Reveal Listeria 2.0 test for detection of Listeria spp. in foods and environmental samples

A Performance Tested Method validation study was conducted for a new lateral flow immunoassay (Reveal Listeria 2.0) for detection of Listeria spp. in foods and environmental samples. Results of inclusivity testing showed that the test detects all species of Listeria, with the exception of L. grayi. In exclusivity testing conducted under nonselective growth conditions, all non-listeriae tested produced negative Reveal assay results, except for three strains of Lactobacillus spp. However, these lactobacilli are inhibited by the selective Listeria Enrichment Single Step broth enrichment medium used with the Reveal method. Six foods were tested in parallel by the Reveal method and the U.S. Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) reference culture procedure. Considering data from both internal and independent laboratory trials, overall sensitivity of the Reveal method relative to that of the FDA/BAM procedure was 101%. Four foods were tested in parallel by the Reveal method and the U.S. Department of Agriculture-Food Safety and Inspection Service (USDA-FSIS) reference culture procedure. Overall sensitivity of the Reveal method relative to that of the USDA-FSIS procedure was 98.2%. There were no statistically significant differences in the number of positives obtained by the Reveal and reference culture procedures in any food trials. In testing of swab or sponge samples from four types of environmental surfaces, sensitivity of Reveal relative to that of the USDA-FSIS reference culture procedure was 127%. For two surface types, differences in the number of positives obtained by the Reveal and reference methods were statistically significant, with more positives by the Reveal method in both cases. Specificity of the Reveal assay was 100%, as there were no unconfirmed positive results obtained in any phase of the testing. Results of ruggedness experiments showed that the Reveal assay is tolerant of modest deviations in test sample volume and device incubation time.     

Diversification of a β-Lactam Pharmacophore via Allylic C-H Amination: Accelerating Effect of Lewis Acid Co-Catalyst

This report describes the use of Pd(II)/bis-sulfoxide 1 catalyzed intra- and intermolecular allylic C-H amination reactions to rapidly diversify structures containing a sensitive β-lactam core similar to that found in the monobactam antibiotic Aztreonam. Pharmacologically interesting oxazolidinone, oxazinanone, and linear amine motifs are rapidly installed with predictable and high selectivities under conditions that use limiting amounts of substrate. Additionally, we demonstrate for the first time that intramolecular C-H amination processes may be accelerated using catalytic amounts of a Lewis acid co-catalyst [Cr(III)(salen)Cl 2].     

Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

Shaping Solid-State Supramolecular Cavities: Chemically Induced Accordionlike Movement of gamma-Zirconium Phosphate Containing Polyethylenoxide Pillars

The hydrophilic oxygen atoms of polyethylenoxide chains inserted as pillars in gamma-zirconium phosphate form hydrogen bonds with the acid groups of the host. As a result the pillars are almost perpendicular to the gamma layers. Upon changing the pH level of the supernatant solution the hydrogen bonds are broken and the pillars become almost perpendicular to the layers (shown schematically). Thus there is a reversible enlargement-shortening of the interlayer space.     

Synthesis of diblock copolymers by combination of organocatalyzed ring‐opening polymerization and atom transfer radical polymerization using trichloroethanol as a bifunctional initiator

This study reports an application of trichloroethanol (TCE) as a bifunctional initiator for the synthesis of block copolymers (BCPs) by organocatalyzed ring‐opening polymerization (OROP) and atom transfer radical polymerization (ATRP). TCE was employed to synthesize a low dispersity poly (valerolactone) macroinitiator, which was subsequently used for the ATRP of tert‐butyl methacrylate. While it is known that TCE can serve as an initiator in ATRP, the ability to induce polymerization under OROP is reported for the first time. The formation of well‐defined BCPs was confirmed by gel permeation chromatography and ¹H NMR. Computational studies were performed to obtain a molecular‐level understanding of the ring‐opening polymerization mechanism involving TCE as initiator. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 563–569     

Highly stereoselective addition reactions of metallated trans-1,3-dithiane-1,3-dioxide to aldehydes

The sodium anion of trans-1,3-dithiane-1,3-dioxide reacts with unhindered aromatic and heteroaromatic aldehydes to give adducts with 95:5 to 97:3 diastereoselectivity.     

Effects of wavelength, pulse duration and power density on laser activation of glassy carbon electrodes

The hypothesis that laser activation of glassy carbon (GC) electrodes is thermally driven was investigated by comparing simulated surface temperatures for several lasers and experimental conditions. Assuming no phase changes, the surface temperature vs. time profile for a laser pulse striking a GC electrode was predicted by finite difference simulation. It was predicted that peak surface temperature depends on power density, wavelength, pulse duration and the optical properties of the carbon. Experimentally, laser activation is weakly wavelength dependent for ascorbic acid and Fe . The surface temperatures required for activation were consistent for different lasers, supporting the conclusion that laser activation is thermally driven. Furthermore, predicted surface temperatures during activation were below the melting point of carbon but well above the boiling point of water. The results should be useful for predicting the effectiveness of different laser conditions on electron transfer activation.     

A generalization of the method of stimulated emission pumping

Drawing on the results of an analysis of the nature of the pulse that generates complete transfer of population from one to another level in a system with a discrete spectrum, a generalization of the method of stimulated emission pumping is proposed. It is shown that a small subset of the Fourier components of the optimal pulse will, if their relative amplitudes are the same as in the optimal pulse, generate almost as efficient a population transfer, thereby generating the opportunity to prepare a system in a selected state with a selected population.