Sur le groupe des homographies et des antihomographies d'une variable complexe

Sans résumé     

Spectrofluorimetric Method for the Determination of Aluminum with Alizarin Red PS

 A simple and direct spectrofluorimetric method has been developed for the determination of aluminum using alizarin red PS (1,2,4-trihydroxy 9,10-anthraquinone-3-sulfonic acid). The method is based on the strong fluorescence (480/564 nm) of Al³⁺ and alizarin red. Experimental parameters such as pH, concentration of the ligand, ionic strength of the solution, reaction time and temperature were optimized in order to maximize the analytical signal. Interferences of several ions (anions and cations) were studied and evaluated. The linear range of the method extends from 3 to 100 μg L⁻¹. Limit of detection (3s_b) was 0.9 μg L⁻¹. The method was tested with a silicate certified reference material. Interferences were eliminated by a liquid extraction with cupferron. Author for correspondence. E-mail: aucelior@rdc.puc-rio.br Received September 10, 2002; accepted January 15, 2003 Published online May 5, 2003     

Elimination of man-made radionuclides from natural waters by applying a standard coagulation-flocculation process

We studied the effectiveness of potable water treatment processes that consist of the stages of coagulation-flocculation-decantation, using iron-based coagulants, in eliminating gamma-emitting man-made radioisotopes of cesium, strontium, and americium from two natural waters with different degrees of mineralization. The resulting decontamination was found to depend on the chemical behavior of each of the radionuclides considered, on the pH at which the process of coagulation is carried out, and on the concentration of the other stable cations present. This revised version was published online in July 2006 with corrections to the Cover Date.     

Analysis of Glycosides and Aglycones of Flavonoid Compounds by Double-Development Thin-Layer Chromatography

JPC – Journal of Planar Chromatography – Modern TLC - Flavonoid glycosides are much more polar than their aglycones and the two groups of compounds are difficult to separate by planar...     

A sequential injection system for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples.

A sequential injection methodology for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples is proposed. A single manifold is used for the determination of the three analytes, and the same protocol sequence allows the sequential determination of calcium and magnesium (the sum corresponds to the water hardness). The determination of both metals is based on their reaction with cresolphtalein complexone; mutual interference is minimized by using 8-hydroxyquinoline for the determination of calcium and ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) for the determination of magnesium. Alkalinity determination is based on a reaction with acetic acid, and corresponding color change of Bromcresol Green. Working ranges of 0.5 - 5 mg dm(-3) for Ca, 0.5 - 10 mg dm(-3) for Mg, and 10 - 100 mg HCO3- dm(-3), for alkalinity have been achieved. The results for water samples were comparable to those of the reference methods and to a certified reference water sample. RSDs lower than 5% were obtained, a low reagent consumption and a reduced volume of effluent have been accomplished. The determination rate for calcium and magnesium is 80 h(-1), corresponding to 40 h(-1) per element, while 65 determinations of alkalinity per hour could be carried out.     

A note on a generalized Douglas space

Periodica Mathematica Hungarica -     

Lagrangian flows: The dynamics of globally minimizing orbits

The objective of this note is to present some results, to be proved in a forthcoming paper, about certain special solutions of the Euler-Lagrange equations on closed manifolds. Our main results extend to time dependent periodic Lagrangians with minor modifications.We have chosen the autonomous case because this formally simpler framework allows to reach more easily the core of our concepts and results. Moreover the autonomous case exhibits certain special features involving the energy as a first integral that deserve special attention. They are closely related to the link found by Carneiro [C] between the energy and Mather's action function [Ma].Reprinted by permission of Addison Wesley Longman Ltd.     

Study of the gas-phase parameters affecting the silicon-oxide film deposition induced by an ArF laser

A study of the gas-phase parameters involved in ArF laser induced chemical vapour deposition of silicon-oxide thin films is presented. A complete set of experiments has been performed showing the influence of the concentration of the precursor gases, N₂O and SiH₄, and their influence on total and partial pressures on film growth and properties. In this paper we demonstrate the ability of this LCVD method to deposit silicon oxide films of different compositions and densities by appropriate control of gas composition and total pressure. Moreover, a material specific calibration plot comprising data obtained using different preparation techniques is presented, allowing determination of the stoichiometry of SiO _x films by using FTIR spectroscopy independently of the deposition method. For the range of processing conditions examined, the experimental results suggest that chemical processes governing deposition take place mainly in the gas phase.