drains on the basis of similar wastewater characteristic. PCA provided information on seasonal influence and compositional differences in sewage generated by domestic and industrial waste dominated drains and showed that drains influenced by mixed industrial effluents have high organic pollution load. DA rendered six variables (TDS, alkalinity, F, TKN, Cd and Cr) discriminating between cis- and trans-drains. PLS-DA showed dominance of Cd, Cr, NO₃, PO₄ and F in cis-drains wastewater. The results suggest that biological-process based STPs could treat wastewater both from the cis- as well as trans-drains, however, prior removal of toxic metals will be required from the cis-drains sewage. Further, seasonal variations in wastewater composition and pollution load could be the guiding factor for determining the STPs design parameters. The information generated would be useful in selection of process type and in designing of the proposed sewage treatment plants (STPs) for safe disposal of wastewater.     

On-chip electrochromatography using sol-gel immobilized stationary phase with UV absorbance detection

A chromatography column on a chip was fabricated by immobilizing reversed-phase stationary phase particles (5 microm, C4) using sol-gel technology. Channels were fabricated in quartz using photolithography and wet etching. Localization of the stationary phase was achieved by immobilizing the stationary phase at the desired location in the separation channel prior to bonding of the cover plate. Cross channel design was employed for gated injection. An optical fiber setup was developed for carrying out on-chip UV absorbance detection. The effective optical path length was theoretically determined for the trapezoidal shaped channel and the result was shown to match closely with the experimentally determined value. The effect of applied voltage on velocity was evaluated using thiourea as an unretained marker. Separation performance of the stationary phase was demonstrated by separation of three peptides (Trp-Ala, Leu-Trp and Trp-Trp) under isocratic chromatographic conditions.