Studies on synthetic inorganic ion exchangers-V: preparation, properties and ion-exchange behaviour of amorphous and crystalline thorium tungstate

Amorphous and crystalline thorium tungstate have been prepared by mixing 0.1M thorium nitrate and 0.1M sodium tungstate under different conditions. The physico-chemical properties, chemical stability, composition, TGA, DTA, X-ray, infrared absorption and ion-exchange behaviour of thorium-tungstate are reported and discussed. Distribution coefficients of metal ions on thorium tungstate have been determined at pH 2-3 and 5.5-6.5. Selective ion-exchange separations of bismuth and mercury from other metal ions have been achieved on a column of thorium tungstate.     

Coupling of narrow-bore liquid chromatography to thin-layer chromatography : Part I. Interfacing

The coupling of liquid chromatography (l.c.) on narrow-bore columns to thin-layer chromatography (t.l.c.) is described. The effluent from a l.c. column can be deposited on a t.l.c. plate after a normal-phase or reversed-phase separation without serious loss of chromatographic information. Both silica and alkyl-modified silica plates can be used for storage. The interface is a fused silica capillary which connects the column outlet to the spray jet assembly of a Linomat applicator for t.l.c. The stored chromatogram can serve as starting point for a new separation, but also allows the use of detection principles which are normally not compatible with l.c. The chromatography of some polynuclear aromatic hydrocarbons is used to illustrate the possibilities of the combinations.     

Determination of the boiling-point distribution by simulated distillation from n-pentane through n-tetratetracontane in 70 to 80 seconds

This work presents the carrying out of boiling-point distributions by simulated distillation with direct-column heating rather than oven-column heating. Column-heating rates of 300 degrees C/min are obtained yielding retention times of 73 s for n-tetratetracontane. The calibration curves of the retention time versus the boiling point, in the range of n-pentane to n-tetratetracontane, are identical to those obtained by slower oven-heating rates. The boiling-point distribution of the reference gas oil is compared with that obtained with column oven heating at rates of 15 to 40 degrees C/min. The results show boiling-point distribution values nearly the same (1-2 degrees F) as those obtained with oven column heating from the initial boiling point to 80% distilled off. Slightly higher differences are obtained (3-4 degrees F) for the 80% distillation to final boiling-point interval. Nonetheless, allowed consensus differences are never exceeded. Precision of the boiling-point distributions (expressed as standard deviations) are 0.1-0.3% for the data obtained in the direct column-heating mode.     

Generalized quadrangles in finite projective spaces

If a pointset of the projective spacePG(d,q), together with a lineset ofPG(d,q) form a generalized quadrangleS, thenS is of classical type. This beautiful theorem was proved by F. Buekenhout and C. Lefèvre. In this paper we give a simple proof of this theorem in the cased 4 (we suppose that the result is established ford = 3). We remark that in our proof a central role is played by the theory of subquadrangles.     

On the isomer shifts of129I impurities implanted in semiconductors

Mössbauer spectra of the 27.8 keV transition in¹²⁹I have been measured with sources of^129mTe implanted in - and -tin and - and -SiC. The spectra mainly show two single line components, just as those obtained in earlier investigations with sources of^129mTe implanted in diamond, silicon and germanium. The component with isomer shift corresponding to a decreased s-electron density relative to the I^– ion is attributed to the substitutionally implanted impurities, that with shift corresponding to an increased s-electron density to interstitial impurities. Plots of the shifts of both component show a linear dependence on the lattice constant for diamond, silicon and germanium and -tin. For SiC, however, the shifts are considerably smaller than expected on the basis of this linear dependence. All shifts can be quantitatively understood on the basis of a simple model that attributes the shifts of the interstitial impurities to a compression in the host lattice and shifts of the substitutional impurities to the combined effect of compression and hybridized bonding.     

Research on heterocyclic compounds. XXIII. Phenyl derivatives of fused imidazole systems

The reaction of various heteroarylamines with ethyl 2-benzoyl-2-bromoacetate was used to obtain some imidazo[1,2-a]pyridines, imidazo[1,2-a]pyrimidines, imidazo[2,1-b]thiazoles and imidazo[2,1-b]benzothiazoles characterized by the presence of a phenyl moiety on the imidazole ring. In the case of thiazole and benzothiazole derivatives, unexpected by-products were isolated and their structures elucidated.     

Highly stereoselective addition of stannylcuprates to alkynones

The addition of stannylcuprate reagents such as (Bu3Sn)(PhS)CuLi to alkynones has been found to proceed in high yield and with excellent stereoselectivity for the Z isomer of the product (>95%). The behavior of the stannylcuprates is thus very different from that of their "carbocuprate" counterparts such as Me2CuLi or Me2Cu(CN)Li2 which are nonstereoselective. Furthermore, in contrast to the reactions of (R3Sn)(PhS)CuLi with the corresponding alkynoates, the presence of a proton source in the reaction medium has no effect on the stereoselectivity of the reaction of alkynones.     

Mass spectometry of aralkyl compounds with a functional group—VI1: Mass spectra of 1-phenylethyanol-1, 2-phenylethanol-1 and 1-phenylpropanol-2

Mass spectra of 1-phenylethanol-1 and its analogues, specifically deuterated in the aliphatic chain, suggest that the [M? CH₃]⁺ ion is represented partly by an α-hydroxybenzyl fragment. Moreover, the molecular ion loses successively—after scrambling of all hydrogen atoms, except those of CH₃? a hydrogen atom and C₆H₆, generation the CH₃CO⁺ ion. Diffuse peaks, found in the spectra of of 2-phenylethanol-1 and its analogues, specifically deuterated in the aliphatic chain and in the phenyl ring, show that the molecular ion loses C₂H₄O, possibly via a four-center mechanism, after an exchange of aromatic and hydroxylic hydrogens. Mass spectra of 1-phenylpropanol-2 and its analogues, specifically, deuterated in the aliphatic chain, demonstrate that in the molecular ion exclusively the hydroxyl hydrogen atom is transferred to one of the ortho-positions of the phenyl ring via a McLafferty rearrangement, generating the [M ? C₂H₄O]⁺ ion. Furtherore, an eight-membered ring structure is proposed for the [M ? CH₃]⁺ ion to explain the loss of H₂O and C₂H₂O from this ion after an extensive scrambling of hydrogen atoms.     

Effects of ultrasonic irradiation in flow-injection systems

The effects of ultrasonic irradiation on transport and reactions in several flow-injection manifolds are described. The influences of ultrasound on the physical dispersion of the injected plug is considered. Its effects on systems involving homogeneous (catalytic and non-catalytic) and heterogeneous (liquid/liquid extraction, precipitation) reactions are critically evaluated. In general, greater sensitivity is obtained, especially for heterogeneous systems, slow reactions and low analyte concentrations. Finally, practical considerations and potential uses of the combination of ultrasonic irradiation with flow-injection analysis are discussed.     

Comparative study of measured and critically evaluated resonance intergral to thermal cross-section ratios. Part I

For 13 isotopes, the resonance integral to thermal crosssection ratio was studied. The results of two different methods, applied in two different laboratories, are compared. One method consists in a direct determination of I₀/π₀-values from Cd-ratio measurements, the other is based on the evaluation of literature data, using accurately determined k₀-factors from two irradiation channels with largely different thermal-to-epithermal flux ratios.