A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

The Raman active internal vibrational modes of potassium nitrate

The Raman active internal vibrational modes of single crystal orthorhombic potassium nitrate have been studied in various polarizations. The full multiplet structure predicted by factor group analysis for the v₂ and v₃ regions has been observed for the first time. The expected site group splitting of the v₄ mode was not observed and can be assumed to be less than 0.5 cm^?1.     

Multivalent ion/polyelectrolyte exchange processes in exponentially growing multilayers

We show, in this paper that multivalent ferrocyanide anions can penetrate into exponentially growing (PGA/PAH)n multilayer films whatever the nature of the last deposited layer. These ions are not able to diffuse out of the film when it is brought in contact with a pure buffer solution. However, the contact of this film with a poly(allylamine) (PAH) or a poly(L-glutamic acid) (PGA) solution leads to the release of ferrocyanide ions from the multilayer. It is shown that the release of ferrocyanide anions, when the film is in contact with a PGA solution, is due to the diffusion of the PGA chains into the film so that an exchange between ferrocyanide ions and PGA chains takes place inside the film. On the other hand, PAH chains do not diffuse into PGA/PAH multilayers. When the film is then brought in contact with a PAH solution, the PAH chains from the solution are expected to strongly interact with the ferrocyanide ions and thus induce a diffusion mechanism of the multivalent anions out of the film, the film/solution interface playing the role of a sink for these ions. This work thus shows that interactions between multivalent ions and exponentially growing films are much more complex than expected at first sight and that polyelectrolyte multilayers must be seen as dynamic entities in which diffusion and exchange processes can take place.     

Role of the spacer in the singlet-singlet energy transfer mechanism (Förster vs Dexter) in cofacial bisporphyrins

The cofacial bisporphyrins H4DPS (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), H4DPO (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), H4DPX (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), H4DPA (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), and H4DPB (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene) have been monometalated by Zn(OAc)2.2H2O and by GaCl3 to explore the singlet-singlet energy transfer from the photoexcited metal porphyrin center to the linked free base porphyrin. The spectroscopic (UV-vis and fluorescence) and photophysical properties (fluorescence lifetimes, tauF, and quantum yields, phiF) have been investigated at 298 and 77 K in degassed 2-MeTHF for the donor-acceptor systems, (Zn)H2DPS, (Zn)H2DPO, (Zn)H2DPA, (Zn)H2DPX, and (Zn)H2DPB, as well as for the bis-zinc complexes, (Zn)2DPS, (Zn)2DPO, (Zn)2DPX, and (Zn)2DPB, respectively, and the monoporphyrin derivatives, H2P, (Zn)P, and (Ga-OMe)P (P2- = 5-phenyl-2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrin-dianion). The singlet-singlet energy transfer rate constants (KET) were obtained using KET = (1/tauF -1/tauFo), where tauFo is the fluorescence lifetime of the corresponding bis-zinc(II) systems (or (Zn)P and (Ga-OMe)P) where no energy transfer occurs. The tauF value for three bis-zinc(II) compounds varies from 1.69 to 2.01 ns and is 1.84 (at 298 K) and 3.20 ns (at 77 K) for (Ga-OMe)P. In the donor-acceptor bismacrocycles, depending on the spacer and the temperature, the fluorescence lifetimes decrease down to 50-240 ps. The KET values range from approximately 4 to approximately 21 (ns(-1)) and have been analyzed considering both the F?rster and the Dexter mechanisms. Using the C(meso)-C(meso) distance parameters in the calculations, the F?rster and Dexter mechanisms operate for DPS and DPO, and for DPA, DPX, and DPB spacer systems, respectively. The limit distance where one mechanism dominates over the other is estimated to be around 5-6 A.     

The influence of the purine 2-amino group on DNA conformation and stability-II: Synthesis and physical characterization of d[CGT(2-NH2)ACG], d[CGU(2-NH2)ACG], and d[CGT(2-NH2)AT(2-NH2)ACG]

Synthesis of an N-protected derivative of 2-amino-2'-deoxyadenosine (dA') from 2'-deoxyguanosine is reported. The syntheses of several oligodeoxynucleotides containing this modified nucleoside are described, together with physical characterization via melting studies and CD conformational analysis. As expected, the 2-amino group is seen to add to the duplex stability. Although the sequence d(TA')₃ was found to undergo a salt-induced conformational transition, mixed sequences such as d(CGTA'CG) did not display this behavior. All guanine residues present in these sequences were O⁶ protected, either with the cyanoethyl group or the 4-nitrophenylethyl group, to eliminate guanine degradation during phosphorylation and condensation reactions. Procedures for the introduction and removal of these O⁶ protecting groups are described.     

Synthesis of new OBAN's and further studies on positioning of the catalytic group

Two new zinc ion dependent oligonucleotide based artificial nucleases (OBAN's) have been synthesized. These consist of 2'-O-methyl modified RNA oligomers conjugated to 5-amino-2,9-dimethylphenanthroline (neocuproine)via a urea linker. OBAN 4 carries the catalytic group on a linker extending from the C-4 of an internal cytosine moiety. OBAN 5 has two neocuproine units attached, each to linkers extending from the C-5 position of uridine moieties, one placed internally and the other at the at the 5'-end of the oligonucleotide. The key step in the synthesis of the OBAN systems is conjugation of the catalytic group to the respective amino linkers of the modified oligonucleotides. This is achieved by first converting the 5-amino-2,9-dimethylphenanthroline to the phenylcarbamate. The reaction of this neocuproine phenylcarbamate with the oligonucleotide carrying one or two primary aliphatic amines in aqueous buffer (at pH 8.5) leads to nearly quantitative formation of the urea-linked conjugates. Both OBAN systems were found to cleave RNA in the bulged out regions formed from the non-complementary part of the target sequences, in the presence of Zn(II) ions. Differences in efficiency between these and previously reported systems are discussed.     

Novel resorcinarene-based pH-triggered gelator

Iminodiacetate resorc[4]arene is shown to produce gels that are pH-reversible. The gels formed are clear and stable to inversion. (The gels are not stable above a certain temperature, which varies with concentration.) When the pH of an iminodiacetate resorc[4]arene solution (concentration > 7.6 mM) is lowered to below 2.5, which is near one of the Ka values of the molecule, the dissolved molecules aggregate and cause gelation of water. 1H NMR showed that at the pH of gelation a change occurs in the chemical environment of the iminodiacetate group. Scanning electron microscopy showed that the gel is composed of long strands that interweave and create a molecular mesh.     

The role of surface oxides in formic acid oxidation on Au

Compared to Pt or Pd electrodes, Au is a poor catalyst for the direct anodic oxidation of HCOOH, but the formation of Au surface oxides in acidic solutions is accompanied by a fast oxidation of HCOOH. This fast reaction is not simply a secondary reaction of Au surface oxides since those oxides are kinetically stable in HCOOH solutions. They do oxidize HCOOH only via a slow and purely electrochemical process which occurs on free Au sites and is “driven” by oxide reduction. The fast HCOOH oxidation is due to a highly reactive intermediate which is able either to form stable Au oxides Au_nO_m or to react with HCOOH. Our results are consistent with the model that by the charge transfer step a reactive non-equilibrium {Au…O> species is formed which converts to stable equilibrium oxides Au_nO_m after migration and rearrangement steps. Pre-equilibrium <Au…O> oxidizes HCOOH and this oxidation is of lower order with respect to <Au…O> compared with the formation of Au_nO_m.     

An alternative sampling algorithm for use in liquid chromatography/tandem mass spectrometry experiments

In liquid chromatography/tandem mass spectrometry (LC/MS/MS) analyses of complex peptide mixtures, dynamic exclusion functions are used to minimize repeat selections of identical precursors for collision induced dissociation (CID). We describe a new algorithm for the dynamic exclusion of m/z values during LC/MS/MS. Full-scan based peak exclusion (Fulspec) uses a simplified model of chromatographic peak formation to detect and exclude contaminants present throughout the run or that lead to broad peaks. Therefore, instead of excluding peptides from fragment analysis according to a rigidly predefined time window, the chromatographic properties of the detected analytes are used. The algorithm was tested on two datasets derived from previously published experiments. Fulspec achieves a distribution of CID spectra with minimal tailing on the retention time axis, without resorting to rigid exclusion of m/z values. The procedure further excludes intensities with a bias towards low-quality CID spectra. This combination frees up valuable analytical capacity. The underlying intensity vs. quality analyses challenge the assumption that abundant precursors automatically give the best identifications. Further validation of the algorithm will require its incorporation by equipment manufacturers into the instrument control programs.     

Graphite furnace atomic absorption spectrometric determination of ruthenium in iron meteorites

A procedure for the determination of ruthenium in iron meteorites involves its oxidation to RuO₄ by sodium periodate in hydrochloric acid and extraction of the tetroxide into chloroform. Various parameters of the method were studied: sample dissolution, optimum amount of oxidant, shaking time, distribution ratio and stability of the complex. The relative standard deviation assessed from replicate analyses of the North Chile iron meteorite was 6.6%. There are no certified standards for iron meteorites, but the value of 20.0 μg g^? obtained for this meteorite compares well with a reported abundance of 19.3 μg g^?1 obtained by radiometric neutron-activation analysis (RNAA). The analysis of 15 meteorites that had previously been analysed by RNAA gave values averaging 11% below those reported by the latter method, but within the standard deviation of the RNAA data. It is considered that the present method is a more practical alternative to RNAA for the determination of ruthenium in iron meteorites.