A study of linear versus angled rigid rod polymers for proton conducting membranes using sulfonated polyimides

Linear and angled monomers were incorporated into the main chain of a polyimide in order to investigate the effect of kinked versus linear polymers on membrane properties such as water uptake and proton conductivity. Polymers prepared using linear 4,4′-sulfonyldianiline, SPI1, and using angled 3,4′-sulfonyldianiline, SPI2, were cast into membranes possessing ion exchange capacities that varied from 0.79 to 2.75 meq g⁻¹. Membranes are thermally stable up to 300 °C under air. Proton conductivity of both membranes increases with temperature to values of 0.1-0.2 S cm⁻¹. The conductivity of angled, SPI2 membranes is greater than those prepared from SPI1 for a given IEC but water uptakes are lower. These differences are attributed to increased entanglements of the angled polymers, which limits the degree of swelling and increases the proton concentration. These results may be important in the design of proton conducting membranes from other rigid polyarylenes.     

The effect of spatial confinement of Nafion in porous membranes on macroscopic properties of the membrane

Polyelectrolytes were incorporated into porous reinforcing materials to study the properties of ionomers in confined spaces and to determine the effect of the porous material on the behaviour of the membranes. Nafion^® was imbibed into porous polypropylene (Celgard^®), ultra-high-molecular weight polyethylene (Daramic^®), and polytetrafluoroethylene (PTFE) films. Through the use of reinforcing materials, it is possible to prepare membranes that are thinner, but stronger than pure ionomer membranes. Thin reinforced membranes have advantages such as lower areal resistance (as low as 0.14 Ω cm² for 57 μm CG3501 + Nafion^® compared to 0.34 Ω cm² for 89 μm cast Nafion^®) and lower dimensional changes due to swelling (as low as a 4% change in length and width for WDM + Nafion^® compared to 13% for cast Nafion^®). Using reinforcing materials results in a reduction in important membrane properties compared to bulk Nafion^®, such as proton conductivity (as low as 0.016 S cm⁻¹ for CG3401 + Nafion^® compared to 0.076 S cm⁻¹ for cast Nafion^®), effective proton mobility (as low as 3.2 × 10⁻⁴ cm² V⁻¹ s⁻¹ CG3401 + Nafion^® compared to 7.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ for cast Nafion^®), and water vapour permeance (as low as 0.036 g h⁻¹ Pa⁻¹ m⁻² for WDM + Nafion^® compared to 0.056 g h⁻¹ Pa⁻¹ m⁻² for cast Nafion^®). By normalizing the membrane properties with respect to ionomer content, it was possible to examine the properties of the Nafion^® inside the pores of the membranes. The proton conductivity (as low as 0.032 S cm⁻¹ for CG3401 + Nafion^®), effective proton mobility (as low as 3.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ for CG3401 + Nafion^®), and water vapour permeability (as low as 2.7 × 10⁻⁶ g h⁻¹ Pa⁻¹ m⁻¹ for PTFE MP 0.1 + Nafion^®) of the ionomer in the membrane are also diminished compared to bulk Nafion^® due to decreased connectivity of the ionomer and a restriction in macromolecular motions caused by the pore walls. A series of porous materials with increasing pore were also examined. As the pore size of the PTFE MP materials increased from 0.1 μm to 10 μm, the proton conductivity (0.022 S cm⁻¹ to 0.041 S cm⁻¹), effective proton mobility ((4.1 to 5.6) × 10⁻⁴ cm² V⁻¹ s⁻¹), and water vapour permeability ((2.4 to 4.3) × 10⁻⁶ g h⁻¹ Pa⁻¹ m⁻¹) of the reinforced membranes improved with increasing pore size and the properties of the ionomer inside the membranes approached the value of bulk Nafion^®.     

Infrared multiphoton dissociation spectroscopy of cationized threonine: effects of alkali-metal cation size on gas-phase conformation

The gas-phase structures of alkali-metal cation complexes of threonine (Thr) are examined using infrared multiple photon dissociation (IRMPD) spectroscopy utilizing light generated by a free electron laser in conjunction with quantum chemical calculations. Spectra of Li+(Thr) and Na+(Thr) are similar and relatively simple, whereas K+(Thr), Rb+(Thr), and Cs+(Thr) include distinctive new IR bands. Measured IRMPD spectra are compared to spectra calculated at a B3LYP/6-311+G(d,p) level to identify the structures present in the experimental studies. For the smaller metal cations, the spectra match those predicted for charge-solvated structures in which the ligand exhibits tridentate coordination, M1[N,CO,OH], binding to the amide and carbonyl groups of the amino acid backbone and to the hydroxyl group of the side chain. K+(Thr), Rb+(Thr), and Cs+(Thr) exhibit evidence of the charge-solvated complex, M3[COOH], in which the metal cation binds to the carboxylic acid group. Evidence for a small population of the zwitterionic analogue of this structure, ZW[CO2-], is also present, particularly for the Cs+ complex. Calculations indicate that the relative stability of the M3[COOH] structure is very strongly dependent on the size of the metal cation, consistent with the range of conformations observed experimentally. The present results are similar to those obtained previously for the analogous M+(Ser) complexes, although there are subtle distinctions that are discussed.     

PHOTOKINETIC AND PHOTOPHYSICAL MEASUREMENTS OF THE SENSITIZED PHOTOOXIDATION OF THE TRYPTOPHYL RESIDUE IN N-ACETYL TRYPTOPHANAMIDE AND IN HUMAN SERUM ALBUMIN

Abstract— The photosensitized oxidation of 10–100 μ M N -acetyl-L-tryptophanamide (NATA) in neutral aqueous solution and in the presence of various dyes proceeds by a pure O₂(¹Δ_g)-involving mechanism. Incorporation of the tryptophyl (Trp) residue into the polypeptide chain of human serum albumin (HSA) has no influence on the mechanism and efficiency of Trp photooxidation when sensitized either by methylene blue, a non-binding dye, or by rose bengal, a dye that gives non-covalent 1: 1 complexes with HSA. This is due to the location of the Trp residue in close proximity of the protein surface and, in the case of rose bengal, to the coincidence of the photophysical properties (including the quantum yield of O₂(¹Δ_g) generation) for the free and HSA-bound dye. Hematoporphyrin also binds to HSA with 1: 1 stoichiometry, although at a different site from rose bengal. Bound Hp again displays photophysical properties very similar with those of free Hp; however, the efficiency of Trp photo-oxidation in HSA is about 5-fold higher than in NATA owing to a limited rearrangement of the protein structure, induced by Hp binding, which enhances the probability of chemical quenching of O₂(¹Δ_g) by the indole ring.     

Sodium cation affinities of MALDI matrices determined by guided ion beam tandem mass spectrometry: application to benzoic acid derivatives

Threshold collision-induced dissociation of Na(+)(xBA) complexes with Xe is studied using guided ion beam mass spectrometry. The xBA ligands studied include benzoic acid and all of the mono- and dihydroxy-substituted benzoic acids: 2-, 3-, and 4-hydroxybenzoic acid and 2,3-, 2,4-, 2,5-, 2,6-, 3,4-, and 3,5-dihydroxybenzoic acid. In all cases, the primary product corresponds to endothermic loss of the intact xBA ligand. The cross section thresholds are interpreted to yield 0 and 298 K bond dissociation energies (BDEs) for Na(+)-xBA after accounting for the effects of multiple ion-neutral collisions, internal and kinetic energy distributions of the reactants, and dissociation lifetimes. Density functional theory calculations at the B3LYP/6-31G* level of theory are used to determine the structures of these complexes and provide the molecular constants necessary for the thermodynamic analysis of the experimental data. Theoretical BDEs are determined at the B3LYP/6-311+G(2d,2p) and MP2(full)/6-311+G(2d,2p) levels using the B3LYP/6-31G* optimized geometries. The trends in the measured BDEs suggest two very different binding modes for the Na(+)(xBA) complexes, while theory finds four. In general, the most stable binding conformation involves the formation of a six-membered chelation ring via interaction with the carbonyl and 2-hydroxyl oxygen atoms. The ground state geometries of the Na(+)(xBA) complexes in which the ligand does not possess a 2-hydroxyl group generally involve binding of Na(+) to either the carbonyl oxygen atom or to both oxygen atoms of the carboxylic acid group. These binding modes tend to be competitive because the enhancement in binding associated with the chelation interactions in the latter is mediated by steric repulsion between the hydroxyl and ortho hydrogen atoms. When possible, hydrogen bonding interactions with the ring hydroxyl group(s) enhance the stability of these complexes. The agreement between the theoretical and experimental BDEs is quite good for B3LYP and somewhat less satisfactory for MP2(full).     

Studies of mixed surfactant solutions of cationic dimeric (gemini) surfactant with nonionic surfactant C12E6 in aqueous medium

The interaction between the alkanediyl-alpha,omega-type cationic gemini surfactant, [(C(16)H(33)N(+)(CH(3))(2)(CH(2))(4)N(+)(CH(3))(2)C(16)H(33))2Br(-)], 16-4-16 and the conventional nonionic surfactant [CH(3)(CH(2))(10)CH(2)(OCH(2)CH(2))(6)OH], C(12)E(6) in aqueous medium has been investigated. The critical micelle concentrations of different mixtures have been measured by surface tension using a du Nouy tensiometer in aqueous solution at different temperatures (303, 308, and 313 K). Maximum surface excess (Gamma(max)) and minimum area per molecule (A(min)) were evaluated from a surface tension vs log(10)C (C is concentration) plot. The cmc value of the mixture was used to compute beta(m), the interaction parameter. The beta(sigma), the interaction parameter at the monolayer air-water interface, was also calculated. We observed synergism in 16-4-16/C(12)E(6) system at all concentration ratios. The micelle aggregation number (N(agg)) has been measured using a steady state fluorescence quenching method at a total surfactant concentration approximately 2 mM at 25 degrees C. The micropolarity and the binding constant (K(sv)) of mixed systems were determined from the ratio of intensity of peaks (I(1)/I(3)) of the pyrene fluorescence emission spectrum. The micellar interiors were found to be reasonably polar. We also found, using Maeda's concept, that the chain-chain interactions are very important in this system.     

Liquid chromatography with tandem mass spectrometry method for trace level analysis of migrated secondary alkanesulfonate from poly(tetramethylene terephthalate) into food simulants

Secondary alkanesulfonate has been widely used as an antistatic additive in polymers for producing anti‐dust food packaging containers. Currently, no reported method exists for accurate quantification of secondary alkanesulfonate in ethanolic and acidic food simulants. A new liquid chromatography with tandem mass spectrometry method was developed to quantify the migrated amount of secondary alkanesulfonate at trace levels in food simulants from a poly(tetramethylene terephthalate) containing secondary alkanesulfonate. The poly(tetramethylene terephthalate) samples loaded with the antistatic additive were exposed to various food simulants. The collected extracts were directly analyzed by liquid chromatography with tandem mass spectrometry in electrospray ionization negative mode. As secondary alkanesulfonate is a mixture containing C14 to C17 chain lengths, it was separated on a Poroshell 120 EC‐C8 column adopting methanol water gradient program. The migration of secondary alkanesulfonate ranged from 58 to 329 ppb; which is well within the allowed permissible regulatory limits and the adopted method was validated by conducting spiking studies and acceptable recoveries were obtained. The developed method was not only sensitive to detect lower levels of the migrated antistatic additive, but it also avoided more cumbersome sample preparation methodologies like sample enrichment and other derivatization approaches.     

Structural, optical, and photophysical properties of nickel(II) alkylthioporphyrins: insights from experimental and DFT/TDDFT studies

The ground- and excited-state properties of a Ni(II) porphyrin bearing peripheral alkylthio group, NiOMTP (OMTP = 2,3,7,8,12,13,17,18-octakis methylthio porphyrinate) have been investigated by steady-state and time-resolved absorption spectrometry and DFT/TDDFT theoretical methods. Several conformations corresponding to different deformations of the porphyrin core and to different orientations of the alkylthio groups have been theoretically explored. The nearly degenerate, purely ruffled D(2d) and hybrid (ruffled with a modest degree of saddling) D(2) conformations, both characterized by an up-down (ud) orientation of the vicinal methylthio groups are by far the preferred conformations in the "gas phase". In contrast to NiOEP, it is the orientation of the peripheral substituents rather than the type and degree of distortions of the porphyrin core that determines the stability of the NiOMTP conformers. The ground-state electronic absorption spectra of NiOMTP exhibit significant changes compared to its parent NiP and beta-alkylated analogues, such as NiOEP, resulting in a considerable red shift of the B and the Q bands, intensification and broadening of the Q band, and additional weak absorptions in the region between the Q and B bands. These spectral changes can be understood in terms of the electronic effects of the methylthio groups with nonplanar distortions of the porphyrin ring playing a very minor role. Transient absorption measurements with sub-picosecond resolution performed in toluene and TDDFT calculations reveal that following photoexcitation, NiOMTP deactivates by the pathway 1(pi,pi) --> 3(d(z2),d(x2-y2))--> ground state. The (d,d) state exhibits complex spectral evolution over ca. 8 ps, interpreted in terms of vibrational relaxation and cooling. The cold ligand-field excited state decays with a lifetime of 320 ps. At variance with the highly distorted nickel porphyrins but similar to the planar analogues, the (d,d) spectrum of NiOMTP has transient absorption bands immediately to the red of the bleaching of the ground-state Q and B bands.     

Properties of a growing random directed network

We study a number of properties of a simple random growing directed network which can be used to model real directed networks such as the world-wide web and call graphs. We confirm numerically that the distributions of in- and out-degree are consistent with a power law, in agreement with previous analytical results and with empirical measurements from real graphs. We study the distribution and mean of the minimum path length, the high degree nodes, the appearance and size of the giant component and the topology of the nodes outside the giant component. These properties are compared with empirical studies of the world-wide web. Received 15 June 2001 and Received in final form 12 July 2001     

Surface recognition of a protein using designed transition metal complexes.

Each protein has a unique pattern of histidine residues on the surface. This paper describes the design, synthesis, and binding studies of transition metal complexes to target the surface histidine pattern of carbonic anhydrase (bovine erythrocyte). When the pattern of cupric ions on a complex matches the surface pattern of histidines of the protein, strong and selective binding can be achieved in aqueous buffer (pH = 7.0). The described method of protein recognition is applicable to proteins of known structures. With rapidly increasing number of solved protein structures, the method has wide applicability in purification, targeting, and sensing of proteins.