Vibro-acoustic noise control treatments for payload bays of launch vehicles: Discrete to fuzzy solutions

Sound transmitted through an enclosing structure into a cavity has been minimised by optimising the locations, numbers and properties of tuned mass dampers placed on the structure and Helmholtz resonators placed in the cavity. Most of the results presented in the literature show the effect of a few well selected acoustic or vibration absorbers on simple vibro-acoustic systems, whereas the results presented here indicate the trends that occur when a few absorbers are replaced by a large number. The results indicate that for low numbers of absorbers, the result of the optimal configuration is to reduce the response of discrete modes, and for a large number of absorbers the result of the optimal configuration is a tendency for the vibro-acoustic energy to be smeared over a range of frequencies, which is similar to the results seen in fuzzy structures. The enormous computational task was achieved using a distributed computing network and an asynchronous parallel genetic algorithm.     

Influence of multiwall carbon nanotube (MWCNT) dispersion on ignition of poly(dimethylsiloxane)–MWCNT composites

Poly(dimethylsiloxane) (PDMS) filled with low contents of multiwall carbon nanotubes (MWCNT) was prepared using different ways to monitor the dispersion of MWCNT. The influence of the dispersion on thermal conductivity and transmittance was measured. High degree of transparence can be achieved with 0.02 phr of well dispersed MWCNT. Time‐to‐ignition (TTI) was also measured on 2‐ or 4‐mm‐thick specimens heated using radiative unidirectional source. Time‐to‐ignition was found to decrease with the incorporation of MWCNT because more heat is absorbed at the surface. Higher time‐to‐ignition was observed for partially translucent composites, due to different absorption in‐depth profiles. It can be assumed that time‐to‐ignition can be controlled by the dispersion of MWCNT into the polymeric matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

Lanthanide Complexes with Multidentate Oxime Ligands as Single‐Molecule Magnets and Atmospheric Carbon Dioxide Fixation Systems

The synthesis, structure, and magnetic properties of five lanthanide complexes with multidentate oxime ligands are described. Complexes 1 and 2 ( 1 : [La₂(pop)₂(acac)₄(CH₃OH)], 2 : [Dy₂(pop)(acac)₅]) are synthesized from the 2‐hydroxyimino‐N‐[1‐(2‐pyridyl)ethylidene]propanohydrazone (Hpop) ligand, while 3 , 4 , and 5 ( 3 : [Dy₂(naphthsaoH)₂(acac)₄H(OH)]?0.85 CH₃CN?1.58 H₂O; 4 : [Tb₂(naphthsaoH)₂(acac)₄H(OH)]?0.52 CH₃CN?1.71 H₂O; 5 : [La₆(CO₃)₂(naphthsao)₅ (naphthsaoH)_0.5(acac)₈(CO₃)_0.5(CH₃OH)_2.76H_5.5(H₂O)_1.24]?2.39 CH₃CN?0.12 H₂O) contain 1‐(1‐hydroxynaphthalen‐2‐yl)‐ethanone oxime (naphthsaoH₂). In 1 – 4 , dinuclear [Ln₂] complexes crystallize, whereas hexanuclear La^III complex 5 is formed after fixation of atmospheric carbon dioxide. Dy^III‐based complexes 2 and 3 display single‐molecule‐magnet properties with energy barriers of 27 and 98 K, respectively. The presence of a broad and unsymmetrical relaxation mode observed in the ac susceptibility data for 3 suggest two different dynamics of the magnetization which might be a consequence of independent relaxation processes of the two different Dy³⁺ ions.     

Enhanced UV photosensing properties of ZnO nanowires prepared by electrodeposition and atomic layer deposition

A new process enabling the synthesis of zinc oxide (ZnO) and Al-doped ZnO nanowires (NWs) for photosensing applications is reported. By combining atomic layer deposition (ALD) for the seed layer preparation and electrodeposition for the NW growth, high-quality ZnO nanomaterials were prepared and tested as ultraviolet (UV) sensors. The obtained NWs are grown as arrays perpendicular to the substrate surface and present diameters between 70 and 130 nm depending on the Al doping, as seen from scanning electron microscopy (SEM) studies. Their hexagonal microstructure has been determined using X-ray diffraction and Raman spectroscopy. An excellent performance in UV sensing has been observed for the ZnO NWs with low Al doping, and a maximal photoresponse current of 11.1 mA has been measured. In addition, initial studies on the stability have shown that the NW photoresponse currents are stable, even after ten UV on/off cycles.     

Effect of particle polydispersity on particle concentration measurement by using laser Doppler anemometry

Measurement of particle concentration by laser Doppler anemometry (LDA) is studied on a vertical air jet seeded by a powder disperser with controlled particle and air flow rates. Particle arrival rate is utilized to retrieve particle number densities from conventional LDA operation. The effect of polydisperse nature of the particles is assessed. Comparisons between measured and estimated particle number densities suggest that only a certain portion of the particle population with a particle size to fringe spacing ratio around unity can be detected. Results indicate that reliable measurement of absolute particle concentration is possible for a particle population of narrow size distribution with an average diameter equivalent to fringe spacing. Present number density measurement technique which is useful for practical purposes with conventional LDA systems is found to yield physically reasonable profiles in both laminar and turbulent regimes.     

Charging megadalton poly(ethylene oxide)s by electrospray ionization. A charge detection mass spectrometry study

Ions from compounds of megadalton (MDa) molecular weight were produced in an electrospray ionization source from solutions of poly(ethylene oxide) (PEO) samples with average molecular weights ranging from 1,000,000 to 7,000,000 Da. Charge detection mass spectrometry (CDMS) has been used to determine the mass of the MDa PEOs. Simultaneous measurement of the charge and velocity of individual ions allows the mass determination of the ion, after calibration of the instrument with independent samples. In addition to the mass spectra, CDMS generates charge-versus-mass plots, which allow investigation of the charging of electrosprayed ions over a broad range of masses. The experimental charging capacity of MDa PEOs is compared with a simple model based on the affinity of alkali cations for oxygen sites and on the electrostatic potential energy of the charged polymer. The charging capacity of PEOs was also investigated as a function of the concentration of and the type of alkali ions.     

Size dependence of the folding of multiply charged sodium cationized polylactides revealed by ion mobility mass spectrometry and molecular modelling

Ion mobility spectrometry coupled with mass spectrometry was used to experimentally determine the three-dimensional structure of multiply charged sodium cationized polylactides (PLA). In particular, the experiments were conducted to evaluate the influence of the charge state and the size on the gas-phase conformation of cationized PLA. The measured collision cross sections were then compared to calculated values obtained by computational chemistry methods. The most striking feature was the experimental and theoretical observation of a breaking point in the quasilinear relationship between the average collision cross sections and the number of monomer units for the triply charged cations. This breaking point was theoretically demonstrated, for the doubly and triply charged cations, to be associated with a significant folding of the polymer chains around the cationizing agents. The occurrence of such breaking points could be exploited to correlate the charge state of the most intense ion series observed upon electrospray ionization with the number-average molecular mass of a polymer.     

Beilschmiedic Acids F and G,Further Endiandric Acid Derivatives from Beilschmiedia anacardioides

Two new endiandric acid derivatives, beilschmiedic acid F ( 1 ) and beilschmiedic acid G ( 2 ), together with three known constituents, beilschmiedic acid A, beilschmiedic acid C, and sitosterol 3‐β‐D ‐glucopyranoside, were isolated from the stem bark of Beilschmiedia anacardioides. Their structures were elucidated mainly by using a combination of 1D‐ and 2D‐NMR techniques. The structure and relative configuration of beilschmiedic acid G ( 2 ) was also confirmed by X‐ray crystallographic analysis.