Hydrothermal synthesis and magnetic properties of novel Mn(II) and Zn(II) materials with thiolato-carboxylate donor ligand frameworks

The hydrothermal reaction of thiosalicylic acid, (C(6)H(4)(CO(2)H)(SH)-1,2) with manganese(III) acetate leads to formation of the coordination solid [Mn(5)((C(6)H(4)(CO(2))(S)-1,2)(2))(4)(mu3-OH)2] (1) via a redox reaction, where resulting manganese(II) centres are coordinated by oxygen donor atoms and S-S disulfide bridge formation is simultaneously observed. Reaction of the same ligand under similar conditions with zinc(II) chloride yields the layered coordination solid [Zn(C(6)H(4)(CO(2))(S)-1,2)] (2). Hydrothermal treatment of manganese(III) acetate with 2-mercaptonicotinic acid, (NC(5)H(3)(SH)(CO(2)H)-2,3) was found to produce the 1-dimensional chain structure [Mn(2)((NC(5)H(3)(S)(CO(2))-2,3)(2))(2)(OH(2))(4)].4H(2)O (3) which also exhibits disulfide bridge formation and oxygen-only metal interactions. Compound 3 has been studied by thermogravimetric analysis and indicates sequential loss of lattice and coordinated water, prior to more comprehensive ligand fragmentation at elevated temperatures. The magnetic behaviour of 1 and 3 has been investigated and both exhibit antiferromagnetic interactions. The magnetic behaviour of 1 has been modelled as two corner-sharing isosceles triangles whilst 3 has been modelled as a 1-dimensional chain.     

Comment: 2004's fastest organic and biomolecular chemistry!

In January 2003, the Royal Society of Chemistry launched Organic & Biomolecular Chemistry (OBC)--a journal promising to provide high quality research from all aspects of synthetic, physical and biomolecular organic chemistry. The journal was set to build upon the foundations laid down by its predecessor publications (J. Chem. Soc., Perkin Trans. 1 and J. Chem. Soc., Perkin Trans. 2) as well as complement the subject coverage already published in prestigious general chemistry journals such as Chemical Communications and Chemical Society Reviews. Nearly two years on, just how is the programme developing and what can the community expect to see from the Royal Society of Chemistry (RSC)?     

Determination of the thermodynamic excess functionsG E,H E,andS E of the liquid ternary system AgCl—LiCl—KCl by means of EMF-measurements

By means of EMF-measurements using the formation cell $$graphite/Ag/AgCl(l,x_{AgCl} ) - LiCl(l,x_{LiCl} ) - KCl x_{KCl} /(Cl_2 )graphite$$ the partial molar excessGibbs energies,G _AgCl ^E , of silver chloride in the ternary system AgCl?LiCl?KCl were determined over the whole concentration range at five temperatures between 973 K and 1,123 K. The experimentally determinedG _AgCl ^E -values were fitted using theRedlich-Kister equation. From theRedlich-Kister parameters and their temperature dependence, obtained by the fitting procedure, the integral and partial molar excessGibbs energies, heats of mixing, and excess entropies were calculated. The fitting process permits also the calculation of the thermodynamic excess function of the binary system lithium chloride—potassium chloride.     

Formation of carbon oxides during tobacco combustion: Pyrolysis studies in the presence of isotopic gases to elucidate reaction sequence

During the combustion of tobacco, carbon monoxide is formed by the thermal decomposition of tobacco with primary products such as carbon dioxide and water. These three processes occur in parallel and are interdependent. The temperature ranges over which each process occurs, and their relative importance have been assessed by pyrolysing tobacco in the presence of various isotopically labelled gases. Non-isothermal pyrolyses were conducted at a heating rate of 1.6 K s^?1 up to 1000°C, with the products analysed by mass spectrometer.Pyrolysis in the presence of oxygen-18 indicates that combustion of tobacco starts at 180°C. Carbon dioxide and water are formed by combustion at 180°C, while carbon monoxide is not formed as a combustion product until 460°C. The quantities of carbon monoxide and dioxide formed by thermal decomposition of tobacco above 400°C are significantly reduced by the occurrence of combustion.Pyrolysis in the presence of carbon-13 dioxide or carbon dioxide-18 shows that its major reaction, endothermic reduction to form carbon monoxide begins at 450°C. Pyrolysis in an oxygen-18/carbon-13 dioxide atmosphere has shown that this endothermic reduction of carbon dioxide occurs in parallel with the strongly exothermic oxidising reactions. 30% of the total carbon monoxide formed was produced by thermal decomposition of the tobacco. 36% was produced by combustion of the tobacco, and at least 23% was produced via carbon dioxide. The remainder was produced by an interaction of the carbon dioxide reduction and the oxidation. Similar proportion would be expected inside the reaction zone of a burning cigarette.Pyrolysis in the presence of heavy water has shown that the major reaction of the water is to quantitatively produce carbon monoxide and hydrogen above 600°C. Considerable isotopic exchange reactions also occur. Pyrolysis in the presence of carbon monoxide-18 has shown that carbon monoxide reacts with tobacco to a small extent at temperatures above 220°C mainly to abstract oxygen combined in the tobacco and produce carbon dioxide.A sequence of general chemical steps for the production of the carbon oxides and water during tobacco combustion has been deduced. This is based on the present work together with considerations of previously published studies on graphite and coal reactions.     

Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes

Alpha-hydroxyketones undergo MnO2-mediated oxidation followed by in situ trapping with aromatic or aliphatic 1,2-diamines to give quinoxalines or dihydropyrazines, respectively, in a one pot procedure which avoids the need to isolate the highly reactive 1,2-dicarbonyl intermediates. Modifications of the procedure allow the formation of pyrazines and piperazines.     

Application of solid phase microextraction in the determination of paralytic shellfish poisoning toxins

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.     

Acrylonitrile polymerization by Cy3PCuMe and (Bipy)2FeEt2

Cy(3)PCuMe (1) undergoes reversible ligand redistribution at low temperature in solution to form the tight ion pair [Cu(PCy(3))(2)][CuMe(2)] (3). The structure of 3 was assigned on the basis of (i) the stoichiometry of the 1 = 3 equilibrium, (ii) the observation of a triplet for the PCy(3) C1 (13)C NMR resonance due to virtual coupling to two (31)P nuclei, and (iii) reverse synthesis of 1 by combining separately generated Cu(PCy(3))(2)(+) and CuMe(2)(-) ions. Complex 1 and [Cu(PCy(3))(2)][PF(6)] (5) coordinate additional PCy(3) to form (Cy(3)P)(2)CuMe and [Cu(PCy(3))(3)][PF(6)], respectively, while 3 does not. Complex 1, free PCy(3), and (bipy)(2)FeEt(2) (2) each initiate the polymerization of acrylonitrile. In each case, the polyacrylonitrile contains branches that are characteristic of an anionic polymerization mechanism. The major initiator in acrylonitrile polymerization by 1 is PCy(3), which is liberated from 1. A transient iron hydride complex is proposed to initiate acrylonitrile polymerization by 2.     

Evaluation of enzymatic digestion and liquid chromatography-mass spectrometry peptide mapping of the integral membrane protein bacteriorhodopsin

A method for the complete peptide mapping of the model integral membrane protein bacteri-orhodopsin is demonstrated. Utilizing more effective enzymatic digestion, procedures with capillary liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) and tandem mass spectrometry (MS/MS), all predicted tryptic digestion products were detected, as well as peptides from all previously reported post-translational modifications of bacteriorhodopsin. A significant contribution of chymotryptic-like digestion products was also observed. A characterization of the behavior of hydrophobic integral membrane peptides in a reversed-phase liquid chromatographic separation is also provided. The method reported here offers improved compatibility of the solubilizing reagents with both the chromatography and mass spectrometry, rendering it suitable for high-throughput proteomic applications.     

Studies of chromium cages and wheels

Studies of two distinct classes of chromium(III) cage complexes are discussed. The first are compact oxo- and carboxylate cages, made by heating precursors to high temperature under a flow of nitrogen. One of these cages, [Cr₁₂O₉(OH)₃(O₂CCMe₃)₁₅], has an S = 6 spin ground state which proves a very interesting subject for study by EPR and MCD spectroscopy. Use of other carboxylates leads to other octa- and dodeca-nuclear complexes. The second class of compounds are homo- and hetero-metallic wheels and chains bridged by fluoride and carboxylates. These include the first heterometallic anti-ferromagnetically coupled ring systems and are being widely studied in areas as diverse as magnetic cooling and quantum information processing. The mechanism by which these unusual cyclic and acyclic structures form is discussed.