Hexacyanocobaltate(III) anions as precursors of Co(II)-Ni(II) cyano-bridged multidimensional assemblies: hydrothermal syntheses, crystal and powder X-ray structures, and magnetic properties

Three novel cyanide-bridged heterobimetallic coordination polymers have been synthesized by hydrothermal routes, in superheated water solutions, by using K3[Co(CN)6], NiCl2.6H2O, and alpha-diimine ligands: [Ni(CN)4Co(phen)] (1; phen = 1,10-phenanthroline), [Ni(CN)4Co(2,2'-bipy)] (2; 2,2'-bipy = 2,2'-bipyiridine), and [Ni(CN)4Co(2,2'-bipy)2] (3). The isostructural compounds 1 and 2 contain a two-dimensional network with Co(II) centers octahedrally coordinated by one chelating 2,2'-bipy ligand and four cyanide groups of four distinct [Ni(CN)4]2-, through crystallographically equivalent, bridging units. Compound 3 contains one-dimensional zigzag chains in which the Co(II) ion is coordinated by two chelating 2,2'-bipy ligands and two cyanides from two different [Ni(CN)4]2- units cis to each other. These compounds have been fully characterized by single-crystal or unconventional powder X-ray diffraction analyses and variable-temperature magnetic measurements.     

Effect of Showerhead Configuration on Coherent Raman Spectroscopically Monitored Pulsed Radio Frequency Plasma Enhanced Chemical Vapor Deposited Silicon Nitride Thin Films

The effect of showerhead design, number of holes and geometry, in a parallel plate reactor was studied by measuring the concentration of silane reactant by coherent anti-Stokes Raman scattering (CARS) spectroscopy as a function of radio frequency (rf) pulse width and peak power during pulsed power plasma enhanced chemical vapor deposition (PECVD) of silicon nitride thin films. Film deposition rate, stress, SiH/NH ratio, and thickness and index of refraction homogeneity were correlated with the change in silane concentration for each of the three head geometries: radial, square, and asymmetrical. The asymmetrical head caused plasma quality problems which affected the films' qualities. The square pattern showed good mixing qualities, but produced a film with high compressive stress. The radial head provided the most homogenous film, with respect to index of refraction and film thickness. With a 10 ms pulse width, however, the radial head plasma acted as a continuous plasma for depletion and stress data. The showerhead geometry affects plasma qualities, like stability and intensity, and reactant gas velocities, which in turn affect the nitride film thickness, nitride composition, and stress.     

Cyclopentathiadiazines, new heterocyclic materials from cyclic enaminonitriles

Indene and cyclopentene enaminonitriles were reacted with SCl2, iBu3N and NCS to give the first cyclopenta[1,2,6]thiadiazines that showed unusual characteristics, one as a NIR dye and another as a liquid crystal.     

Generation and fate of free radicals of Δ2-oxazolin-5-ones

The reaction of Δ² -oxazolin-5-ones 1a and 1b with nickel peroxide in benzene produces the corresponding 4,4-dehydrodimers 5a and 5b as the main products in yields over 75%. Under the same conditions, the 2-aryl -4-methyl - Δ²-oxazolin-5-ones 1c, 1d and 1e yield five products. In the case of 1c, the constituents of the product mixture were separated and identified as two 4,4-dehydrodimers ( meso and d] pair isomers) 5c and 5c', (40.7%), 2,4-dehydrodimer 6c (34.9%), acetylanisoylimide 8c (8.5%) and anisamide (15.9%). Adequate mechanistic schemes are discussed to account for the products formed.     

PCDD, PCDF, and PCB contamination of air and inhalable particulate in Rome

Summary The isomer specific determination of PCDD, PCDF and PCB was carried out on samples of air and inhalable particulate from Rome. Samples were taken daily for six months and pooled to yield two samples per month. Normal PCDD+PCDF concentrations expressed in TEQ ranged from 48 to 87 fg/m³, while total PCB ranged from 0.1 to 1.4 ng/m³. The 2, 3, 7, 8-substituted PCDD and PCDF congener pattern is shown together with the PCB congener pattern.     

Miniemulsion copolymerization of styrene–methyl methacrylate

Miniemulsion copolymerization of 50 : 50 weight fraction of styrene–methyl methacrylate monomer, using hexadecane as the cosurfactant, was carried out in both unseeded and seeded polymerizations. Effects of the hexadecane concentration and the ultrasonification time on the conversion–time curves and particle size of the final latex were investigated for unseeded polymerization. The kinetic and particle size distribution results showed that an increase in hexadecane concentration and ultrasonification time cause faster polymerization rate and smaller particle size. The mechanism of mass transport from miniemulsion droplets to polymer particles was also investigated for seeded polymerization. For this purpose a monomer miniemulsion was mixed with a fraction of a previously prepared miniemulsion latex particles prior to initiation of polymerization, using residual oil-soluble initiator in the seed latex. The concentration of hexadecane and a water-insoluble inhibitor (2,5 di-tert-butyl hydroquinone) in the miniemulsions were the main variables. Seeded polymerizations were also carried out in the presence of miniemulsion droplets containing a water-insoluble inhibitor and water-soluble initiator. The inhibitor concentration and the agitation speed during the course of polymerization were the experimental variables. The kinetic and particle size results from these seeded experiments suggested that collision between miniemulsion droplets and polymer particles may play a major role in the transport of highly water-insoluble compounds.     

Determination of fat-soluble vitamins in yogurt by HPLC with electrochemical detection

A method employing HPLC with electrochemical detection for the rapid and simultaneous determination of vitamins A, D(3) and E is described. The method uses a C-18 reverse phase column and 2.5 mM HAcO-NaAcO in methanol-water (99:1, v/v) solution as the mobile phase. The compounds are quantified using amperometric detection with a glassy carbon electrode at a potential of + 1300 mV (vs. Ag/AgCl) and the results are compared with those obtained using UV detection at a wavelength of 280 nm. The method was successfully applied to the analysis of vitamins A, D(3) and E in yogurt samples. After saponification, fat-soluble vitamins were extracted and the methanolic solution of the extracts was injected directly into the chromatographic system, avoiding the clean-up step which is necessary when no electrochemical detection is used. Good recovery percentages were obtained.     

From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

Dissociation constants of carboxymethyloxysuccinic acid

The dissociation constants of carboxymethyloxysuccinic acid (CMOS) have been measured at 25° and an ionic strength of 0·1M in sodium perchlorate. The values found were: pK₁ = 2·52, pK₂ = 3·77 and pK₃ = 5·00. CMOS is thus seen to be rather stronger than its isomer citric acid.     

Activation of gold on titania: adsorption and reaction of SO(2) on Au/TiO(2)(110)

Synchrotron-based high-resolution photoemission and first-principles density-functional slab calculations were used to study the interaction of gold with titania and the chemistry of SO(2) on Au/TiO(2)(110) surfaces. The deposition of Au nanoparticles on TiO(2)(110) produces a system with an extraordinary ability to adsorb and dissociate SO(2). In this respect, Au/TiO(2) is much more chemically active than metallic gold or stoichiometric titania. On Au(111) and rough polycrystalline surfaces of gold, SO(2) bonds weakly and desorbs intact at temperatures below 200 K. For the adsorption of SO(2) on TiO(2)(110) at 300 K, SO(4) is the only product (SO(2) + O(oxide) --> SO(4,ads)). In contrast, Au/TiO(2)(110) surfaces (theta;(Au) < or = 0.5 ML) fully dissociate the SO(2) molecule under identical reaction conditions. Interactions with titania electronically perturb gold, making it more chemically active. Furthermore, our experimental and theoretical results show quite clearly that not only gold is perturbed when gold and titania interact. The adsorbed gold, on its part, enhances the reactivity of titania by facilitating the migration of O vacancies from the bulk to the surface of the oxide. In general, the complex coupling of these phenomena must be taken into consideration when trying to explain the unusual chemical and catalytic activity of Au/TiO(2). In many situations, the oxide support can be much more than a simple spectator.