Ability of porous graphitic carbon to support electroosmotic flow in capillary electrochromatography

The existence of a cathodic EOF (electroosmotic flow) in the case of a porous graphitic carbon (PGC) partially packed column has been demonstrated. Then, the ability of PGC to afford electroosmosis has been brought to the fore with a fully PGC packed column. Experimental data have shown that PGC particles are negatively charged and their electrophoretic mobility has been evaluated. In order to investigate the conditions of existence of EOF different mobile phases have been tested. An EOF occurs when the conductivity of the PGC packed column is larger than the conductivity of an empty fused-silica capillary operating in the same conditions i.e. when the PGC participates in the electric conduction. Since the local electric fields in the two segments of the column are different, an evaluation of the electroosmotic mobility is not possible and the effect of the operational parameters such as the composition of the mobile phase (acetonitrile ratio and total ionic strength) has been studied in term of electroosmotic velocity V(eo).     

Computerized optimization of gradient elution conditions with ternary solvent mobile phases in RPLC

Summary In this work, an optimization procedure for gradient RPLC separation, using ternary mobile phases, is described. This procedure requires eight preliminary experiments in gradient elution mode to predict the retention surface for each solute over the whole triangular space. This is followed by computerized calculations to determine the best ternary gradient elution profile with respect to both selectivity and analysis time. The efficiency of this procedure from the point of view of rapidity and of accuracy, is illustrated for the specific separation of twelve phenyl urea herbicides.     

Simultaneous Determination of Trichothecenes A, B, and D in Maize Food Products by LC–MS–MS

Two new methods of analysis, based on liquid chromatography–tandem mass spectrometry, for simultaneous determination of trichothecenes A, B, and D in maize flour and oil have been developed and validated in accordance with European Commission decision 2002/657/EC (recovery, CCα, CCβ, and precision). The trichothecenes were extracted from maize flour by matrix solid-phase dispersion, with recoveries ≥79%, and from maize oil by liquid–liquid extraction, with recoveries ≥78%. Limits of quantitation ranged between 0.03 and 50 μg kg^?1, depending on the electrospray response to each analyte and on the matrix. Monitoring of flour and oil samples with this HPLC–MS–MS method revealed the presence of deoxynivalenol, T-2 toxin, and diacetoxyscirpenol at very low concentrations.     

Simultaneous determination of the urinary metabolites of benzene, toluene, xylene and styrene using high-performance liquid chromatography/hybrid quadrupole time-of-flight mass spectrometry

A simple and rapid method using reversed-phase liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the simultaneous determination of the urinary metabolites of benzene, toluene, xylene and styrene in human urine specimens and standard solutions is described. A hybrid quadrupole/time-of-flight (QqTOF) mass spectrometer was compared for the determination of metabolite of aromatic solvents in urine samples. The metabolites selected were: trans,trans-muconic acid, hippuric acid, o-, m- and p-methylhippuric acid and phenylglyoxylic acid. The compounds were well separated from each other on narrow-bore 1-mm i.d. reversed-phase LC C-18 columns. Average recoveries for loading 100 microL of urine samples varied from 88-110% and the quantification limits were less than 30 ng/mL for each analyte (3 ng/mL for trans,trans-muconic acid). The qualitative information obtained (mass accuracy, resolution and full-scan spectra) with the QqTOF mass spectrometer allows a secure identification of analytes in biological matrices.     

Effect of temperature in reversed phase liquid chromatography

The high temperature liquid chromatography (HTLC) reveals interesting chromatographic properties but even now, it misses some theoretical aspects concerning the influence of high temperature on thermodynamic and kinetic aspects of chromatography: such a knowledge is very essential for method development. In this work, the effect of temperature on solute behavior has been studied using various stationary phases which are representative of the available thermally stable materials present on the market. The thermodynamic properties were evaluated by using different mobile phases: acetonitrile-water, methanol-water and pure water. The obtained results were discussed on the basis of both type of mobile phases and type of stationary phases. Type of mobile phase was found to play an important role on the retention of solutes. The kinetic aspect was studied at various temperatures ranging from ambient temperature to high temperature (typically from about 30 to 200 degrees C) by fitting the experimental data with the Knox equation and it was shown that the efficiency is improved significantly when the temperature is increased. In this paper, we also discussed the problem of temperature control for thermostating columns which may represent a significant source of peak broadening: by taking into account the three main parameters such as heat transfer, pressure drop and band broadening resulting from the preheating tube, suitable rules are set up for a judicious choice of the column internal diameter.     

Gårding's Theory of Hyperbolic Polynomials

This paper presents a simple, self‐contained account of Gårding's theory of hyperbolic polynomials, together with a recent convexity result of Bauschke‐Güler‐Lewis‐Sendov and an inequality of Gurvits. This account begins by establishing some new results. The first concerns the existence of a pointwise arrangement of the eigenvalues so that they become global real analytic functions. The second asserts that the associated “branches” are independent of the choice of hyperbolic direction. © 2013 Wiley Periodicals, Inc.     

Thermal Characterizations of Inorganic and Organometallic Polymers

This review emphasizes the breadth of metallic and metallic-like polymers evaluated as to thermal properties. Techniques usefully applied to particular systems are noted with the aim of suggesting their application to other systems.     

Low-lying energy levels of the FeH molecule

Multireference configuration interaction (MRCI) and complete active space second-order perturbation theory (CASPT2) calculations are performed on Fe₂ and Fe^? ₂. Although it is not possible to definitively identify the ground states of Fe₂ and Fe^? ₂, the calculations suggest that the ground state of Fe^? ₂ in ⁸Σ^? _u derived from 3d¹³4σ² _g4σ² _u and that the states observed in photodetachment are the ⁹Σ^? _g and ⁷Σ^? _g states with a 3d¹³4σ² _g4σ¹ _u occupation, but that the ground state of Fe₂ is ⁷Δ_u(3d¹⁴4σ² _g) and is not observed in the photo-detachment spectra.     

Data Formats for Elementary Gas Phase Kinetics,Part 1: Unique Representations of Species at the Molecular Level

Standardized electronic formats for data are needed to efficiently and transparently communicate the results of scientific studies. A format for the unique identification of chemical species is a requirement in the field of chemistry, and the IUPAC International Chemical Identifier (InChI) has been widely adopted for this purpose. The InChI identifier has proved to be very useful. The InChI identifier, however, is currently insufficient to uniquely specify some types of molecular entities at a detailed molecular level needed to fully characterize their chemical nature, to differentiate between chemically distinct conformers, to uniquely identify structures used in quantum chemical calculations, and to completely describe elementary chemical reactions. To address this limitation, we propose an augmented form of InChI, denoted as InChI–ER, which contains additional optional layers that allow the unique and unambiguous identification of molecules at a detailed molecular level. The new layers proposed herein are optional extensions of the existing InChI formalism and, like all other InChI layers, would not interfere with InChI identifiers currently in use. The focus of the present work is the better specification of required molecular entities such as rotational conformations, ring conformations, and electronic states. In companion articles, we propose additional reaction layers using an extended InChI format that will enable the unique identification of elementary chemical reactions, including specification of associated transition states, specification of the changes in bonds that occur during reaction, and classification of reaction types.