Photoluminescence from CdS Quantum Dots in Silica Gel

CdS semiconductor nanocrystals were grown as quantum dots (QDs) inside a silica matrix obtained by the sol-gelmethod and assisted in the mother liquid by high powerultrasounds. Small-angle neutron scattering (SANS) accountsfor a 3.6 nm crystal size homogeneously distributed. Optical excitation from the third harmonic of a Nd:YAG ns laser wasfocused on the sample to study the photoluminescence (PL) atroom temperature. The PL spectrum shows radiative processfrom intrinsic transitions and a broad band corresponding tothe traps. Variable stripe length (VSL) method was used to measure the optical gain spectra by the growth of theamplified luminescence. A broad optical gain spectrumproduced by the biexciton-exciton transitions revealing thestimulated emission from the CdS QDs. It is also observed ared-shift of the PL emission crystal size-dependent.     

Raman spectroscopy shows interchain through space charge delocalization in a mixed valence oligothiophene cation and in its pi-dimeric biradicaloid dication

The vibrational Raman spectra of a decathiophene are provided in three relevant oxidations states: for the radical cation, its class III mixed valence system and its "frozen, -170 degrees C" class II MV analogue; for the dication, its singlet biradical pi-dimer and its "hot, +70 degrees C" magnetically active triplet excited state. Everything is compatible with interpentathiophene charge delocalization occurring at distances of 4-5 A similar to those found in the crystals of pi-stacked oligothiophenes. This stresses the interest of this spectroscopic tool for the analyses of electronic processes in crystals or in thin films of conjugated organic molecules.     

Synthesis of novel tetrahydroindeno[1,2-b]pyrrolidines via Ugi multicomponent and palladium-catalyzed aerobic oxidative cyclization

Novel tetrahydroindeno[1,2-b]pyrrolidines were conveniently prepared in moderate to good yields via a sequential Ugi multicomponent reaction or Staudinger/aza-Wittig/Ugi combination, followed by the palladium-catalyzed aerobic oxidative cyclization of the resulting Ugi adducts.     

Determination of terpenes in tequila by solid phase microextraction-gas chromatography-mass spectrometry

Solid phase microextraction and capillary gas chromatography-mass spectrometry were used for the determination of seven terpenes in tequila. The method was selected based on the following parameters: coating selection (PA, PDMS, CW/DVB, and PDMS/DVB), extraction temperature, addition of salt, and extraction time profile. The extraction conditions were: PDMS/DVB fiber, Headspace, 100% NaCl, 25 degrees C extraction temperature, 30 min extraction time and stirring at 1200 rpm. The calibration curves (50-1000 ng/ml) for the terpenes followed linear relationships with correlation coefficients (r) greater than 0.99, except for trans,trans-farnesol (r = 0.98). RSD values were smaller than 10% confirmed that the technique was precise. Samples from 18 different trade brands of "Aged" tequila analyzed with the developed method showed the same terpenes in different concentrations. The analytical procedure used is selective, robust (more than 100 analyses with the same fiber), fast and of low-cost.     

HF-LPME as a green alternative for the preconcentration of nickel in natural waters

In the last years, some analytical methodologies have been identified as a source of pollution, receiving increasing attention to decrease their impact on the environment. In this sense, the so-called solvent-less methodologies appear as a green alternative to reduce the volume of solvents used in many sample treatment procedures and, consequently, the volume of toxic wastes produced. Among these techniques, analytical methodologies based on liquid-phase microextraction are being continuously developed, although most applications are focused on organic compounds. In this work, a three-phase hollow-fibre liquid-phase microextraction (HF-LPME) system has been developed for the preconcentration of nickel in natural waters, prior to the analysis by atomic absorption spectrometry. Under optimum conditions, the new system allowed an enrichment factor of 29.80 to be obtained after 60 min of experiment, and it was successfully applied to the determination of nickel in both saline and non-saline water samples, at ppb and ppt levels. The results were compared with those obtained using a well-established methodology based on liquid solvent extraction showing no significant differences (α = 0.05) between both values. In addition, the new HF-LPME presents the advantages of a green analytical technique, as its greenness profile shows, with the additional reduction of sample manipulation and time cost.     

A new characterization of Sobolev spaces on $${\mathbb{R}^{n}}$$

In this paper we present a new characterization of Sobolev spaces on . Our characterizing condition is obtained via a quadratic multiscale expression which exploits the particular symmetry properties of Euclidean space. An interesting feature of our condition is that depends only on the metric of and the Lebesgue measure, so that one can define Sobolev spaces of any order of smoothness on any metric measure space.     

An integrated electrochemical fructose biosensor based on tetrathiafulvalene-modified self-assembled monolayers on gold electrodes

An integrated amperometric fructose biosensor based on a gold electrode (AuE) modified with a self-assembled monolayer (SAM) of 3-mercaptopropionic acid (MPA) on which fructose dehydrogenase (FDH) and the mediator tetrathiafulvalene (TTF) are co-immobilized by cross-linking with glutaraldehyde is reported. Variables concerning the behavior of the biosensor were optimized by taking the slope value obtained for the fructose calibration plot in the 0.1–1.0 mM concentration range as a criterion of selection. At an applied potential of +0.20 V, a good repeatability of such slope values (RSD=6.7%, n=10) was obtained with no need to apply a cleaning or pretreatment procedure to the modified electrode. Moreover, results from five different TTF-FDH-MPA-AuEs yielded a RSD of 5.8%. The useful lifetime of one single biosensor was approximately 30 days, exhibiting a 93% of the original response on the 33rd day. A linear calibration graph was obtained for fructose over the 1.0×10^–5–1.0×10^–3 M range, with a limit of detection of 2.4×10^–6 M. The effect of potential interferents was evaluated. The TTF-FDH-MPA-AuE also performed well in the flow-injection mode. The biosensor was used for the determination of fructose in real samples, and the results compared with those provided by using a commercial enzyme test kit.     

Mosaic CuI−CuII−InIII 2D Perovskites: Pressure-Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method

The perovskite (BA)₄[Cu^II(Cu^IIn^III)_0.5]Cl₈ ( 1_BA ; BA⁺=butylammonium) allows us to study the high-pressure structural, optical, and transport properties of a mixed-valence 2D perovskite. Compressing 1_BA reduces the onset energy of Cu^I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1_BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu^II perovskites achieve similar conductivity at ≈50 GPa. The solution-state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. To circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu^II single perovskites and Cu^IIn^III double perovskites.