Characterization of a β-glucanase produced by Rhizopus microsporus var. microsporus, and its potential for application in the brewing industry

Background  

In the barley malting process, partial hydrolysis of β-glucans begins with seed germination. However, the endogenous 1,3-1,4-β-glucanases are heat inactivated, and the remaining high molecular weight β-glucans may cause severe problems such as increased brewer mash viscosity and turbidity. Increased viscosity impairs pumping and filtration, resulting in lower efficiency, reduced yields of extracts, and lower filtration rates, as well as the appearance of gelatinous precipitates in the finished beer. Therefore, the use of exogenous β-glucanases to reduce the β-glucans already present in the malt barley is highly desirable.     

A unique tautomer of 1‐n‐hexyl‐3‐phenyl‐1H‐pyrazol‐5‐ol

In the title compound, C₁₅H₂₀N₂O, the bond distances and angles are consistent with the presence of the hydroxy tautomer. This tautomer was unambiguously determined by the clear presence of a H atom bonded to oxygen, as well as the total absence of any residual electron density around the N atom in the heterocycle, thus precluding any possibility of desmotropism.     

Construction of 4D-QSAR Models for Use in the Design of Novel p38-MAPK Inhibitors

The p38-mitogen-activated protein kinase (p38-MAPK) plays a key role in lipopolysaccharide-induced tumor necrosis factor-alpha (TNF-alpha) and interleukin-1 (IL-1) release during the inflammatory process, emerging as an attractive target for new anti-inflammatory agents. Four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis [Hopfinger et al., J. Am. Chem. Soc., 119 (1997) 10509] was applied to a series of 33 (a training set of 28 and a test set of 5) pyridinyl-imidazole and pyrimidinyl-imidazole inhibitors of p38-MAPK, with IC50 ranging from 0.11 to 2100 nM [Liverton et al., J. Med. Chem., 42 (1999) 2180]. Five thousand conformations of each analogue were sampled from a molecular dynamics simulation (MDS) during 50 ps at a constant temperature of 303 K. Each conformation was placed in a 2 angstroms grid cell lattice for each of three trial alignments. 4D-QSAR models were constructed by genetic algorithm (GA) optimization and partial least squares (PLS) fitting, and evaluated by leave-one-out cross-validation technique. In the best models, with three to six terms, the adjusted cross-validated squared correlation coefficients, Q2adj, ranged from 0.67 to 0.85. Model D (Q2adj = 0.84) was identified as the most robust model from alignment 1, and it is representative of the other best models. This model encompasses new molecular regions as containing pharmacophore sites, such as the amino-benzyl moiety of pyrimidine analogs and the N1-substituent in the imidazole ring. These regions of the ligands should be further explored to identify better anti-inflammatory inhibitors of p38-MAPK.     

Three oxo complexes with a tetra­nuclear [Cu4(μ2‐Cl)6(μ4‐O)] unit

The three title compounds, namely 4‐phenyl‐1H‐imidazolium hexa‐μ₂‐chloro‐chloro‐μ₄‐oxo‐tris­(4‐phenyl‐1H‐imidazole‐κN¹)­tetra­copper(II) monohydrate, (C₉H₉N₂)[Cu₄Cl₇O(C₉H₈N₂)₃]·H₂O, hexa‐μ₂‐chloro‐μ₄‐oxo‐tetra­kis­(pyridine N‐oxide‐κO)tetra­copper(II), [Cu₄Cl₆O(C₅H₅NO)₄], and hexa‐μ₂‐chloro‐tetra­kis(2‐methyl‐1H‐imidazole‐κN¹)‐μ₄‐oxo‐tetra­copper(II) methanol trisolvate, [Cu₄Cl₆O(C₄H₆N₂)₄]·3CH₄O, exhibit the same Cu₄OCl₆ framework, where the O atom at the centre of an almost regular tetra­hedron bridges four copper cations at the corners. This group is in turn surrounded by a Cl₆ octa­hedron, leading to a rather globular species. This special arrangement of the Cu^II cations results in a diversity of magnetic behaviours.     

Easy α-alkylation of ketones with alcohols through a hydrogen autotransfer process catalyzed by RuCl2(DMSO)4

The electrophilic α-alkylation of ketones with alcohols is accomplished by a hydrogen autotransfer process catalyzed by RuCl₂(DMSO)₄. The reaction can produce either simple alkylated ketones or α,β-unsaturated ketones just by choosing the appropriate starting ketones (methyl ketones or bicyclic methylenic ketones, respectively), as well as quinolines (by using 2-aminobenzyl alcohol derivatives) or the corresponding alcohol derivatives by the addition of an extra equivalent of the initial alcohol. In the last case, after the above alkylation process reduction of the carbonyl compound takes place. A mechanistic study seems to indicate that the process goes through the oxidation of the alcohols with ruthenium (after a previous deprotonation) to yield the corresponding aldehyde and a ruthenium hydride intermediate. In turn, the aldehyde suffers a classical aldol reaction with the starting ketone to form the corresponding α,β-unsaturated ketone, which finally is reduced through a Michael-type addition by the aforementioned ruthenium hydride intermediate.     

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

The present paper proposes the application of multiwall carbon nanotubes (MWCNTs) as a solid sorbent for lead preconcentration using a flow system coupled to flame atomic absorption spectrometry. The method comprises the preconcentration of Pb (II) ions at a buffered solution (pH 4.7) onto 30 mg of MWCNTs previously oxidized with concentrated HNO₃. The elution step is carried out with 1.0 mol L⁻¹ HNO₃. The effect of the experimental parameters, including sample pH, sampling flow rate, buffer and eluent concentrations were investigated by means of a 2⁴ full factorial design, while for the final optimization a Doehlert design was employed. Under the best experimental conditions the preconcentration system provided detection and quantification limits of 2.6 and 8.6 μg L⁻¹, respectively. A wide linear range varying from 8.6 up to 775 μg L⁻¹ (r > 0.999) and the respective precision (relative standard deviation) of 7.7 and 1.4% for the 15 and 200 μg L⁻¹ levels were obtained. The characteristics obtained for the performance of the flow preconcentration system were a preconcentration factor of 44.2, preconcentration efficiency of 11 min⁻¹, consumptive index of 0.45 mL and sampling frequency estimated as 14 h⁻¹. Preconcentration studies of Pb (II) ions in the presence of the majority foreign ions tested did not show interference, attesting the good performance of MWCNTs. The accuracy of the method was assessed from analysis of water samples (tap, mineral, physiological serum and synthetic seawater) and common medicinal herbs submitted to the acid decomposition (garlic and Ginkgo Biloba). The satisfactory recovery values obtained without using analyte addition method confirms the feasibility of this method for Pb (II) ions determination in different type of samples.