Crystallization impedance in the case of D.C. superposition

An expression for the impedance frequency dependence in the case of d.c. superposition has been derived and analyzed for the crystallization process of metals taking into account the two-dimensional diffusion of ions in solution and the surface diffusion of adatoms and using the simplest surface model with parallel step lines. It is shown that in the general case it is impossible to present the crystallization impedance as the sum of the surface diffusion impedance and the Warburg impedance. It has been found that in the case of anode polarization an unusual effect of the impedance increasing with agitation intensity takes place which is typical of this mechanism. Possible methods for determination of the model parameters from impedance measurements are discussed. The authors suggest an iteration procedure which permits to determine all the parameters of the model under consideration including the surface diffusion coefficient of adatoms and the spacing between the growth step lines.     

Die Anwendung des Derivatographen zur Gleichzeitigen Dilatometrischen und Differential-Thermischen Analyse von Gläsern

Simultaneous DTA and dilatometric measurements were made and the derivatives of the dilatometric curves were taken for three glasses by means of a derivatograph. Glass blocks were used as test pieces with a boring for the thermoelement. A maximum was observed in the rate of length change, which can be explained by overheating phenomena. A comparison with DTA curves of glass powders published by Yamamoto showed that the break points in the DTA curves of glass blocks do not coincide with the Tg points, but under identical conditions they can serve for the rapid characterization of the transformation range.     

Analytical and radioanalytical quality control of purity and stability of radiopharmaceutical compound [186gRe]Re-HEDP for bone metastases pain palliation

Summary The nuclear properties of ^186gRe make it a useful agent for radionuclide therapy and imaging. The coordination compound [^186gRe]Re-HEDP has proved to be a successful bone seeking agent for palliation of metastatic bone pain. Chemical, radiochemical and radionuclidic purity of commercial radiopharmaceutical [^186gRe]Re-HEDP have been checked by means by γ- and β-spectrometries, INAA and paper radio-chromatography. The results indicate a good radionuclidic purity, with levels of contamination from the short-lived ¹⁸⁸Re well below the required specifications. After injection of the radiopharmaceutical, the radiochemical measurements conducted in vivo, on biological matrices, blood, plasma and urine, have shown that, entering the systemic circulation, ^186gRe dissociates from the bis-phosphonate complex as hydrosoluble [^186gRe]ReO₄-, and the two chemical species follow different biokinetics.     

Application of capillary zone electrophoresis and reversed-phase high-performance liquid chromatography in the biopharmaceutical industry for the quantitative analysis of the monosaccharides released from a highly glycosylated therapeutic protein

Two assays for the quantitative determination of the neutral and amino-monosaccharides attached to a therapeutic glycoprotein were developed using capillary zone electrophoresis (CZE) and RP-HPLC. These assays meet the strict batch release requirements of the quality control in biopharmaceutical industry. The monosaccharides were released from the glycoprotein by hydrolysis with 2N trifluoroacetic acid. In the CZE assay the monosaccharides were reacetylated prior to derivatization with 8-aminopyrenesulfonic acid (APTS), reacetylation in the glycoprotein matrix was investigated in detail. The RP-HPLC method used pre-column derivatization with anthranilic acid in methanol-acetate-borate reaction medium; reacetylation was not necessary. However, epimerization of the different monosaccharides was observed and studied in detail. For the quantitative assay, separation of the amino-monosaccharide epimers had to be developed. The HPLC assay was validated.     

Electromagnetic interactions with rough metal surfaces

When surfaces are structured on the scale of the wavelength, we can expect incident light to be strongly modified by the surface. This is especially the case when the surface is metallic. We have developed a formalism for computing these modifications, closely analogous to electron scattering theory, which we briefly review and present some results for optical properties of, and electron energy loss in, colloids. Our main theme is another effect associate with rough or structured metallic surfaces: Surface Enhanced Raman Scattering, or SERS. We model the rough surface by a periodic array of spheres and obtain the correct magnitude for the enhancement and for the frequency shifts observed.     

Oxidative addition of some geminal halonitroalkanes to iridium(I) and platinum(0) compounds

Oxidative addition of 1-chloro-1-nitroethane to trans-IrCl(CO)-[P(CH₃)₂C₆H₅]₂ followed by treatment of the initial product with pyridine yields a new iridium(III) complex IrCl(py)[COC(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, whose structure has been confirmed by X-rays crystallography. Two intermediate products have been observed by NMR spectroscopy; their structures have been tentatively assigned. The reaction of the corresponding bromine derivatives yields two isomers of the composition IrBr₂(CO)[CH(NO₂)CH₃][P(CH₃)₂C₆H₅]₂, and these are not affected by pyridine. The reaction of 1-chloro-1-nitroethane with Pt[P(C₆H₅)₃]₄ takes a completely different course in that yields nitrorethane and cis-PtCl₂[P(C₆H₅)₃]₂ as the main products, with no detectable formation of the products of oxidation addition. A brief mechanistic investigation points towards the participation of radicals and radical anions as transient intermediates and a mechanism is proposed which explains most of the experimental results.     

Fluorine absorption spectra and some fluorides in condensed state

The absorption spectra of liquid F₂, NF₃, N₂F₄, CF₄, BF₃, NF₃, SF₆ have been obtained at diminished temperatures in the near ultra-violet region of the spectrum. It is shown that the absorption spectrum does not differ from the spectra in the gaseous phase, therefore the elementary absorption act is characterized by the cross section of photon absorption by an individual molecule. The absorption cross sections of the above mentioned molecules are represented in the liquid phase, which do not differ strongly from absorption cross sections of these molecules in the gaseous phase. The dependence of the absorption cross sections of liquid fluorine on its concentrations in solutions with N₂, Ar, NF₃, O₂ at - 196°C has been studied. The cross sections of photon absorption by the fluoride molecule in different liquid media with small fluorine concentrations have been obtained.     

Separation of molybdenum from tungsten with di(2-ethylhexyl)-phosphoric acid ac extractant

The use of di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant for the separation of molybdenum from tungsten was examined with the help of molybdenum-99 and tungsten-187 as radiotracers. Effective separation was obtained when the aqueous phase contained phosphoric acid at pH 0.8–2 or pH 3–3.5, depending on the amounts of metal. The method is applicable to both tracer and milligram amounts of molybdenum. The structure of the extracted species was examined by infrared spectroscopy.     

Structural studies on layered alkylpyridinium iodopalladate networks

The reaction of alkylpyridinium (CnH2n + 1NC5H5, hereafter Cn-Py) iodide salts in aqueous acetonitrile with a preformed palladium iodide precursor afforded two different types of organic-inorganic phases depending on the molar ratio. A 2:1 ratio yielded the phase [Cn-Py]2[PdI4] (3, n = 14, 16), which crystallized in the triclinic crystal system. The X-ray crystal structure of 3, (n = 14), refined in the space group P1 (a = 8.918(3) A, b = 9.894(3) A, c = 29.062(12) A, alpha = 93.51(3) degrees, beta = 94.17(3) degrees, gamma = 115.60(3) degrees, and Z = 2), consists of interdigitated bilayers with a basal spacing of 29.0 A. The aliphatic chains of the cations, which run almost parallel to the stacking direction, are fully stretched between polar planes built on isolated [PdI4]2- anions and cation headgroups. Changing the organic cation to palladium ratio to 1:1 led to a new phase [Cn-Py]2[Pd2I6] (4, n = 14, 16), which crystallizes in the triclinic P1 space group (a = 9.399(4) A, b = 14.264(6) A, c = 29.415(13) A, alpha = 92.11(4) degrees, beta = 90.07(4) degrees, gamma = 104.53(3) degrees, Z = 3 for 4(n = 14); a = 9.417(2) A, b = 14.215(3) A, c = 31.552(6) A, alpha = 87.96(3) degrees, beta = 87.63(3) degrees, gamma = 75.67(3) degrees, Z = 3 for 4(n = 16)). The layered structure is basically of a continuously interdigitated single-layer type, with a bilayer sublattice superimposed. Isolated [Pd2I6]2- anions contribute to the inorganic planes. A high degree of interdigitation and tilting of the aliphatic chains lead to basal spacings of 29.4 and 31.5 A for 4(n = 14) and 4(n = 16), respectively. The [Cn-Py]2[PdI4] and [Cn-Py]2[Pd2I6] phases were characterized by thermal analysis. Mesomorphic behavior was observed only for 3(n = 16), which was confirmed by variable-temperature powder XRD and optical microscopy.