Comparing electrocatalytic hydrogen and oxygen evolution activities of first-row transition metal complexes with similar coordination environments

Developing cheap and efficient electrocatalysts for water splitting is required for energy conversion tech-niques.Many first-row transition metal complexes have...     

Generalized Einstein relation and the Metzler-Klafter conjecture in a composite-subdiffusive regime

In this paper, a generalized diffusion model driven by the composite-subdiffusive fractional Brownian motion (FBM) is employed. Based on this stochastic process, we derive a fractional Fokker-Planck equation (FFPE) and obtain its solution. It is proved that the Generalized Einstein Relation (GER) and the Metzler and Klafter conjecture on the asymptotic behavior of stretched Gaussian hold the FFPE in a composite-subdiffusive regime.     

全氟辛酸致小鼠肝脏氧化损伤的实验

研究了低（1mg/kg/d）、中（5mg/kg/d）、高（25mg/kg/d）三个剂量组全氟辛酸（Perfluorooctanoic acid,PFOA）致小鼠肝脏脂质过氧化损伤的作用.结果发现,PFOA能抑制小鼠体重的增长,对肝组织造成一定的脂质过氧化损伤.各组小鼠出现不同程度的体重增长缓慢甚至减轻,中、高剂量组出现明显的减轻（P＜0.01）;低、中、高剂量组肝脏系数,均明显高于对照组（P＜0.01）;与对照组相比,各剂量组的肝组织中MDA、NO及LDH含量明显增高,SOD、SDH及GSH-Px活性均明显降低（P＜0.05）.     

A novel accurate and expandable infrared radiation transmission effect computing service

In infrared imaging simulation system, the infrared radiation transmission is significantly affected by natural environment. Attenuation and blurring are introduced by atmospheric environment impacts on the transmission process from zero sight infrared radiation to the detector. The classic IR transmission calculation methods have been intensively studied and many applicable approaches are proposed. The novel IR transmission effect computing service introduced in this paper could render accurate and expandable IR simulation result based on synthetic natural environment, especially concerning the atmosphere effects imposed on the IR transmission process. A simulation architecture is constructed and supports an infrared imaging simulation system for the IR transmission process calculation. The environment representation approach and the transmission effect calculation method were elaborated. Simulation experiment was carried out and the result was shown to be more accurate than that of conventional MODTRAN based atmosphere transmission simulation results. The two results are both compared with the physically captured image. The comprehensive simulation experiment results are implied to be competent and offered an applicable solution for the infrared imaging simulation system. Furthermore, this interdisciplinary simulation method can be extended to other synthetic natural environment supported military simulation and further serve the large-scale distributed collaborative combat simulation.     

Preparation of F-doped titania nanoparticles with a highly thermally stable anatase phase by alcoholysis of TiCl4

Pure anatase is a metastable phase and inclined to (transform) be transformed into rutile structure under heating over than 500 °C, which limits its suitability for high-temperature applications. Hitherto much research efforts have been made to increase the stability temperature of anatase structure. However, metallic doping usually introduced metallic oxides into titania at high temperature, and many nonmetallic doping are not competent for increasing the stability temperature of anatase structure up to 900 °C. In this study, F-doped anatase TiO₂ nanoparticles were conveniently prepared via the alcoholysis of TiCl₄ and the as-prepared product shows very high stability temperature up to 1000 °C before being transformed into rutile structure phase. On the basis of XPS results of F-doped titania annealed at different temperature, it is learned that the F atoms were anchored on the crystal planes of anatase in favor of decreasing the energy faces of anatase and stabilizing the anatase structure till annealed at 1300 °C all the anatase were transformed into rutile phase.     

Wintersweet Branch‐Like C/C@SnO2/MoS2 Nanofibers as High‐Performance Li and Na‐Ion Battery Anodes

Structure and morphology of molybdenum disulfide (MoS₂) play an important role in improving its reversible lithium storage and sodium storage as anodes. In this study, a facile method is developed to prepare C/C@SnO₂/MoS₂ nanofibers with MoS₂ nanoflakes anchoring on the core–shell C/C@SnO₂ nanofibers through hydrothermal reaction. By adjusting the concentration of MoS₂ precursors, the synthesized MoS₂ with different slabs dimensions, size, and morphologies are obtained, constituting budding and blooming wintersweet branch‐like composite structure, respectively. Owing to scattered MoS₂ nanoparticles and sporadic MoS₂ nanoflakes, the budding wintersweet branch‐like composite nanofibers processes less slabs of staking in number and large specific surface area. Benefiting from the exposed C@SnO₂ shell layer, the synergistic effect among SnO₂, carbon, and MoS₂ is strengthened, which maximizes the advantage of each material to exhibit stable specific capacities of 650 and 230 mAh g^?1 for Li‐ion batteries and Na‐ion batteries after 200 cycles.     

Optimized permeation and antifouling of PVDF hybrid ultrafiltration membranes: synergistic effect of dispersion and migration for fluorinated graphene oxide

Nanoparticles may have suffered from low modification efficiency in hybrid membranes due to embedding and aggregating in polymer matrix. In order to analyze the modification mechanisms of nanoparticle migration and dispersion on the properties of hybrid membranes, we designed different F/O ratios (R _F/O ) of fluorinated graphene oxide (FGO, diameter = 1.5 ~ 17.5 μm) by carbon tetrafluoride (CF₄) plasma treatment GO for 3, 5, 10, 15, and 20 min and successfully prepared novel PVDF hybrid membranes containing FGO via the phase inversion method. After a prolonged plasma treatment, the R _F/O of FGO was enhanced sharply, indicating an increasing compatibility of FGO with the matrix, especially FGO-20 (GO treated for 20 min). FGO contents in the top layer, sublayer, and the whole of membranes were probed by X-ray photoelectron spectroscopy, energy-dispersive spectrometer, and indirect computation, respectively. In the top layer of membranes, FGO contents declined from 13.14 wt% (PVDF/GO) to 4.00 wt% (PVDF/FGO-10) and 1.96 wt% (PVDF/FGO-20) due to the reduced migration ability of FGO. It is worth mentioning that PVDF/FGO-10 membranes exhibited an excellent water flux and flux recovery rate (up to 406.90 L m^?2 h^?1 and 88.9%), which were improved by 67.3% and 14.6% and 52.5% and 24.0% compared with those of PVDF/GO and PVDF/FGO-20 membranes, respectively, although the dispersion and migration ability of FGO-10 was maintained at a moderate level. It indicated that the migration and dispersion of FGO in membranes could result in dynamic equilibrium, which played a key role in making the best use of nanomaterials to optimize membrane performance.     

Experimental study on the phase change and thermal properties of paraffin/carbon materials based thermal energy storage materials

In order to enhance the thermal energy storage efficiency of phase change materials, in this paper, expanded graphite (EG), multi-layer graphene nanoplatelet (MGN), graphite powder (GP) and multi-walled carbon nanotube (MWCNT) as the effective heat transfer promoters in different mass fraction (0.1, 0.5, 1.0, 1.5 and 2.5 wt.%) were added into the paraffin. The chemical properties, latent heat capacities, thermal conductivities and heat storage performances of paraffin and the composites were investigated. The results showed that the addition of EG, MGN, GP and MWCNT could increase the thermal conductivity of paraffin. At 20 °C, the thermal conductivity of the paraffin was increased by 61.04%, 51.2%, 12.18% and 10.22% with 2.5 wt.% EG, MGN, GP and MWCNT, respectively. In addition, with the same mass fraction, the heat storage and release time of the composite were 56.03% and 54.26%, respectively, shorter than that of paraffin when the additive was EG.     

Fabrication of gradient refractive index ball lenses using the method of combination of ion exchanging and sagging

Based on the Fick’s diffusion equations, the distribution function of refractive index of a gradient refractive index ball lens (GRIN ball lens/GBL) is derived. Lithium containing silicate glass is fabricated and GRIN ball lenses (GBLs) which diameters are from 0.3 mm to 3.0 mm are made by the method of combination of Ion exchanging and sagging in sodium nitrate. Refractive index profiles of these GBLs are measured by interferometer, and the performances such as effective focal length (EFL), back focal length (BFL) and numerical aperture (NA) between GBLs and homogeneous ball lenses (HBLs) are compared. Results show that the distribution of the index of refraction is parabolic curve and its Δn is about 0.0002, the performances of the former are super to the latter.