The Charging of Micellar Nanoparticles in Electrospray Ionization

Charging of nanoparticles through electrospray has scarcely been explored. Spherical nanometer‐sized amphiphilic block copolymer nanoparticles with diameters ranging from ～65 to ～150 nm were electrosprayed and analysed by charge detection spectrometry. Herein, we explore the charging of these micellar nano‐objects by conducting a thorough study in different solvents, including pure water, and upon the addition of “supercharging” agents. The charge (z) of micellar nanoparticles electrosprayed from water solution is compared to the Rayleigh’s limiting charge (z_R) of a charged water droplet of the same dimensions. An average ratio (z/z_R) of 0.6–0.65 is observed for the micellar macro‐ions, supporting the charge residue mechanism, where the number of charges available to the micellar macro‐ion is limited by the number of charges on the nanodroplet, which is a function of the surface tension of the solvent. Also we show the possibility of increasing the charging of micellar nanoparticles in the negative mode by adding organic bases (in particular piperidine) to water/methanol solutions.     

Efficiency of wollastonite and ammonium polyphosphate combinations on flame retardancy of polystyrene

The thermal and fire properties of polystyrene (PS) flame retarded by a system composed of ammonium polyphosphate (APP) and wollastonite (W) were investigated by thermogravimetric analysis, pyrolysis‐combustion flow calorimeter, pyrolysis gas chromatography mass spectrometry, cone calorimetry and epiradiator. The combustion residues were observed by scanning electron microscopy/energy dispersive X‐ray spectroscopy and analyzed by X‐ray diffraction. The combination of both additives enables increasing the thermal stability of PS while increasing simultaneously the high temperature residue. The peak of HRR was also significantly reduced while time to ignition varied depending on the composition. It was shown that the degradation pathway of PS was affected by the presence of the additives implying a reduction of the effective heat of combustion. In the condensed phase, APP decomposition promotes char formation and favors the reactivity between phosphorus and silicate. A layer composed of char, W and a mixture of calcium and silicon phosphate is formed at the sample surface during combustion. This layer is cohesive enough to limit the release of combustible gases to the gas phase. Moreover, the thermally stable protective layer reaches high temperature enabling the re‐irradiation of a part of the incident heat flux. The flame retardancy of PS is thus enhanced. Copyright © 2012 John Wiley & Sons, Ltd.     

Vacuum Ultraviolet Action Spectroscopy of Polysaccharides

We studied the optical properties of gas-phase polysaccharides (maltose, maltotetraose, and maltohexaose) ions by action spectroscopy using the coupling between a quadrupole ion trap and a vacuum ultraviolet (VUV) beamline at the SOLEIL synchrotron radiation facility (France) in the 7 to 18 eV range. The spectra provide unique benchmarks for evaluation of theoretical data on electronic transitions of model carbohydrates in the VUV range. The effects of the nature of the charge held by polysaccharide ions on the relaxation processes were also explored. Finally the effect of isomerization of polysaccharides (with melezitose and raffinose) on their photofragmentation with VUV photons is presented.

Deciphering the structure of isomeric oligosaccharides in a complex mixture by tandem mass spectrometry: Photon activation with vacuum ultra-violet brings unique information and enables definitive structure assignment

Carbohydrates have a wide variety of structures whose complexity and heterogeneity challenge the field of analytical chemistry. Tandem mass spectrometry, with its remarkable sensitivity and high information content, provides key advantages to addressing the structural elucidation of polysaccharides. Yet, classical fragmentation by collision-activated dissociation (CAD) in many cases fails to reach a comprehensive structural determination, especially when isomers have to be differentiated. In this work, for the first time, vacuum ultra-violet (VUV) synchrotron radiation is used as the activation process in tandem mass spectrometry of large oligosaccharides. Compared to low energy CAD (LE-CAD), photon activated dissociation brought more straightforward and valuable structural information. The outstanding feature was that complete series of informative ions were produced, with only minor neutral losses. Moreover, systematic fragmentation rules could be drawn thus facilitating the definitive assignments of fragment identities. As a result, most of the structures present in a complex mixture of oligogalacturonans could be comprehensively resolved, including many isomers differing in the position of methyl groups along the galacturonic acid backbone.     

Regioselective Hydroarylation Reactions of C3 Electrophilic N‐Acetylindoles Activated by FeCl3: An Entry to 3‐(Hetero)arylindolines

A method for the direct and rare umpolung of the 3 position of indoles is reported. The activation of N‐acetylindole with iron(III) chloride allows the C?H addition of aromatic and heteroaromatic substrates to the C2?C3 double bond of the indole nucleus to generate a quaternary center at C3 and leads regioselectively to 3‐arylindolines. Optimization, scope (50 examples), practicability (gram scale, air atmosphere, room temperature), and mechanistic insights of this process are presented. Synthetic transformations of the indoline products into drug‐like compounds are also described.     

Effect of Mobile Phase on Electrospray Ionization Efficiency

Electrospray (ESI) ionization efficiencies (IE) of a set of 10 compounds differing by chemical nature, extent of ionization in solution (basicity), and by hydrophobicity (tetrapropylammonium and tetraethylammonium ion, triethylamine, 1-naphthylamine, N,N-dimethylaniline, diphenylphthalate, dimethylphtahalate, piperidine, pyrrolidine, pyridine) have been measured in seven mobile phases (three acetonitrile percentages 20%, 50%, and 80%, and three different pH-adjusting additives, 0.1% formic acid, 1 mM ammonia, pH 5.0 buffer combination) using the relative measurement method. MS parameters were optimized separately for each ion. The resulting relative IE data were converted into comparable logIE values by anchoring them to the logIE of tetrapropylammonium ion taking into account the differences of ionization in different solvents and thereby making the logIE values of the compounds comparable across solvents. The following conclusions were made from analysis of the data. The compounds with pK _a values in the range of the solution pH values displayed higher IE at lower pH. The sensitivity of IE towards pH depends on hydrophobicity being very strong with pyridine, weaker with N,N-dimethylaniline, and weakest with 1-naphthylamine. IEs of tetraalkylammonium ions and triethylamine were expectedly insensitive towards solution pH. Surprisingly high IEs of phthalate esters were observed. The differences in solutions with different acetonitrile content and similar pH were smaller compared with the pH effects. These results highlight the importance of hydrophobicity in electrospray and demonstrate that high hydrophobicity can sometimes successfully compensate for low basicity. Graphical Abstract

?     

A Bio‐Inspired Switch Based on Cobalt(II) Disulfide/Cobalt(III) Thiolate Interconversion

Disulfide/thiolate interconversion supported by transition‐metal ions is proposed to be implicated in fundamental biological processes, such as the transport of metal ions or the regulation of the production of reactive oxygen species. We report herein a mononuclear dithiolate Co^III complex, [Co^IIILS(Cl)] ( 1 ; LS=sulfur containing ligand), that undergoes a clean, fast, quantitative and reversible Co^II disulfide/Co^III thiolate interconversion mediated by a chloride anion. The removal of Cl^? from the Co^III complex leads to the formation of a bis(μ‐thiolato) μ‐disulfido dicobalt(II) complex, [Co₂^II,IILSSL]²⁺ ( 2 ²⁺). The structures of both complexes have been resolved by single‐crystal X‐ray diffraction; their magnetic, spectroscopic, and redox properties investigated together with DFT calculations. This system is a unique example of metal‐based switchable Mⁿ₂‐RSSR/2 M⁽ⁿ⁺¹⁾‐SR (M=metal ion, n=oxidation state) system that does not contain copper, acts under aerobic conditions, and involves systems with different nuclearities.     

Tetra- and dinuclear nickel(II)-vanadium(IV/V) heterometal complexes of a phenol-based N2O2 ligand: synthesis, structures, and magnetic and redox properties

The tetra- and binuclear heterometallic complexes of nickel(II)-vanadium(IV/V) combinations involving a phenol-based primary ligand, viz., N,N'-dimethyl-N,N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine (H2L1), are reported in this work. Carboxylates and beta-diketonates have been used as ancillary ligands to obtain the tetranuclear complexes [Ni(II)(2)V(V)(2)(RCOO)(2)(L(1))(2)O(4)] (R = Ph, 1; R = Me(3)C, 2) and the binuclear types [(beta-diket)Ni(II)L(1)V(IV)O(beta-diket)] (3 and 4), respectively. X-ray crystallography shows that the tetranuclear complexes are constructed about an unprecedented heterometallic eight-membered Ni(2)V(2)O(4) core in which the (L(1))(2)- ligands are bound to the Ni center in a N(2)O(2) mode and simultaneously bridge a V atom via the phenoxide O atoms. The cis-N(2)O(4) coordination geometry for Ni is completed by an O atom derived from the bridging carboxylate ligand and an oxo O atom. The latter two atoms, along with a terminal oxide group, complete the O5 square-pyramidal coordination geometry for V. Each of the dinuclear compounds, [(acac)Ni(II)L(1)V(IV)O(acac)] (3) and [(dbm)Ni(II)L(1)V(IV)O(dbm)] (4) [Hdbm = dibenzoylmethane], also features a tetradentate (L(1))(2)- ligand, Ni in an octahedral cis-N(2)O(4) coordination geometry, and V in an O(5) square-pyramidal geometry. In 3 and 4, the bridges between the Ni and V atoms are provided by the (L(1))(2)- ligand. The Ni...V separations in the structures lie in the narrow range of 2.9222(4) A (3) to 2.9637(5) A (4). The paramagnetic Ni centers (S = 1) in 1 and 2 are widely separated (Ni...Ni separations are 5.423 and 5.403 A) by the double V(V)O(4) bridge that leads to weak antiferromagnetic interactions (J = -3.6 and -3.9 cm-1) and thus an ST = 0 ground state for these systems. In 3 and 4, the interactions between paramagnetic centers (Ni(II) and V(IV)) are also antiferromagnetic (J = -8.9 and -10.0 cm-1), leading to an S(T) = 1/2 ground state. Compound 4 undergoes two one-electron redox processes at E(1/2) = +0.66 and -1.34 V vs Ag/AgCl reference due to a V(IV/V) oxidation and a Ni(II)/I reduction, respectively, as indicated by cyclic and differential pulse voltammetry.     

Pentanuclear dysprosium hydroxy cluster showing single-molecule-magnet behavior

A pentanuclear dysprosium hydroxy cluster of composition [Dy 5(mu 4-OH)(mu 3-OH) 4(mu-eta (2)-Ph 2acac) 4(eta (2)-Ph 2acac) 6] ( 1; Ph 2acac = dibenzoylmethanide) was prepared starting from [DyCl 3.6H 2O] and dibenzoylmethane. Both static (dc) and dynamic (ac) magnetic properties of 1 have been studied. Below 3 K, the appearance of slow relaxation of the magnetization typical for single-molecule magnets is seen, even if no hysteresis effects on the M vs H data are observed above 1.8 K.     

Structure and characterization of zero- to two-dimensional compounds built up of the sandwich-type clusters and transition-metal linkers

Five new heteropolyoxotungstates K₂Na₂Mn₂(H₂O)₁₂[Mn₂(H₂O)₁₀Mn₄(H₂O)₂(XW₉O₃₄)₂]·18H₂O (X=Ge, 1; X=Si, 2), Na₄[Mn₄(H₂O)₁₈Mn₄(H₂O)₂(XW₉O₃₄)₂]·22H₂O (X=Ge, 3; X=Si, 4) and K₃Na₅[Mn₂(H₂O)₆Mn₄(H₂O)₂(SiW₉O₃₄)₂]·23.5H₂O (5) have been obtained by the routine synthetic reactions in aqueous solution. In 1 and 2, two isolated Mn²⁺ ions are covalently linked to the sandwich-type polyoxoanions [Mn₄(H₂O)₂(B-α-XW₉O₃₄)₂]¹²⁻ (X=Ge or Si) by two μ₂-oxygen atoms resulting in the disupporting sandwich-type polyoxometalates (POMs). Compounds 3 and 4 are built from the disupporting sandwich-type polyoxoanions 1 and 2, linked by additional four Mn²⁺ ions to construct a 1D ladder-like chain-like structure, which is rarely observed in the POM chemistry. Compound 5 represents the first example of the 2D structure consisting of the sandwich-type polyoxoanion [Mn₄(H₂O)₂(SiW₉O₃₄)₂]¹²⁻ and the binuclear {Mn₂(H₂O)₆}⁴⁺ group. The magnetic studies of compounds 1, 4 and 5 indicate that the antiferromagnetic interactions are predominant in the three compounds between Mn(II) metal ions.