Repeated-load testing of schist and limestone aggregate materials used in unbound forest roads

This study examined the behaviour of two completion aggregates that were placed on a silty sandy formation material and subjected to repeated loading in a large-scale testing rig. The completion aggregates were (i) a good quality limestone, and (ii) a poor quality schist, and are used in the construction of unbound forest roads in Ireland. The schist was tested on its own and in combination with the completion limestone aggregate for up to 150,000 load applications with a maximum loading pressure of 1000 kPa. Measurements of surface deflections and formation pressures were made during each test. A combination of a 200 mm layer of the limestone aggregate placed on top of a 250 mm layer of the schist aggregate produced the lowest permanent deformations, resilient deflections, and resilient pressures under dry and wet undrained conditions.     

Investigation of the metabolic fate of 2-, 3- and 4-bromobenzoic acids in bile-duct-cannulated rats by inductively coupled plasma mass spectrometry and high-performance liquid chromatography/inductively coupled plasma mass spectrometry/electrospray mass spectrometry

Inductively coupled plasma mass spectrometry (ICPMS) has been used to determine the rate and routes of excretion of bromine following the intraperitoneal administration (50 mg kg(-1)) of 2-, 3- and 4-bromobenzoic acids to male bile-duct-cannulated rats. Analysis of urine and bile for (79/81)Br using ICPMS showed that all three bromobenzoic acids were rapidly excreted (82-98%) within 48 h of dosing, primarily via the urine. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICPMS) was then used to obtain metabolite profiles for bile and urine. These profiles revealed that extensive metabolism had taken place, with the unchanged bromobenzoic acids forming a minor part of the total of compound-related material detected. Concomitant MS studies, supplemented by alkaline hydrolysis, enabled the identification of the major metabolite of all three of the bromobenzoic acids as a glycine conjugate. Ester glucuronide conjugates were also identified, but formed only a small proportion of total.     

Modeling metal cation-phosphate interactions in nucleic acids in the gas phase via alkali metal cation-triethyl phosphate complexes

Threshold collision-induced dissociation techniques are employed to determine the bond dissociation energies (BDEs) of complexes of alkali metal cations, Na+, K+, Rb+, and Cs+, to triethyl phosphate (TEP). The primary and lowest energy dissociation pathway in all cases is the endothermic loss of the neutral TEP ligand. Theoretical electronic structure calculations at the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G* level of theory are used to determine the structures, molecular parameters, and theoretical estimates for the BDEs of these complexes. For the complexes to Rb+ and Cs+, theoretical calculations were performed using hybrid basis sets in which the effective core potentials and valence basis sets of Hay and Wadt were used to describe the alkali metal cation, while the standard basis sets were used for all other atoms. The agreement between theory and experiment is excellent for the complexes to Na+ and K+ and is somewhat less satisfactory for the complexes to the heavier alkali metal cations, Rb+ and Cs+, where effective core potentials were used to describe the cation. The trends in the binding energies are examined. The binding of alkali metal cations to triethyl phosphate is compared with that to trimethylphosphate.     

Physicochemical Investigations on the Interaction of Surfactants and Salts with Polyvinylpyrrolidone in Aqueous Medium

Microcalorimetric investigations have been carried out onthe interaction of the surfactants sodium cholate, sodium deoxycholate, tetradecyltrimethylammonium bromide, cetyl(hexadecyl)trimethylammonium bromide, and p-tert-octylphenoxy polyoxy-ethylene ether (Triton X-100) and the salts potassium iodide, sodium benzoate, sodium bromide, and sodium salicylate with the neutral polymer polyvinylpyrrolidone (PVP). The enthalpy of dilution of the surfactants has been measured in the absence and presence of the polymer and the results are compared to determine the effect of PVP on the micellization of the surfactants and the energetics of the process. As well, the micellization activity of the surfactants in the presence of the polymer has been studied by conductometric and fluorimetric methods. The enthalpy of dilution of the salts has been measured to provide an understanding of the nature and magnitude of their interaction with PVP. Copyright 2001 Academic Press.     

Characterizing bitterness: identification of key structural features and development of a classification model

This work describes the first approach in the development of a comprehensive classification method for bitterness of small molecules. The data set comprises 649 bitter and 13 530 randomly selected molecules from the MDL Drug Data Repository (MDDR) which are analyzed by circular fingerprints (MOLPRINT 2D) and information-gain feature selection. The feature selection proposes substructural features which are statistically correlated to bitterness. Classification is performed on the selected features via a na?ve Bayes classifier. The substructural features upon which the classification is based are able to discriminate between bitter and random compounds, and thus we propose they are also functionally responsible for causing the bitter taste. Such substructures include various sugar moieties as well as highly branched carbon scaffolds. Cynaropicrine contains a number of the substructural features found to be statistically associated with bitterness and thus was correctly predicted to be bitter by our model. Alternatively, both promethazine and saccharin contain fewer of these substructural features, and thus the bitterness in these compounds was not identified. Two different classes of bitter compounds were identified, namely those which are larger and contain mainly oxygen and carbon and often sugar moieties, and those which are rather smaller and contain additional nitrogen and/or sulfur fragments. The classifier is able to predict 72.1% of the bitter compounds. Feature selection reduces the number of false-positives while also increasing the number of false negatives to 69.5% of bitter compounds correctly predicted. Overall, the method presented here presents both one of the largest databases of bitter compounds presently available as well as a relatively reliable classification method.     

Ultrafast dynamics of Cu(I)-phenanthrolines in dichloromethane

Transient absorption spectrometry of Cu(I)-phenanthrolines in CH2Cl2 reveals ligand-independent dynamic processes lasting 15 ps, which are associated with the peculiar structural rearrangements occurring for this class of compounds upon photoexcitation.     

Noncovalent interactions of Cu+ with N-donor ligands (pyridine, 4,4-dipyridyl, 2,2-dipyridyl, and 1,10-phenanthroline): collision-induced dissociation and theoretical studies

Collision-induced dissociation of complexes of Cu+ bound to a variety of N-donor ligands (N-L) with Xe is studied using guided ion beam tandem mass spectrometry. The N-L ligands examined include pyridine, 4,4-dipyridyl, 2,2-dipyridyl, and 1,10-phenanthroline. In all cases, the primary and lowest-energy dissociation channel observed corresponds to the endothermic loss of a single intact N-L ligand. Sequential dissociation of additional N-L ligands is observed at elevated energies for the pyridine and 4,4-dipyridyl complexes containing more than one ligand. Ligand exchange processes to produce Cu+Xe are also observed as minor reaction pathways in several systems. The primary cross section thresholds are interpreted to yield 0 and 298 K bond dissociation energies (BDEs) after accounting for the effects of multiple ion-neutral collisions, the kinetic and internal energy distributions of the reactants, and dissociation lifetimes. Density functional theory calculations at the B3LYP/6-31G* level are performed to obtain model structures, vibrational frequencies, and rotational constants for the neutral N-L ligands and the Cu+(N-L)x complexes. The relative stabilities of the various conformations of these N-L ligands and Cu+(N-L)x complexes as well as theoretical BDEs are determined from single point energy calculations at the B3LYP/6-311+G(2d,2p) level of theory using B3LYP/6-31G* optimized geometries. Excellent agreement between theory and experiment is observed for all complexes containing one or two N-L ligands, while theory systematically underestimates the strength of binding for complexes containing more than two N-L ligands. The ground-state structures of these complexes and the trends in the sequential BDEs are explained in terms of stabilization gained from sd-hybridization and repulsive ligand-ligand interactions. The nature of the binding interactions in the Cu+(N-L)x complexes are examined via natural bond orbital analyses.     

Structural and spectroscopic study of reactions between chelating zinc-binding groups and mimics of the matrix metalloproteinase and disintegrin metalloprotease catalytic sites: the coordination chemistry of metalloprotease inhibition

To understand the coordination chemistry of zinc-binding groups (ZBGs) with catalytic zinc centers in matrix metalloproteinases (MMPs) and disintegrin metalloproteases (ADAMs), we have undertaken a model compound study centered around tris(3,5-methylphenypyrazolyl)hydroboratozinc(II) hydroxide and aqua complexes ([Tp(Ph,Me)ZnOH] and [Tp(Ph,Me)Zn(OH2)]+, respectively, wherein (Tp(Ph,Me))- = hydrotris(3,5-methylphenylpyrazolyl)borate) and the products of their reactions with a class of chelating Schiff's base ligands. The results show that the protic ligands, HL (HL = N-propyl-1-(5-methyl-2-imidazolyl)methanimine (5-Me-4-ImHPr), N-propyl-1-(4-imidazolyl)methanimine (4-ImHPr), and N-propyl-1-(2-imidazolyl)methanimine (2-ImHPr)), react with [Tp(Ph,Me)ZnOH] and give products with the general formula [Tp(Ph,Me)ZnL], whereas reactions with neutral aprotic ligands, L' (L' = N-propyl-1-(1-methyl-2-imidazolyl)methanimine (1-Me-2-ImPr) and N-propyl-1-(2-thiazolyl)methanimine (2-TaPr)), yield the corresponding [Tp(Ph,Me)ZnL]+ complexes. Although the phenol group of N-propyl-1-(2-hydroxyphenyl)methanimine (2-HOPhPr) is protic, this ligand forms a cationic four-coordinate complex containing an intraligand hydrogen bond. The solid-state structures of these complexes were determined by single-crystal X-ray diffraction, and the results showed that the protic ligands form five-membered chelates of the Zn2+ ion. All ligands displace the aqua ligand in [Tp(Ph,Me)Zn(OH2)]+ to yield complexes having 1H NMR spectra consistent with the formation of five membered chelates. The 1H resonance frequencies of the chelating ligands typically shift upfield upon coordination to the zinc center, due to ring current effects from the pendant phenyl groups of the (Tp(Ph,Me))- ligand. Thus, the 1H NMR spectra provide a convenient and sensitive means of tracking the solution reactions by titration. The resulting series of spectra showed that the stabilities of the chelates in solution depend on the propensity of the ligands to deprotonate upon chelation of the zinc center. The behaviors of these bidentate ZBGs provide insight into the structural and electronic factors that contribute to the stabilities of inhibited MMPs and ADAMs and suggest that the proton acidity of the coordinated ZBG may be a crucial criterion for inhibitor design.     

Cation-pi interactions with a model for the side chain of tryptophan: structures and absolute binding energies of alkali metal cation-indole complexes

Threshold collision-induced dissociation techniques are employed to determine bond dissociation energies (BDEs) of mono- and bis-complexes of alkali metal cations, Li+, Na+, K+, Rb+, and Cs+, with indole, C8H7N. The primary and lowest energy dissociation pathway in all cases is endothermic loss of an intact indole ligand. Sequential loss of a second indole ligand is observed at elevated energies for the bis-complexes. Density functional theory calculations at the B3LYP/6-31G level of theory are used to determine the structures, vibrational frequencies, and rotational constants of these complexes. Theoretical BDEs are determined from single point energy calculations at the MP2(full)/6-311+G(2d,2p) level using the B3LYP/6-31G* geometries. The agreement between theory and experiment is very good for all complexes except Li+ (C8H7N), where theory underestimates the strength of the binding. The trends in the BDEs of these alkali metal cation-indole complexes are compared with the analogous benzene and naphthalene complexes to examine the influence of the extended pi network and heteroatom on the strength of the cation-pi interaction. The Na+ and K+ binding affinities of benzene, phenol, and indole are also compared to those of the aromatic amino acids, phenylalanine, tyrosine, and tryptophan to elucidate the factors that contribute to the binding in complexes to the aromatic amino acids. The nature of the binding and trends in the BDEs of cation-pi complexes between alkali metal cations and benzene, phenol, and indole are examined to help understand nature's preference for engaging tryptophan over phenylalanine and tyrosine in cation-pi interactions in biological systems.     

A continuous model of human dynamics

Ideas and tools from statistical physics have recently been applied to the investigation of human dynamics. The timing of human activities, in particular, has been studied both experimentally and analytically. Empirical data show that, in many different situations, the time interval separating two consecutive tasks executed by an individual follows a heavy-tailed probability distribution rather than Poisson statistics. To account for this data, human behaviour has been viewed as a decision-based queuing system where individuals select and execute tasks belonging to a finite list of items as an increasing function of a task priority parameter. It is then possible to obtain analytically the empirical result P(τ)∼1/τ, where P(τ) is the waiting time probability distribution.Here a continuous model of human dynamics is introduced using instead an infinite queuing list. In contrast with the results obtained by other models in the finite case we find a waiting time distribution explicitly depending on the priority distribution density function ρ. The power-law scaling P(τ)∼1/τ is then recovered when ρ is exponentially distributed.