Sintokamides A to E, chlorinated peptides from the sponge Dysidea sp. that inhibit transactivation of the N-terminus of the androgen receptor in prostate cancer cells

The new chlorinated peptides sintokamides A to E (1-5) have been isolated from specimens of the marine sponge Dysidea sp. collected in Indonesia. Their structures were elucidated by a combination of spectroscopic and single-crystal X-ray diffraction analyses. Sintokamide A (1) is an inhibitor of N-terminus transactivation of the androgen receptor in prostate cancer cells.     

Controlling Gas Selectivity in Molecular Porous Liquids by Tuning the Cage Window Size

Control of pore window size is the standard approach for tuning gas selectivity in porous solids. Here, we present the first example where this is translated into a molecular porous liquid formed from organic cage molecules. Reduction of the cage window size by chemical synthesis switches the selectivity from Xe‐selective to CH₄‐selective, which is understood using ¹²⁹Xe, ¹H, and pulsed‐field gradient NMR spectroscopy.     

Peak alignment of urine NMR spectra using fuzzy warping

Proton nuclear magnetic resonance (1H NMR) spectroscopic analysis of mixtures has been used extensively for a variety of applications ranging from the analysis of plant extracts, wine, and food to the evaluation of toxicity in animals. For example, NMR analysis of urine samples has been used extensively for biomarker discovery and, more simply, for the construction of classification models of toxicity, disease, and biochemical phenotype. However, NMR spectra of complex mixtures typically show unwanted local peak shifts caused by matrix and instrument variability, which must be compensated for prior to statistical analysis and interpretation of the data. One approach is to align the spectral peaks across the data set. An efficient and fast warping algorithm is required as the signals typically contain ca. 32,000-64,000 data points and there can be several thousand spectra in a data set. As demonstrated in our study, the iterative fuzzy warping algorithm fulfills these requirements and can be used on-line for an alignment of the NMR spectra. Correlation coefficients between the aligned and target spectra are used as the evaluation function for the algorithm, and its performance is compared with those of other published warping methods.     

Synthetic studies directed toward the proposed structure for heteroscyphic acid A

A route to the carbon skeleton of the proposed structure for heteroscyphic acid A was developed utilizing a Mn(III)/Cu(II) mediated oxidative free-radical cyclization and nucleophilic addition to (3-methylpentadienyl)iron(1+) cation.     

Fluorescent sensor array in a microfluidic chip

Miniaturization and automation are highly important issues for the development of high-throughput processes. The area of micro total analysis systems (muTAS) is growing rapidly and the design of new schemes which are suitable for miniaturized analytical devices is of great importance. In this paper we report the immobilization of self-assembled monolayers (SAMs) with metal ion sensing properties, on the walls of glass microchannels. The parallel combinatorial synthesis of sensing SAMs in individually addressable microchannels towards the generation of optical sensor arrays and sensing chips has been developed. [figure: see text] The advantages of microfluidic devices, surface chemistry, parallel synthesis, and combinatorial approaches have been merged to integrate a fluorescent chemical sensor array in a microfluidic chip. Specifically, five different fluorescent self-assembled monolayers have been created on the internal walls of glass microchannels confined in a microfluidic chip.     

A microfluidic membrane chip for in situ fouling characterization

A new method for non-invasive in situ monitoring of a microfiltration process is described. In microfiltration systems, local information on the deposition characteristics can be used to determine the cake behavior during a filtration run. Typically, non-invasive methods of fouling study are restricted to specialized membranes, or require highly complex systems. This study employs the use of synthetic embedded channel membranes, with channels separated by a porous structure (active membrane). The characteristics of the active membrane have been analyzed. Deposition on the membrane surface can be observed and monitored optically across the width of the feed channel. This can be used to observe the liquid hydrodynamics in the channel as well as the local cake properties in time. In dead end filtration, it has been observed that with 6 μm particles, the cake initially deposits towards the end of the membrane. However, as filtration continues, the deposition changes with more local deposition towards the channel entrance, leading to a more homogeneous cake layer.     

Capillary electrophoresis-mass spectrometry of intact basic proteins using Polybrene-dextran sulfate-Polybrene-coated capillaries: System optimization and performance

A capillary electrophoresis-mass spectrometry (CE-MS) method using sheath liquid electrospray ionization interfacing was studied and optimized for the analysis of intact basic proteins. To prevent protein adsorption, capillaries with a noncovalent positively charged coating were utilized. Capillaries were coated by subsequent rinsing with solutions of Polybrene, dextran sulfate and Polybrene. The coating proved to be fully compatible with MS detection, causing no background signals and ionization suppression. The composition of the sheath liquid and BGE was optimized using the model proteins α-chymotrypsinogen A, ribonuclease A, lysozyme and cytochrome c. A sheath liquid of isopropanol-water-acetic acid (75:25:0.1, v/v/v) at 2 μL min⁻¹ resulted in optimal signal intensities for most proteins, but caused dissociation of the heme group of cytochrome c. Optimum protein responses were obtained with a BGE of 50 mM acetic acid (pH 3.0), which allowed a baseline separation of the test protein mixture. Several minor impurities present in the mixture could be detected and provisionally identified using accurate mass and a protein modification database. The selectivity of the CE-MS system was investigated by the analysis of acetylated lysozyme. Eight highly related species, identified as non-acetylated lysozyme and lysozyme acetylated in various degrees, could be distinguished. The CE-MS system showed good reproducibility yielding interday (three weeks period) RSDs for migration time and peak area within 2% and 10%, respectively. With the CE-MS system, determination coefficients (R²) for protein concentration and peak area were higher than 0.996, whereas detection limits were between 11 and 19 nM.     

Localization of Fatty Acyl and Double Bond Positions in Phosphatidylcholines Using a Dual Stage CID Fragmentation Coupled with Ion Mobility Mass Spectrometry

A high content molecular fragmentation for the analysis of phosphatidylcholines (PC) was achieved utilizing a two-stage [trap (first generation fragmentation) and transfer (second generation fragmentation)] collision-induced dissociation (CID) in combination with travelling-wave ion mobility spectrometry (TWIMS). The novel aspects of this work reside in the fact that a TWIMS arrangement was used to obtain a high level structural information including location of fatty acyl substituents and double bonds for PCs in plasma, and the presence of alkali metal adduct ions such as [M?+?Li]⁺ was not required to obtain double bond positions. Elemental compositions for fragment ions were confirmed by accurate mass measurements. A very specific first generation fragment ion m/z 577 (M-phosphoryl choline) from the PC [16:0/18:1 (9Z)] was produced, which by further CID generated acylium ions containing either the fatty acyl 16:0 (C₁₅H₃₁CO⁺, m/z 239) or 18:1 (9Z) (C₁₇H₃₃CO⁺, m/z 265) substituent. Subsequent water loss from these acylium ions was key in producing hydrocarbon fragment ions mainly from the α-proximal position of the carbonyl group such as the hydrocarbon ion m/z 67 (+H₂C-HC?=?CH-CH?=?CH₂). Formation of these ions was of important significance for determining double bonds in the fatty acyl chains. In addition to this, and with the aid of ¹³C labeled lyso-phosphatidylcholine (LPC) 18:1 (9Z) in the ω-position (methyl) TAP fragmentation produced the ion at m/z 57. And was proven to be derived from the α-proximal (carboxylate) or distant ω-position (methyl) in the LPC.     

Fouling behavior of microstructured hollow fiber membranes in dead-end filtrations: critical flux determination and NMR imaging of particle deposition

The fouling behavior of microstructured hollow fibers was investigated in constant flux filtrations of colloidal silica and sodium alginate. It was observed that the fouling resistance increases faster with structured fibers than with round fibers. Reversibility of structured fibers' fouling was similar during silica filtrations and better in sodium alginate filtrations when compared with round fibers. The deposition of two different silica sols on the membranes was observed by NMR imaging. The sols had different particle size and solution ionic strength and showed different deposition behaviors. For the smaller particle-sized sol in deionized solution (Ludox-TMA), there was more deposition within the grooves of the structured fibers and much less on the fins. For the alkali-stabilized sol Bindzil 9950, which had larger particles, the deposition was homogeneous across the surface of the structured fiber, and the thickness of the deposit was similar to that on the round fiber. This difference between the deposition behavior of the two sols is explained by differences in the back diffusion, which creates concentration polarization layers with different resistances. The Ludox sol formed a thick polarization layer with very low resistance. The Bindzil sol formed a slightly thinner polarization layer; however, its resistance was much higher, of similar magnitude as the intrinsic membrane resistance. This high resistance of the polarization layer during the Bindzil sol filtration is considered to lead to quick flow regulation toward equalizing the resistance along the fiber surface. The Ludox particles were trapped at the bottom of the grooves as a result of reduced back diffusion. The fouling behavior in sodium alginate filtrations was explained by considering the size-dependent deposition within the broad alginate size distribution. The better reversibility of fouling in the structured fibers is thought to be the result of a looser deposit within the grooves, which is more easily removed than a compressed deposit on the round fibers.     

Lewis acid double metal cyanide catalysts for hydroamination of phenylacetylene

Double metal cyanides (DMCs) are highly active recyclable heterogeneous catalysts for hydroamination of phenylacetylene with 4-isopropylaniline. The best hydroamination yields are obtained with Zn-Co DMCs, especially if the particle size is decreased by a reverse emulsion synthesis technique.