A high-power millimeter-wave sheet beam free-electron laseramplifier

The results of experiments with a short period (9.6 mm) wiggler sheet electron beam (1.0 mm×2.0 cm) millimeter-wave free electron laser (FEL) amplifier are presented. This FEL amplifier utilized a strong wiggler field for sheet beam confinement in the narrow beam dimension and an offset-pole side-focusing technique for the wide dimension beam confinement. The beam analysis herein includes finite emittance and space-charge effects. High-current beam propagation was achieved as a result of extensive analytical studies and experimental optimization. A design optimization resulted in a low sensitivity to structure errors and beam velocity spread, as well as a low required beam energy. A maximum gain of 24 dB was achieved with a 1-kW injected signal power at 86 GHz, a 450-kV beam voltage, 17-A beam current, 3.8-kG wiggler magnetic field, and a 74-period wiggler length. The maximum gain with a one-watt injected millimeter-wave power was observed to be over 30 dB. The lower gain at higher injection power level indicates that the device has approached saturation. The device was studied over a broad range or experimental parameters. The experimental results have a good agreement with expectations from a one-dimensional simulation code. The successful operation of this device has proven the feasibility of the original concept and demonstrated the advantages of the sheet beam FEL amplifier. The results of the studies will provide guidelines for the future development of sheet beam FELs and/or other kinds of sheet beam devices     

Kinetics of the bromine catalyzed elimination of HCl from 1,1,1-trichloroethane

The gas phase kinetics of the bromine catalyzed elimination of HCl from 1,1,1-trichloroethane has been studied over a five fold variation of (CH₃CCl₃)/(Br₂) and from 565 to 634 K. The most important reactions in the mechanism are found to be: The preferred analysis of the kinetic data results in log(k₁/M^?1 s^?1) = 11.3 ± 0.3 ? (19.9 ± 1.0) × 10³/4.575 T. From these results one calculates the C—H bond dissociation energy in CH₃CCl₃ to be 103.8 ± 2 kcal mol^?1, and the heat of formation of 2,2,2-trichloroethyl to be 17.7 ± 2 kcal mol^?1.     

LASER PHOTOLYSIS STUDIES OF THE REDUCTION OF PARAQUAT CATIONS IN METHANOL

Abstract— A computer-controlled laser photolysis apparatus has been used to investigate the results of photoexcitation of paraquat. cations (PQ²⁺) in methanol solution. The formation of the monoreduced species (PQ⁺) is shown to occur in two processes overall; one is too fast to be resolved from the laser pulse; the second shows first order kinetics with an observed rate constant which is linearly dependent on the paraquat concentration. The natural lifetime of this second precursor to PQ⁺ was measured at 1.4 μs. about ten times longer than the CH₃O'radical which is the anticipated reductant. The identity of this precursor is possibly a radical pair.     

Photophysical behavior of open-shell first-row transition-metal octabutoxynaphthalocyanines: CoNc(OBu)8 and CuNc(OBu)8 as case studies

Ultrafast photodynamics and density functional theory/time-dependent density functional theory (DFT/TDDFT) results for complexes of Co and Cu with 5,9,14,18,23,27,32,36-octabutoxynaphthalocyanine [CoNc(OBu)8 and CuNc(OBu)8] are reported. As a basis for this work, details concerning the syntheses of these complexes and the corresponding Zn complex (used as a reference) are given. Transient absorption spectrometry with femtosecond time resolution combined with a detailed DFT/TDDFT analysis has been employed to construct a complete picture of the excited-state dynamics after Q-band excitation of the Co and Cu complexes and to gain an understanding of the relationship between the nature of the metal center and the excited-state lifetime. The Co complex was shown to return to its ground state via two competing channels: a (2)T1(pi, pi*) state that decayed with a lifetime of 1 ps and a low-lying (2)(d, d) state that repopulated the ground-state surface with a lifetime of 15 ps. CuNc(OBu)8 showed ground-state repopulation from the (2)T1(pi, pi*) state via a lower-lying ligand-to-metal charge-transfer (LMCT) state that was completed within a few nanoseconds. The photophysical behavior of the cobalt and copper complexes was compared to that previously reported for the nickel analog in an effort to highlight the effect of the central metal on the nature and rates of the deactivation pathways. The results described in this work provide basic knowledge that is relevant to the use of these compounds as photothermal sensitizers in cancer therapy.     

Synthesis, redox, and amphiphilic properties of responsive salycilaldimine-copper(II) soft materials

Hydrolysis of the asymmetric pyridine- and phenol-containing ligand HL (1) (2-hydroxy-4-6-di- tert-butylbenzyl-2-pyridylmethyl)imine) led to the use of bis-(3,5-di -tert-butyl-2-phenolato-benzaldehyde)copper(II), [Cu (II)(L (SAL)) 2] ( 1) as a precursor for bis-(2,4-di- tert-butyl-6-octadecyliminomethyl-phenolato)copper(II), [Cu (II)(L (2)) 2] ( 3), bis-(2,4-di- tert-butyl-6-octadecyl aminomethyl-phenolato)copper(II), [Cu (II)(L (2A)) 2] ( 3'), and bis-(2,4-di- tert-butyl-6-[(3,4,5-tris-dodecyloxy-phenylimino)-methyl]-phenolato)copper(II), [Cu (II)(L (3)) 2] ( 4). These complexes exhibit hydrophilic copper-containing head groups, hydrophobic alkyl and alkoxo tails, and present potential as precursors for redox-responsive Langmuir-Blodgett films. All systems were characterized by means of elemental, spectrometric, spectroscopic, and electrochemical techniques, and their amphiphilic properties were probed by means of compression isotherms and Brewster angle microscopy. Good redox activity was observed for 3 with two phenoxyl radical processes between 0.5 and 0.8 V vs Fc (+)/Fc, but this complex lacks amphiphilic behavior. To attain good balance between redox response and amphiphilicity, increased core flexibility in 3' and incorporation of alkoxy chains in 4 were attempted. Film formation with collapse at 14 mN.m (-1) was observed for the alkoxy-derivative but redox-response was seriously compromised. Core flexibility improved Langmuir film formation with a higher formal collapse and showed excellent cyclability of the ligand-based processes.     

Interaction of supercritical CO2 with alkyl-ammonium organoclays: changes in morphology

This paper investigates the influence of supercritical carbon dioxide on the morphology and surface chemistry of three organic modified montmorillonite species. Alkyl based quaternary ammonium surfactants with differing numbers of chains attached, were chosen to vary the degree of CO(2)-philicity exhibited by the organoclay. In a high pressure batch vessel, the different organoclays were suspended in the supercritical solvent at temperatures of 50 and 200 degrees C and pressures of 7.6 and 9.6 MPa and then removed after de-pressurization at 0.2 or 4.8 MPa/s. The structures of these treated clays were characterized by X-ray diffraction (XRD), differential scanning microscopy (DSC), and thermogravimetric analysis (TGA), and their chemical properties were analyzed by various methods including atomic absorption spectroscopy, and water uptake measurement. Solute-solvent interactions plasticized the organic medium while suspended in the supercritical fluid, which resulted in greater chain mobility and further cation exchange. The results indicate that intercalated surfactants exhibiting a paraffin complex arrangement were most likely to experience significant basal expansion, provided the tilt angle was not already close to being perpendicular to the silicate surface. At the lower processing temperature condition, the chemistry of the clay surface was notably altered by the CO(2) associations with the Lewis acid/base sites, which significantly reduced the moisture adsorption capacity of the material. For those organoclays demonstrating basal expansion, it was noted that the resulting particle size was increased due to enhanced porosity.     

Design of Switchable Chimeric Antigen Receptor T Cells Targeting Breast Cancer

Chimeric antigen receptor T (CAR‐T) cells have demonstrated promising results against hematological malignancies, but have encountered significant challenges in translation to solid tumors. To overcome these hurdles, we have developed a switchable CAR‐T cell platform in which the activity of the engineered cell is controlled by dosage of an antibody‐based switch. Herein, we apply this approach to Her2‐expressing breast cancers by engineering switch molecules through site‐specific incorporation of FITC or grafting of a peptide neo‐epitope (PNE) into the anti‐Her2 antibody trastuzumab (clone 4D5). We demonstrate that both switch formats can be readily optimized to redirect CAR‐T cells (specific for the corresponding FITC or PNE) to Her2‐expressing tumor cells, and afford dose‐titratable activation of CAR‐T cells ex vivo and complete clearance of the tumor in rodent xenograft models. This strategy may facilitate the application of immunotherapy to solid tumors by affording comparable efficacy with improved safety owing to switch‐based control of the CAR‐T response.     

Phototriggered Secretion of Membrane Compartmentalized Bioactive Agents

A strategy for the light‐activated release of bioactive compounds (BODIPY, colchicine, paclitaxel, and methotrexate) from membrane‐enclosed depots is described. We have found that membrane‐permeable bioagents can be rendered membrane impermeable by covalent attachment to cobalamin (Cbl) through a photocleavable linker. These Cbl‐bioagent conjugates are imprisoned within lipid‐enclosed compartments in the dark, as exemplified by their retention in the interior of erythrocytes. Subsequent illumination drives the secretion of the bioactive species from red blood cells. Photorelease is triggered by wavelengths in the red, far‐red, and near‐IR regions, which can be pre‐assigned by affixing a fluorophore with the desired excitation wavelength to the Cbl‐bioagent conjugate. Pre‐assigned wavelengths allow different biologically active compounds to be specifically and unambiguously photoreleased from common carriers.     

Speciation of nitrogen containing aromatics by atmospheric pressure photoionization or electrospray ionization fourier transform ion cyclotron resonance mass spectrometry

We determine the elemental compositions of aromatic nitrogen model compounds as well as a petroleum sample by atmospheric pressure photoionization (APPI) and electrospray Ionization (ESI) with a 9.4 Tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. From the double-bond equivalents calculated for the nitrogen-containing ions from a petroleum sample, we can infer the aromatic core structure (pyridinic versus pyrrolic nitrogen heterocycle) based on the presence of M(+.) (odd-electron) versus [M+H](+) (even-electron) ions. Specifically, nitrogen speciation can be determined from either a single positive-ion APPI spectrum or two ESI (positive- and negative-ion) spectra. APPI operates at comparatively higher temperature than ESI and also produces radical cations that may fragment before detection. However, APPI fragmentation of aromatics can be eliminated by judicious choice of instrumental parameters.     

Potassium cation affinities of matrix assisted laser desorption ionization matrices determined by threshold collision-induced dissociation: application to benzoic acid derivatives

Threshold collision-induced dissociation of K+(xBA) complexes with xenon is studied using guided ion beam mass spectrometry. The xBA ligands studied include benzoic acid and all of the mono- and dihydroxy-substituted benzoic acids: 2-, 3-, and 4-hydroxybenzoic acid and 2,3-, 2,4-, 2,5-, 2,6-, 3,4-, and 3,5-dihydroxybenzoic acid. In all cases, the primary product corresponds to endothermic loss of the intact xBA ligand. The cross section thresholds are interpreted to yield 0 and 298 K bond dissociation energies (BDEs) for K+-xBA after accounting for the effects of multiple ion-neutral collisions, the kinetic and internal energy distributions of the reactants, and dissociation lifetimes. Density functional theory calculations at the B3LYP/6-31G* level of theory are used to determine the structures of the xBA ligands and their complexes with K+. Theoretical BDEs are determined from single-point energy calculations at the B3LYP/6-311+G(2d,2p) and MP2(full)/6-311+G(2d,2p) levels using B3LYP/6-31G* optimized geometries. Four favorable binding modes for the K+(xBA) complexes are found. In all complexes to an xBA ligand that does not have a 2-hydroxyl substituent, the most favorable binding mode corresponds to a single interaction with the carbonyl oxygen atom. Formation of a 4-membered ring via chelation interactions with both oxygen atoms of the carboxylic acid group is found to be the most favorable binding mode for all of the 2-hydroxy-substituted systems except K+(2,3-dihydroxybenzoic acid). In these complexes, a hydrogen-bonding interaction between the hydrogen atom of the carboxylic acid moiety and the oxygen atom of the 2-hydroxy substituent provides additional stabilization. Formation of a 5-membered chelation ring via interaction of K+ with the oxygen atoms of adjacent hydroxyl substituents is also favorable and corresponds to the ground-state geometry for the K+(23DHBA) complex. Formation of a 6-membered chelation ring via interaction of K+ with the carbonyl and 2-hydroxyl oxygen atoms is also quite favorable but does not correspond to the ground-state geometry for any of the systems examined here. The experimental BDEs determined here are in very good agreement with the calculated values.