Optimization of facet coating for highly strained InGaAs quantum well lasers operating at 1200 nm

The optical output power of a laser diode can be enhanced by anti-reflection (AR) and high-reflection (HR) facet coatings, respectively, at the front and back facet. AR and HR coatings also serve the purpose of protection and passivation of laser diode facets. In this work, we have designed and optimized a single layer λ/4 thick Al₂O₃ film for the AR coating and a stack of λ/4 thick Al₂O₃/λ/4 thick Si bi-layers for the HR coating for highly strained InGaAs quantum-well edge emitting broad area (BA) laser diodes. Effect of the front and back facet reflectivities on output power of the laser diodes has been studied. The light output versus injected current (L–I characteristics) measurements were carried out on selected devices before and after the facet coatings. We have also carried out the numerical simulation and analysis of L–I characteristics for this particular diode structure. The experimental results have been compared and verified with the numerical simulation.     

Prediction of Γ-L and L-X crossovers in Ga<Subscript>x</Subscript>Al<Subscript>1-x</Subscript>Sb alloys by empirical pseudopotential method

Using empirical pseudopotential method Γ-L crossover is found for the Ga_0.74Al_0.26Sb. The conduction band minimum is observed to switch at the (0.87, 0, 0) point for Ga_0.51Al_0.49Sb which shifts to the X point for Ga_0.21Al_0.79Sb and remains at X leading finally to indirect band gap in AlSb. Band structure calculations for a large number of alloys are performed and bowing parameters b_X and b_L are proposed for the E_X and E_L respectively. Our findings may serve as directive to select the materials in a range of composition to examine the bowing parameters and thereby effective mass experimentally for the Ga_xAl_1-xSb alloys.     

Branching fractions for psi(2S)-to-J/psi transitions

We describe new measurements of the inclusive and exclusive branching fractions for psi(2S) transitions to J/psi using e(+)e(-) collision data collected with the CLEO detector operating at CESR. All branching fractions and ratios of branching fractions reported here represent either the most precise measurements to date or the first direct measurements. Indirectly and in combination with other CLEO measurements, we determine B(chi(cJ) --> gamma(J/psi)) and B[psi(2S) --> light hadrons].     

5 MeV Proton irradiation effects on 200 GHz silicon–germanium heterojunction bipolar transistors

The total dose effects of 5?MeV proton and Co-60 gamma irradiation in the dose range from 1 to 100?Mrad on advanced 200?GHz Silicon–Germanium heterojunction bipolar transistors (SiGe HBTs) are investigated. The SRIM simulation study was conducted to understand the energy loss of 5?MeV proton ions in SiGe HBT structure. Pre- and post-radiation DC figure of merits such as forward- and inverse-mode Gummel characteristics, excess base current, DC current gain and output characteristics were used to quantify the radiation tolerance of the devices. The results show that the proton creates a significant amount of damages in the surface and bulk of the transistor when compared with gamma irradiation. The SiGe HBTs shows robust ionizing radiation tolerance even up to a total dose of 100?Mrad for both radiations.     

Effect of pressure on optical and electrical properties of tungsten diselenide single crystals

Optical absorption spectra of tungsten diselenide (WSe₂) single crystals subjected to different values of pressure (0, 2, 4 and 6 GPa) were obtained in the spectral range 700–1450 nm with the help of a UV–VIS–NIR spectrophotometer. The spectra were thoroughly analyzed in the absorption edge region for obtaining direct as well as indirect band gaps in this material. The high temperature resistivity and thermoelectric power on WSe₂ single crystals at various pressures were also studied. The results and their implications are discussed in the article.     

Studies in\bar p p annihilation

Evidence is presented that \(\bar p\) p annihilation proceeds via the formation of two jets, with average transverse momentum of the order of the nucleon mass. The implications of this behaviour is linked to the measured cross sections and multiplicities, and explanations for it have been sought in the underlying gluon and quark constituents of the \(\bar p\) p system. The confrontation of the suggested constituent mechanisms and experimental data lead to the concept that charm meson production may play a significant role in the \(\bar p\) p experiments at the highest available energies.     

Laser photoacoustic spectroscopy helps fight terrorism: High sensitivity detection of chemical Warfare Agent and explosives

Tunable laser photoacoustic spectroscopy is maturing rapidly in its applications to real world problems. One of the burning problems of the current turbulent times is the threat of terrorist acts against civilian population. This threat appears in two distinct forms. The first is the potential release of chemical warfare agents (CWA), such as the nerve agents, in a crowded environment. An example of this is the release of Sarin by Aum Shinrikyo sect in a crowded Tokyo subway in 1995. An example of the second terrorist threat is the ever-present possible suicide bomber in crowded environment such as airports, markets and large buildings. Minimizing the impact of both of these threats requires early detection of the presence of the CWAs and explosives. Photoacoustic spectroscopy is an exquisitely sensitive technique for the detection of trace gaseous species, a property that Pranalytica has extensively exploited in its CO2 laser based commercial instrumentation for the sub-ppb level detection of a number of industrially important gases including ammonia, ethylene, acrolein, sulfur hexafluoride, phosphine, arsine, boron trichloride and boron trifluoride. In this presentation, I will focus, however, on our recent use of broadly tunable single frequency high power room temperature quantum cascade lasers (QCL) for the detection of the CWAs and explosives. Using external grating cavity geometry, we have developed room temperature QCLs that produce continuously tunable single frequency CW power output in excess of 300 mW at wavelengths covering 5μm to 12μm. I will present data that show a CWA detection capability at ppb levels with false alarm rates below 1:108. I will also show the capability of detecting a variety of explosives at a ppb level, again with very low false alarm rates. Among the explosives, we have demonstrated the capability of detecting homemade explosives such as triacetone triperoxide and its liquid precursor, acetone which is a common household liquid. This capability, deployed at airports and other public places, will go a long way towards increasing public safety and minimizing inconveniences faced in airline travel.     

Influence of using nanoobjects as filler on functionality-based energy use of nanocomposites

The goal of our study was to investigate the potential benefits of reinforcing polymer matrices with nanoobjects for structural applications by looking at both the mechanical properties and environmental impacts. For determining the mechanical properties, we applied the material indices defined by Ashby for stiffness and strength. For the calculation of environmental impacts, we applied the life cycle assessment methodology, focusing on non-renewable energy use (NREU). NREU has shown to be a good indicator also for other environmental impacts. We then divided the NREU by the appropriate Ashby index to obtain the ‘functionality-based NREU’. We studied 23 different nanocomposites, based on thermoplastic and thermosetting polymer matrices and organophilic montmorillonite, silica, carbon nanotubes (single-walled and multiwalled) and calcium carbonate as filler. For 17 of these, we saw a decrease of the functionality-based NREU with increasing filler content. We draw the conclusion that the use of nanoobjects as filler can have benefits from both an environmental point of view and with respect to mechanical properties.     

Depth-resolved fluorescence measurement in a layered turbid medium by polarized fluorescence spectroscopy

We show that, when a turbid medium with a layered fluorophore distribution is excited by linearly polarized light, measurement of angle-resolved polarized fluorescence can provide depth-resolved fluorescence measurements.     

Conceptions of function translation: obstacles, intuitions, and rerouting

A horizontal translation of a function is the focus of this study. We examine the explanations provided by secondary school students and secondary school teachers to a translation of a function, focusing on the example of the parabola y=(x−3)² and its relationship to y=x². The participants’ explanations focused on attending to patterns, locating the zero of the function, and the point-wise calculation of function values. The results confirm that the horizontal shift of the parabola is, at least initially, inconsistent with expectations and counterintuitive to most participants. We articulate possible sources of this perceived inconsistency and describe a pedagogical approach aimed at resolving it.